AYRELY 4.5" Analog Alarm Clock

Introduction

Thank you for choosing the AYRELY 4.5" Analog Alarm Clock. This manual provides essential information for the safe and efficient use of your new clock. Please read these instructions thoroughly before operating the device and retain them for future reference.

The AYRELY 4.5" Analog Alarm Clock, featuring a classic design and vibrant orange-yellow finish.

Safety Information

• Keep the clock away from water and high humidity to prevent damage.
• Avoid exposing the clock to extreme temperatures or direct sunlight for prolonged periods.
• Do not attempt to disassemble or repair the clock yourself. Refer to qualified service personnel.
• Dispose of used batteries responsibly according to local regulations.

Package Contents

Please check the package for the following items:

• 1 x AYRELY 4.5" Analog Alarm Clock (Model: AYALCK-TABLE)
• 1 x User Manual

Note: 1 AA battery is required for operation and is not included in the package.

Product Overview

Familiarize yourself with the components of your AYRELY Analog Alarm Clock.

Rear view of the clock, highlighting the controls for time and alarm settings, and the battery compartment.

1. Nightlight Button: Press to illuminate the clock face temporarily.
2. Alarm ON/OFF Switch: Slide to activate or deactivate the alarm function.
3. Set Alarm Time Dial: Rotate to adjust the alarm hand to your desired wake-up time.
4. Set Clock Time Dial: Rotate to adjust the hour and minute hands to the current time.
5. Battery Compartment: Holds one AA battery (not included).

Setup

1. Install Battery

1. Open the battery compartment cover on the back of the clock.
2. Insert one new AA battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Close the battery compartment cover securely.

For a visual guide on battery installation, please refer to the video below:

2. Set Current Time

Rotate the Set Clock Time Dial (labeled with a clock icon) on the back of the clock to set the current hour and minute. The clock features a silent, non-ticking quartz movement for accurate timekeeping.

3. Set Alarm Time

Rotate the Set Alarm Time Dial (labeled with a bell icon) on the back of the clock to set your desired alarm time. The alarm hand is typically a distinct color (e.g., red or yellow) to differentiate it from the hour and minute hands.

Operating Instructions

Activating/Deactivating the Alarm

To activate the alarm, slide the Alarm ON/OFF Switch to the "ON" position. To deactivate the alarm, slide the switch to the "OFF" position. The alarm features a gentle, increasing volume to ensure a pleasant wake-up.

Using the Nightlight Function

Press and hold the Nightlight Button (labeled with a light bulb icon) on the back of the clock to temporarily illuminate the clock face. This feature is useful for checking the time in low-light conditions without disturbing your sleep with a bright screen.

The silent, non-ticking movement ensures a peaceful sleeping environment.

For a comprehensive overview of the clock's features and operation, please watch the video below:

Maintenance

Cleaning

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.

Battery Replacement

When the clock starts losing time or the alarm weakens, it's time to replace the battery. Follow the battery installation steps in the "Setup" section to replace the AA battery.

Troubleshooting

Specifications

Warranty and Support

AYRELY products are manufactured with quality and care. For any questions, concerns, or support needs regarding your AYRELY Analog Alarm Clock, please refer to your purchase documentation or contact the retailer where the product was purchased. Specific warranty details may vary by region and retailer.