1. Introduction
This manual provides essential information for the safe and effective use of your FITE ON 6ft UL 18AWG AC Internal Power Cord Cable Lead. This power cord is designed for compatibility with specific Sceptre television models, including PMTV58GA, POTV83BB, PSTV58GA, and Q1TV83AB, connecting to their internal power boards. Please read this manual thoroughly before installation and use.
2. Safety Information
Your FITE ON power cord is designed with safety in mind and is approved for sale in the US and Canada by Underwriters Laboratories (UL). It incorporates multiple protection features to ensure safe operation:
- Short Circuit Protection: Prevents damage from electrical shorts.
- Over-Current Protection: Safeguards against excessive current flow.
- Over-Voltage Protection: Protects against voltage surges.
- Overload Protection: Prevents damage from drawing too much power.
- Over-Temperature Protection: Monitors and prevents overheating.
Important Safety Precautions:
- Always ensure the power cord is dry before connecting it to any device or power source.
- Do not store or use the adapter in hot or cold environments.
- Ensure adequate ventilation around the power cord and connected device during prolonged use.
- Verify that the connector end and your device's model are compatible before purchasing and connecting.
3. Product Overview
The FITE ON 6ft UL 18AWG AC Internal Power Cord Cable Lead is a black, 6-foot (1.8-meter) cable designed to provide AC power to compatible Sceptre devices. It features a standard two-prong AC plug on one end and a specific internal connector for the device's power board on the other.
Image 3.1: The FITE ON 6ft UL 18AWG AC Internal Power Cord, coiled, displaying both the standard two-prong AC plug and the internal connector.
Image 3.2: An angled perspective of the power cord, highlighting the design of both the external AC plug and the internal power board connector.
4. Setup
Follow these steps to properly connect your FITE ON power cord:
- Verify Compatibility: Before connecting, ensure that your Sceptre device model (e.g., PMTV58GA, POTV83BB, PSTV58GA, Q1TV83AB) is listed as compatible with this power cord. Also, visually inspect the internal connector on your device's power board to match it with the cable's connector.
- Power Off Device: Ensure the Sceptre device is completely powered off and unplugged from any existing power source.
- Connect to Device: Carefully insert the internal connector end of the FITE ON power cord into the corresponding port on your Sceptre device's power board. Ensure a firm and secure connection.
- Connect to Power Outlet: Plug the standard two-prong AC plug into a functional wall outlet or surge protector.
- Power On Device: Once both ends are securely connected, you may power on your Sceptre device.
Image 4.1: The power cord coiled, illustrating its length and flexibility for installation.
5. Operating
Once properly installed, the FITE ON power cord operates automatically to supply power to your compatible Sceptre device. No user intervention is required for its function beyond initial connection.
6. Maintenance
To ensure the longevity and safe operation of your power cord:
- Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cable with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply.
- Inspection: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent prongs. If damage is observed, discontinue use immediately and replace the cable.
Image 6.1: A top-down view of the power cord, demonstrating its compact coiled form for storage or transport.
7. Troubleshooting
If your device is not receiving power after connecting the FITE ON power cord, consider the following:
- Check Connections: Ensure both the internal connector to the device's power board and the AC plug to the wall outlet are securely and fully inserted.
- Test Outlet: Plug another known working appliance into the wall outlet to confirm the outlet is functional.
- Device Compatibility: Double-check that your Sceptre device model is indeed compatible with this specific power cord.
- Inspect Cable: Look for any visible damage to the power cord. If damaged, replace it.
If issues persist, please refer to the support section.
8. Specifications
| Feature | Specification |
|---|---|
| Cable Length | 6 feet (1.8 meters) |
| Wire Gauge | 18 AWG |
| Input Voltage | 100-240V AC |
| Input Frequency | 50-60 Hz |
| Certifications | UL Listed |
| Protection Features | OVP, OCP, SCP, Overload, Over-Temperature |
| Item Weight | 4 ounces |
| Package Dimensions | 4 x 3 x 2 inches |
| Color | Black |
9. Warranty and Support
For any questions or further assistance regarding your FITE ON 6ft UL 18AWG AC Internal Power Cord Cable Lead, please feel free to contact the manufacturer, FITE ON. While specific warranty details are not provided in this manual, customer support is available to address your concerns.
Contact Information: Refer to your purchase documentation or the FITE ON brand store on Amazon for current support contact methods.