ALLIMITY YR-M10 Universal Air Conditioner Remote Control User Manual

1. Introduction

This user manual provides detailed instructions for the ALLIMITY YR-M10 universal remote control for air conditioners. This remote is designed to replace your original remote and offers full functionality for various compatible Daitsu, Haier, and HEC air conditioning units. No programming is required; simply insert batteries to begin operation.

2. Product Overview

Familiarize yourself with the layout and functions of your new remote control.

Image 2.1: Front view of the ALLIMITY YR-M10 remote control, showing the display and all control buttons.

Image 2.2: Angled view of the ALLIMITY YR-M10 remote control, providing a clearer perspective of the button arrangement.

Image 2.3: Back view of the ALLIMITY YR-M10 remote control, illustrating the battery compartment cover.

3. Setup

3.1 Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards to open it.
3. Insert two new AAA alkaline batteries (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Note: No programming is required. The remote control is ready for use immediately after battery installation.

4. Operating Instructions

This remote control covers all essential functions of your original air conditioner remote. Point the remote control directly at the air conditioner unit when operating.

• ON/OFF Button: Press to turn the air conditioner unit on or off.
• MODE Button: Cycles through operating modes such as Cool, Heat, Fan, Dry, Auto.
• TEMP ▲/▼ Buttons: Adjust the desired temperature setting.
• FAN Button: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
• SWING Button: Controls the louver swing function for air direction.
• SLEEP Button: Activates or deactivates the sleep mode for comfortable night operation.
• HEALTH Button: Activates or deactivates health-related functions (if supported by your AC unit).
• TIMER Button: Sets the on/off timer for the air conditioner.
• CLOCK Button: Sets the current time on the remote control display.
• LOCK Button: Locks the remote control buttons to prevent accidental changes.
• RESET Button: Resets the remote control to factory default settings. Use a pointed object to press this button.

5. Compatible Air Conditioner Models

This remote control is compatible with a wide range of Daitsu, Haier, and HEC air conditioner models, including but not limited to:

• YR-M05, YR-M07, YR-M10, YL-M05, YR-M09
• 9AHH0144, 9AHH1077
• DS-7UC, DS-9UC, DS-12UC, DS-7HTA, DS-9HTA, DS-12HTA, DS-18HTA
• HSU-12HD03, HSU-12HD03/R2, HSU-07LD03/R1, HSU-09LD03/R1, HSU-12LD03/R1, HSU-18LD03/R1
• HSU-07RD03/R1, HSU-09RD03/R1, HSU-12RF03/R1, HSU-18RD03/R1
• HSU-09RE03/R2, HSU-12RE03/R2, HSU-18RE03/R2, HSU-22RE03/R2
• HSU-09RF03/R1, HSU-12RF03/R1, HSU-09RF03/R2, HSU-12RF03/R2
• HSU-09HEA03, HSU-12HEA03, HSU-18HEAO3, HSU-22HEA03, HSU-24HEAO3
• HSU-09LEA13-F, HSU-12LEA13-F, HSU-09LEA13-W, HSU-12LEA13-W, HSU-18LEA13-W, HSU-22LEA13-W, HSU-24LEA13-W
• HSU-12LEA13-M, HSU-18LEA13-M, HSU-09LEA13-M, HSU-24LEA13-M
• HSU-09RQ03/R2, HSU-09RF03/R2, HSU-12RF03/R2, HSU-12RD03/R1, HSU-09RD03/R1, HSU-07RD03/R1

If your air conditioner model is not listed, but your original remote control looks similar, this remote may still be compatible.

6. Troubleshooting

• Remote not responding:
  • Ensure batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new alkaline batteries.
  • Make sure there are no obstructions between the remote control and the air conditioner unit.
  • Ensure you are within the maximum operating range (approximately 10 meters).
• Some functions not working:
  • While this remote is universal, some advanced or specific functions of your particular AC unit might not be fully supported if they differ significantly from standard controls.
  • Try pressing the RESET button with a pointed object to restore default settings.
• Display is dim or blank:
  • Replace batteries immediately.

7. Specifications

8. Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries when the remote's performance degrades or the display becomes dim. Remove batteries if the remote will not be used for an extended period to prevent leakage.
• Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.

9. Warranty and Support

For any issues or questions regarding your ALLIMITY YR-M10 remote control, please refer to the retailer where the product was purchased. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty details may vary by region and retailer.

10. Product Videos

Watch these videos for additional information and visual guidance on the product.