1. Introduction
This manual provides essential information for the safe and efficient operation of your EVDANCE EV Charger Level 1/2 6-16A Adjustable. Please read this manual thoroughly before using the product and retain it for future reference. This charger is designed to provide convenient and flexible charging solutions for electric vehicles (EVs) and plug-in hybrid vehicles (PHEVs) compatible with the J1772 standard.
2. Safety Information
Always adhere to the following safety guidelines to prevent injury or damage to the product and your vehicle:
- Ensure the charging cable is not damaged before each use. Do not use if the cable or connector is frayed, broken, or exposed.
- Do not attempt to open, disassemble, or modify the charger. Servicing should only be performed by qualified personnel.
- Keep the charger away from open flames, water, and extreme temperatures.
- Ensure the power outlet used is properly grounded and rated for the selected charging current.
- Avoid placing heavy objects on the charging cable or driving over it.
- This charger is IP66 waterproof, meaning it is protected against powerful water jets. However, avoid submerging it in water.
- The charger incorporates 10 intelligent safety protections, including overcurrent, overvoltage, leakage, overheat, overcharge, lightning, grounding, and undervoltage protection.
The product is FCC and CE certified, and its housing has a UL94V-0 fire rating, indicating compliance with safety standards.
3. Package Contents
Verify that all items are present in your package:
- 1x EVDANCE 16A Adjustable EV Charger (Model EV-ACS1602U)
- 1x NEMA 6-20 to 5-15 Adapter
- 1x Portable Bag
- 1x User Manual (this document)
4. Product Features
The EVDANCE EV Charger offers a range of features designed for efficient and safe electric vehicle charging:
- Level 1 & Level 2 Charging: Compatible with both 110V (Level 1) and 240V (Level 2) power sources.
- Adjustable Current: Offers flexible charging currents from 6A to 16A to match your wall circuit and charging needs.
- Universal Compatibility: Equipped with a J1772 connector, compatible with most North American standard EVs and PHEVs. (Note: Tesla vehicles require a separate SAE J1772 adapter, not included).
- Dual Plug Options: Includes both NEMA 6-20 (220V/240V) and NEMA 5-15 (110V) plugs for versatile use.
- Extended Cable Length: Features a 25-foot (7.6m) charging cable for convenient reach.
- Intuitive LED Display: Provides real-time charging status, current, voltage, power, time, and electricity consumption.
- Advanced Safety: Built-in intelligent chip monitors charging status and offers 10 types of protection.
- Durable Design: IP66 waterproof rating and UL94V-0 fire rating ensure reliability in various conditions.
- Portable: Comes with a carrying bag for easy transport and storage.
5. Setup and Installation
Follow these steps to set up your EVDANCE EV Charger:
- Choose the Right Plug: Identify the appropriate power outlet (NEMA 5-15 for 110V or NEMA 6-20 for 220V/240V) and attach the corresponding plug to the charger's power cable.
- Connect to Power: Insert the charger's power plug firmly into the wall outlet. Ensure the connection is secure.
- Prepare Vehicle: Open your electric vehicle's charging port.
- Connect to Vehicle: Insert the J1772 connector into your vehicle's charging port until it clicks into place.
For Tesla vehicles, a separate SAE J1772 adapter (not included) is required to connect the charger to the vehicle's charging port.
6. Operating Instructions
Once the charger is connected to both the power outlet and your vehicle, follow these steps to begin charging and adjust settings:
- Power On: The charger will automatically power on when connected to a live outlet. The LED display will illuminate.
- Adjust Charging Current: To adjust the current, press and hold the 'A' button on the charger for 3 seconds. The current setting on the display will begin to flash.
- Select Current: While the current setting is flashing, short press the 'A' button repeatedly to cycle through available current options (6A, 8A, 10A, 12A, 16A).
- Confirm Selection: After selecting your desired current, wait for 5 seconds. The display will stop flashing, and the charger will begin charging at the selected current. (Note: When using a NEMA 5-15 outlet, the current can be adjusted to a maximum of 12A).
- Monitor Charging: The LED display will show real-time charging information. Refer to Section 7 for LED indicator meanings.
- Stop Charging: To stop charging, simply disconnect the J1772 connector from your vehicle. The charger will automatically cease operation.
7. LED Indicators and Troubleshooting
The charger features an LED display and indicator light to communicate its status. Understanding these indicators is crucial for proper operation and troubleshooting.
LED Display Information:
The digital display shows:
- Charging Current (e.g., 16A)
- Charging Voltage (e.g., 240V)
- Charging Power (e.g., 3.8kW)
- Charging Time
- Electricity Consumption (e.g., 3.8kWh)
Indicator Light Meanings:
| Color | Description |
|---|---|
| Green (Solid) | Charging |
| Green (Blinking) | Fully Charged |
| Blue (Solid) | Standing by |
| Blue (Blinking) | EV Connected (Awaiting Charge) |
| Red (Solid) | General Fault / Circuit Concern |
| Red (Blinking) | Ground Fault |
Troubleshooting:
- Charger not starting: Ensure both the power plug and the J1772 connector are fully inserted. Check the wall outlet for power.
- Red indicator light: A solid red light indicates a general fault or circuit concern. A blinking red light indicates a ground fault. Disconnect the charger, check all connections, and try again. If the issue persists, consult a qualified electrician or contact customer support.
- Slow charging rate: Verify the selected current setting on the charger's display. Ensure the wall outlet is providing adequate power for the desired charging level (e.g., 240V for higher rates).
- Display not working: Ensure the charger is properly connected to a live power source. If the issue persists, contact customer support.
8. Maintenance
Proper maintenance ensures the longevity and optimal performance of your EV charger:
- Cleaning: Wipe the charger unit and cable with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the connectors are free of dust and debris.
- Storage: When not in use, store the charger in its portable bag in a dry, cool place, away from direct sunlight and extreme temperatures. Avoid coiling the cable too tightly.
- Cable Inspection: Regularly inspect the charging cable and connectors for any signs of wear, damage, or corrosion. Replace if any damage is found.
- Environmental Conditions: While the charger is IP66 waterproof, prolonged exposure to harsh weather conditions should be minimized when possible.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | EVDANCE |
| Model Number | EV-ACS1602U |
| Charging Level | Level 1 / Level 2 |
| Adjustable Current | 6A, 8A, 10A, 12A, 16A |
| Input Voltage | 110V-240V AC |
| Output Voltage | 120V / 240V AC (depending on input) |
| Connector Type | J1772 (Type 1) |
| Power Plugs | NEMA 6-20, NEMA 5-15 (with adapter) |
| Cable Length | 25 feet (7.6 meters) |
| Waterproof Rating | IP66 |
| Safety Certifications | FCC, CE |
| Fire Rating | UL94V-0 |
| Item Weight | 6.97 pounds (3.17 kg) |
| Product Dimensions (Control Box) | Approx. 300 x 3.5 x 8 inches (This seems to be overall product dimensions, not just control box) |
10. Warranty and Support
The EVDANCE EV Charger (Model EV-ACS1602U) comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact EVDANCE customer support through the platform where you purchased the product. Please have your purchase details and product model number ready when contacting support.