1. Important Safety Instructions
Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater, and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner. Discard heater or return to an authorized service facility for examination and/or repair.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an automatic Overheat Protection feature. If the heater overheats, it will automatically shut off. Unplug the heater, wait 10 minutes for it to cool, then plug it back in.
- The heater also includes a Tip-Over Protection switch, which automatically turns off the heater if it is accidentally knocked over.
- The exterior cabinet features a Cool Touch Exterior, ensuring safe operation even when the heater is in use.
- This appliance is equipped with a Child Lock function to prevent unintended operation.
2. Product Overview
The WEWARM HT1198QX Infrared Space Heater is designed to provide efficient and comfortable heating for indoor spaces. It features multiple heat settings, a programmable timer, and remote control for convenient operation.
Image: The WEWARM HT1198QX Infrared Space Heater, showcasing its front panel with digital display, heating elements, and the included remote control.
Key Components:
- Control Panel: Located on the top front, with digital display and control buttons.
- Infrared Heating Elements: Six quartz infrared elements for efficient heat distribution.
- Air Intake/Outlet: Located at the front and bottom for optimal airflow.
- Remote Control: For convenient operation from a distance.
- Integrated Handles: For easy portability.
Image: The WEWARM HT1198QX Infrared Space Heater, illustrating its compact dimensions of 10.03 inches width, 9.84 inches depth, and 10.60 inches height.
3. Setup
- Unpack the Heater: Carefully remove the heater from its packaging. Retain packaging for storage or shipping if needed.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from walls, furniture, and other objects. Do not place the heater on soft surfaces like rugs or carpets that could block the air intake. This heater is for indoor use only.
- Power Connection: Plug the power cord directly into a grounded 120V, 60Hz electrical outlet. Do not use extension cords or power strips. Ensure the outlet is rated for 12.5 Amps.
4. Operating Instructions
4.1 Control Panel and Remote Control
The heater can be operated using the control panel on the unit or the included remote control. The remote control provides visual feedback via an LED indicator.
Image: The WEWARM HT1198QX Infrared Space Heater positioned in a living room, with the remote control shown separately, indicating its wireless functionality.
Control Buttons:
- Power Button (⏻): Turns the heater ON or OFF.
- Mode Button (☀): Cycles through heat settings (High, Low, ECO).
- Temperature Up (▲): Increases the desired temperature.
- Temperature Down (▼): Decreases the desired temperature.
- Timer Button (⏱): Activates and sets the programmable timer.
- Child Lock Button (🔒): Engages or disengages the child lock feature.
4.2 Power On/Off
- To turn ON the heater, press the Power button (⏻) on the control panel or remote. The display will illuminate.
- To turn OFF the heater, press the Power button (⏻) again. The fan may continue to run for a short period to cool down the elements before completely shutting off.
4.3 Heat Settings
The heater offers three heat settings to suit your comfort needs:
Image: The WEWARM HT1198QX Infrared Space Heater illustrating its three energy-efficient modes: HIGH (1500W), ECO, and LOW (1000W), with heat emanating from the unit.
- High (1500W): Provides maximum heat output for rapid warming.
- Low (1000W): Offers a lower heat output for sustained warmth and energy efficiency.
- ECO Mode: Automatically adjusts the heat output to maintain a consistent temperature of 68°F (20°C), optimizing energy consumption.
Press the Mode button (☀) to cycle through these settings.
4.4 Temperature Control
The heater features an electronic thermostat allowing you to set your desired room temperature between 50°F and 90°F (10°C and 32°C).
Image: A family relaxing in a living room, with the WEWARM HT1198QX Infrared Space Heater in the foreground, illustrating the ability to set the desired temperature between 50°F and 90°F for comfortable heating.
- With the heater ON, use the Temperature Up (▲) or Temperature Down (▼) buttons to adjust the desired temperature.
- The display will show the set temperature, then revert to showing the current room temperature.
- The heater will cycle ON and OFF to maintain the set temperature.
4.5 Timer Function
The 12-hour programmable timer allows you to set the heater to turn ON or OFF automatically after a specified duration.
Image: The WEWARM HT1198QX Infrared Space Heater next to a bed, with an overlay indicating a '12h' timer, suggesting its use for timed heating during sleep.
- To set Auto-OFF: While the heater is ON, press the Timer button (⏱). The display will flash '00'. Use the Temperature Up (▲) or Temperature Down (▼) buttons to set the desired number of hours (1-12) before the heater turns off. The timer will activate after a few seconds.
- To set Auto-ON: While the heater is OFF, press the Timer button (⏱). The display will flash '00'. Use the Temperature Up (▲) or Temperature Down (▼) buttons to set the desired number of hours (1-12) before the heater turns on. The timer will activate after a few seconds.
4.6 Child Lock Feature
The Child Lock feature prevents accidental changes to settings or turning the heater on/off, providing added safety.
- To activate the Child Lock, press and hold the Child Lock button (🔒) for 3 seconds. An indicator light or symbol will appear on the display.
- While Child Lock is active, all other buttons on the control panel and remote control will be unresponsive.
- To deactivate the Child Lock, press and hold the Child Lock button (🔒) again for 3 seconds. The indicator will disappear.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Air Filter: Periodically check and clean the air filter (if applicable, typically located at the rear or side intake). Remove any accumulated dust or debris using a vacuum cleaner or by rinsing with water (ensure it's completely dry before reinserting).
- Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
6. Troubleshooting
If your heater is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, power switch off, overheat protection activated, tip-over switch activated. | Ensure power cord is securely plugged in. Check household circuit breaker. Press power button. Unplug, wait 10 mins, then replug if overheat protection engaged. Ensure heater is on a flat surface. |
| Heater blows cold air. | Temperature setting too low, ECO mode active, heating elements not engaged. | Increase the desired temperature setting. Check if ECO mode is active and adjust if necessary. Ensure the heater is in a heat mode (High or Low). |
| Remote control not working. | Batteries dead, remote out of range, obstruction. | Replace batteries in the remote control. Ensure you are within range and there are no obstructions between the remote and the heater. |
| Heater makes unusual noise. | Dust buildup, loose component. | Unplug and clean the heater, especially air intake/filter. If noise persists, discontinue use and contact support. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | WEWARM |
| Model Number | HT1198QX |
| Power Output | 1000W / 1500W |
| Voltage | 120 Volts |
| Amperage | 12.5 Amps |
| Temperature Range | 50°F - 90°F (10°C - 32°C) |
| Heating Coverage | Up to 400 sq.ft |
| Product Dimensions | 9.84"D x 10.03"W x 12.6"H |
| Item Weight | 6.39 pounds |
| Special Features | Child Lock, Cool Touch Exterior, Electronic Thermostat, Overheat Protection, Tip-Over Protection, Remote Control, 12-Hour Timer |
| UPC | 760822184448 |
8. Warranty and Support
This WEWARM HT1198QX Infrared Space Heater comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including duration and coverage.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or WEWARM customer service. Contact information can typically be found on the product packaging or the official WEWARM website.
9. Video Resources
At this time, no official product videos from the seller are available for embedding. Please refer to the written instructions and diagrams provided in this manual for guidance.