Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Furniwell Armless Adjustable Swivel Desk Chair. Designed for comfort and versatility, this chair is suitable for various settings including home offices, vanity areas, and general task use. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Image: The Furniwell Armless Adjustable Swivel Desk Chair in Grey Fabric, showcasing its modern design and compact form.
Safety Information
- Maximum Weight Capacity: Do not exceed a weight of 250 pounds (113 kg) on this chair. Exceeding this limit may result in damage to the chair or personal injury.
- Ensure all screws and bolts are securely tightened before use and periodically check for any loosening.
- Keep hands and fingers clear of moving parts during adjustment.
- Use the chair on a flat, stable surface to prevent tipping.
Package Contents
Please verify that all components are present before beginning assembly:
- Seat Cushion (1)
- Back Cushion (1)
- Base (1) - 5-star chrome base
- Legs (5) - for the base
- Gas Lift (1)
- Mechanism (1) - for height adjustment and swivel
- Casters (5)
- Bolts and Screws (various sizes, quantities as per instructions)
- Wrench/Allen Key (1)
Setup and Assembly
Assembly is required. Please follow the steps below carefully. An assembly video is provided for visual guidance.
Assembly Steps:
- Assemble the Base: Attach the five legs to the central base using the provided bolts and wrench. Ensure they are securely fastened.
- Attach Casters: Insert the five casters into the ends of the assembled base legs. Push firmly until they click into place.
- Install Gas Lift: Place the gas lift cylinder into the center hole of the assembled base.
- Attach Mechanism to Seat: Identify the 'FRONT' label on the underside of the seat cushion. Align the mechanism with the pre-drilled holes on the underside of the seat, ensuring the adjustment lever is positioned towards the front-right side. Secure with the appropriate bolts.
- Attach Backrest to Seat: Align the backrest with the designated brackets on the seat cushion. Secure with the remaining bolts.
- Connect Seat to Gas Lift: Carefully place the assembled seat (with mechanism and backrest) onto the top of the gas lift cylinder. Press down firmly to secure.
Video: Detailed assembly tutorial for the Furniwell Armless Desk Chair, demonstrating each step from unboxing to final setup.
Operating Instructions
- Height Adjustment: To adjust the chair's height, pull the lever located under the seat upwards. While holding the lever, stand up to raise the chair or sit down to lower it. Release the lever at your desired height. The adjustable height range is 17.72-21.26 inches.
- 360° Swivel: The chair seat is designed to rotate a full 360 degrees, allowing for easy movement and access within your workspace without needing to reposition the entire chair.
- Movement: The five silent casters allow for smooth and quiet movement across hard floor surfaces.
Video: A short demonstration of the chair's height adjustment and smooth movement capabilities.
Maintenance
- Cleaning Fabric: For general cleaning, use a soft brush or vacuum cleaner to remove dust and loose debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
- Cleaning Base and Casters: Wipe the chrome base with a soft, damp cloth. Clean casters regularly to remove hair and debris that may hinder smooth rolling.
- Periodic Checks: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as necessary.
Troubleshooting
- Chair does not adjust height: Ensure the gas lift is correctly installed and the lever mechanism is fully engaged. If the issue persists, the gas lift may need replacement.
- Chair wobbles: Check that all bolts connecting the seat, backrest, and base are securely tightened. Ensure the chair is on a level surface.
- Casters do not roll smoothly: Inspect casters for accumulated debris (hair, lint) and clean them thoroughly. Ensure they are properly inserted into the base legs.
- Squeaking noises: Apply a small amount of silicone lubricant to moving parts, especially where the gas lift meets the mechanism and the base.
Specifications
| Feature | Detail |
|---|---|
| Brand | Furniwell |
| Model Name | Office Chair (GEWSF0181) |
| Color | Grey |
| Material Type | Fabric (Textile), Sponge (Fill) |
| Product Dimensions | 18.15"D x 17.72"W x 34.26"H |
| Adjustable Height Range | 17.72 - 21.26 inches |
| Maximum Weight Recommendation | 250 Pounds |
| Item Weight | 16.98 pounds |
| Swivel | 360° |
| Arm Style | Armless |
| Included Components | Caster |
Image: Product dimensions and maximum weight capacity are clearly illustrated.
Additional Features
- Comfortable Padded Seat: The seat cushion and backrest are filled with high-density sponge, providing a comfortable sitting experience and resisting deformation, ideal for extended use.
- Simple Fashion Design: Features a modern striped design and skin-friendly, breathable fabric, adding energy and character to any space.
- Space-Saving Armless Design: The ergonomic armless design allows the chair to be easily pushed under most tables, optimizing space.
Image: Close-up of the comfortable padded seat and supportive backrest.
Image: The ergonomic armless design for better space saving.
Image: Features including adjustable height, 360° smooth swivel, and silent casters.
Warranty and Support
Furniwell is committed to providing high-quality products. For any questions regarding assembly, operation, or if you encounter any issues with your chair, please contact Furniwell customer support. Details on warranty coverage and how to reach support can typically be found on the product packaging or the official Furniwell website.