Charmstep TS10/4+32g

Charmstep Android 12 Car Multimedia Player User Manual

Model: TS10/4+32g (for Toyota Camry 7 XV 40 50 2006-2011)

1. Introduction

Thank you for choosing the Charmstep Android 12 Car Multimedia Player. This manual provides detailed instructions for the installation, operation, and maintenance of your new car stereo system. Please read this manual thoroughly before installation and use to ensure proper function and to maximize your user experience. This unit is designed for Toyota Camry 7 XV 40 50 models from 2006 to 2011.

2. Safety Information

3. Package Contents

Please check the package for the following items:

4. Product Overview

The Charmstep Android 12 Car Multimedia Player offers a range of features to enhance your driving experience. Available in various configurations, each model provides specific functionalities.

4.1 Model Variations and Features

Refer to the table below for a comparison of features across different models (TS711, TS722, TS18, TS10).

Comparison table of Charmstep car multimedia player models TS711, TS722, TS18, and TS10, detailing their internet connectivity, operating system, core processor, RAM/ROM, Carplay/Android Auto support, screen type, resolution, DSP, RDS, Full AV Output, Bluetooth module, cooling fan, AI voice, and 360 panoramic camera support.

Image: Feature comparison table for Charmstep car multimedia player models.

Additional features like AI Voice Control, Full AV Output (TS10/TS18 only), DAB+, and OBDII require additional purchase of accessories.

5. Setup and Installation

This unit is designed for plug-and-play installation in Toyota Camry 7 XV 40 50 models from 2006-2011. No cutting of original cables is required. However, professional installation is highly recommended.

5.1 Pre-Installation Check

5.2 Installation Steps (General Guide)

  1. Remove Original Unit: Carefully remove the existing car stereo and trim panels from your Toyota Camry dashboard. Refer to your vehicle's service manual for specific instructions.
  2. Connect Wiring Harness: Connect the provided wiring harness to the vehicle's existing wiring. Ensure all connections are secure. If your vehicle has a power amplifier or optical fiber, additional considerations may be needed; contact support if unsure.
  3. Install GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield.
  4. Connect USB and RCA Cables: Route the USB and RCA cables to desired locations (e.g., glove compartment) for easy access.
  5. Install Rear View Camera: Mount the included rear view camera at the back of your vehicle. Connect its video cable to the "CAM IN" port on the multimedia player and its power cable to the reverse light circuit.
  6. Mount New Unit: Secure the Charmstep multimedia player into the dashboard opening using the provided frame and mounting brackets.
  7. Reconnect Battery: Once all connections are made and secured, reconnect the vehicle's battery.
  8. Initial Power On and Test: Turn on the vehicle and the multimedia player. Test all functions (radio, GPS, Bluetooth, camera, steering wheel controls) to ensure proper operation.
Image showing the Charmstep Android 12 Car Multimedia Player installed in a Toyota Camry dashboard, with a comparison of the dashboard before and after installation.

Image: Before and after installation of the car multimedia player in a Toyota Camry.

6. Operating Instructions

This section details the operation of various features of your Charmstep Android 12 Car Multimedia Player.

6.1 Basic Functions (All Models)

6.2 Advanced Functions (TS10, TS18 Models)

6.3 Camera and DVR Functions

7. Maintenance

8. Troubleshooting

ProblemPossible CauseSolution
Unit does not power on.Loose power connection, blown fuse, vehicle battery issue.Check all power cable connections. Inspect vehicle fuses. Ensure vehicle battery is charged.
No sound.Volume too low, mute activated, speaker wiring issue, incorrect audio output settings.Increase volume. Check if mute is active. Verify speaker wiring. Adjust audio output settings in the system.
GPS signal lost or inaccurate.GPS antenna obstruction, antenna not properly connected, unit in an area with poor satellite reception.Ensure GPS antenna has a clear view of the sky. Check antenna connection. Move to an open area.
Bluetooth not connecting.Bluetooth not enabled on unit or phone, device not in pairing mode, interference.Ensure Bluetooth is enabled on both devices. Put phone in pairing mode. Restart both devices.
Rear view camera not displaying.Camera not powered, video cable loose, incorrect camera input selected.Check camera power connection (reverse light). Verify video cable connection. Ensure correct camera input is selected in settings.
Touchscreen unresponsive.System freeze, temporary software glitch.Restart the unit (press and hold power button). If issue persists, perform a factory reset (data will be lost).

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Charmstep customer support for assistance.

9. Specifications

FeatureDetails (Model TS10/4+32g)
SystemAndroid 12.0
Screen Size9 inch
Screen TypeQLED screen
Screen Resolution1280*720
CPU8-Core 1.8GHz
RAM + ROM4GB RAM + 32GB ROM
ConnectivityWIFI (5Ghz), 4G LTE (SIM card support), Bluetooth 5.0
NavigationBuilt-in GPS, supports online/offline maps
Smartphone IntegrationBuilt-in Wireless Carplay & Android Auto
Audio ProcessingBuilt-in DSP Processor
RadioAM/FM RDS (Europe)
CoolingBuilt-in Cooling Fan
Camera InputRear View Camera (AHD 1080P support), ADAS DVR (optional)
USB Ports2x USB Cables
Audio OutputRCA ports, Full AV Output (optional)
Special FeaturesSteering Wheel Control, Split Screen, AI Voice Control (optional), Multiple Language Support

10. Warranty and Support

Charmstep products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, installation queries, or troubleshooting assistance, please contact Charmstep customer service through the contact information provided at the point of purchase or on the official Charmstep website.

When contacting support, please have your product model number (TS10/4+32g) and purchase date available.

Related Documents - TS10/4+32g

Preview SYFT7210 Hanlander Radio Installation Guide for Toyota Highlander
Comprehensive installation guide for the SYFT7210 Hanlander Radio, designed for Toyota Highlander models from 2014-2019. Covers wiring, connections, CANbus setup, and troubleshooting for features like JBL amplifier and backup camera.
Preview ViaBecs SYFT7172M Tundra Radio Installation Guide
Comprehensive installation guide for the ViaBecs SYFT7172M Tundra Radio, covering factory radio checks, backup camera connection, wiring diagrams, and frequently asked questions for Toyota Tundra and Sequoia models.
Preview ViaBecs SYFT7198L Hanlander Radio Installation Guide for Toyota Highlander
Comprehensive installation guide for the ViaBecs SYFT7198L Hanlander car radio head unit, covering factory radio identification, harness connections, backup camera setup, and FAQs for Toyota Highlander models.
Preview BMW 3 Series E46 Installation Manual - Eonon Head Unit
Step-by-step installation guide for an Eonon head unit in a BMW 3 Series 1999-2004 (E46). Covers removal of factory components and installation of the new unit.
Preview Car Stereo System Product Manual
A comprehensive guide to the features and operation of the car stereo system, including navigation, Bluetooth, audio settings, and more.
Preview ViaBecs SYFT7210 Highlander Radio Installation Guide
Comprehensive installation guide for the ViaBecs SYFT7210 Highlander car stereo, covering wiring, setup, and common FAQs for 2014-2019 Toyota Highlander models.