1. Product Overview
The ELEGOO Mars 4 Ultra is a high-performance MSLA (Masked Stereolithography) 3D printer designed for detailed resin printing. It features a 9K monochrome LCD screen, a powerful Linux operating system, and convenient Wi-Fi connectivity for efficient operation.

Figure 1: ELEGOO Mars 4 Ultra 3D Printer and a sample print.
Key Features:
- 9K Mono LCD Screen: Equipped with a 7-inch 9K mono LCD, offering an impressive 8520 x 4320 resolution and an 18 µm XY resolution for sharp, detailed models. The screen is protected by 9H tempered glass for durability.
- Powerful Linux Operating System: Integrated with 4G RAM, the Linux OS ensures faster file loading, smoother operation, and efficient resource management.
- Wi-Fi Connectivity: Seamless file transfer via built-in Wi-Fi, supporting both 2.4G and 5G networks with transfer speeds of 6-10 Mbps.
- Effortless 4-Point Leveling: Simplifies setup, requiring only a single leveling process for consistent, perfect prints. The laser-sculpted build plate enhances model adhesion, reducing print failures.
- Advanced ACF Film: Features a new ACF film with reduced release tension, contributing to a high print success rate even at faster printing speeds.
- User-Friendly Touchscreen: A 4-inch HD IPS touchscreen with 800x480 pixels resolution and support for 12 languages for easy navigation.
- Purified Printing Environment: Includes a plug-in air purifier with an upgraded activated carbon filter to effectively reduce resin odors during printing.
- Robust All-Metal Body: Enhances printer stability and durability. The central plate is designed with a raised step to prevent resin from flowing into internal components.
2. What's in the Box
Your ELEGOO Mars 4 Ultra MSLA 3D Printer package includes the following items:
- ELEGOO Mars 4 Ultra MSLA 3D Printer
- Build Plate
- Resin Vat
- USB Drive
- Power Adapter
- Tool Kit (Allen wrenches, scraper, etc.)
- Air Purifier
- User Manual
3. Setup and Initial Operation
3.1 Unboxing and Placement
- Carefully remove all components from the packaging.
- Place the printer on a stable, level surface away from direct sunlight and dust. Ensure adequate ventilation.
- Remove any protective films or packaging materials from the printer.
3.2 Power Connection and Initial Boot
- Connect the power adapter to the printer and a suitable power outlet.
- Press the power button on the front of the printer. The ELEGOO logo will appear on the touchscreen as the system boots up.
3.3 Leveling the Build Plate
The Mars 4 Ultra features an effortless 4-point leveling system. Follow these steps for initial calibration:
- Ensure the resin vat is removed from the printer.
- Loosen the four screws on the build plate.
- Place a sheet of A4 paper on the LCD screen.
- On the touchscreen, navigate to Tools > Manual > Home. The build plate will descend to the home position.
- Gently press down on the build plate to ensure it is flat against the LCD screen, then tighten the four screws.
- On the touchscreen, navigate to Tools > Set Z=0. This sets the current position as the Z-axis zero point.
- Raise the build plate slightly, remove the A4 paper, and reinstall the resin vat.

Figure 2: The 4-point leveling system for precise calibration.
3.4 Wi-Fi Setup
Connect your printer to a Wi-Fi network for convenient file transfer:
- On the touchscreen, navigate to System > Network.
- Select your desired Wi-Fi network and enter the password.
- Once connected, you can transfer sliced print files wirelessly from your computer.

Figure 3: Wireless file transfer via Wi-Fi connectivity.
4. Operating Instructions
4.1 Preparing a 3D Model for Printing
- Use a compatible slicing software (e.g., Chitubox, VoxelDance Tango) to prepare your 3D model (STL format).
- Configure print settings such as layer height, exposure time, and support structures according to your resin and model requirements.
- Slice the model and save the output file (GOO format) to a USB drive or transfer it via Wi-Fi.

Figure 4: Preparing a 3D model using VoxelDance Tango slicer.
4.2 Starting a Print
- Pour resin into the resin vat, ensuring it does not exceed the MAX fill line.
- Insert the USB drive with your sliced file into the printer's USB port, or ensure the file has been transferred via Wi-Fi.
- On the touchscreen, navigate to Print, select your file, and confirm to start printing.
- The build plate will descend, and the printing process will begin.
Video 1: ELEGOO Mars 4 Ultra Product Overview. This video demonstrates the printer's features and the printing process.
4.3 Post-Printing
- Once printing is complete, carefully remove the build plate.
- Use the provided metal scraper to detach the printed model from the build plate.
- Wash the model in isopropyl alcohol (IPA) to remove uncured resin.
- Cure the model under UV light using a curing station for optimal hardness and strength.

Figure 5: A detailed miniature model printed with the Mars 4 Ultra.
5. Maintenance
5.1 Cleaning the Resin Vat and Build Plate
- After each print, clean the build plate with IPA and a soft cloth.
- If changing resin colors or if there is cured resin in the vat, clean the resin vat thoroughly. Use a plastic scraper to gently remove any cured resin from the FEP film.
- Ensure the LCD screen is clean and free of resin spills. Use a soft cloth and IPA for cleaning.
5.2 Air Purifier Maintenance
The plug-in air purifier contains an activated carbon filter that should be replaced periodically to maintain effective odor filtration. Refer to the air purifier's specific instructions for replacement frequency.

Figure 6: The integrated air purifier helps maintain a clean printing environment.
5.3 Component Replacement
Periodically inspect components like the FEP film, LCD screen, and Z-axis for wear and tear. Replace them as needed to ensure optimal print quality.
Video 2: ELEGOO Mars 4 Ultra DC Port Replacement. This video provides a step-by-step guide on how to replace the DC port.
Video 3: ELEGOO Mars 4 Ultra Limit Switch Replacement. This video provides a step-by-step guide on how to replace the limit switch.
6. Troubleshooting
6.1 Common Printing Issues
- Model not sticking to build plate: Ensure the build plate is properly leveled. Increase bottom exposure time in slicing software. Check if the build plate surface is clean and free of grease.
- Print failures (partial prints, detached layers): Verify exposure settings for your specific resin. Ensure the resin is well-mixed and at an appropriate temperature. Check for damage to the FEP film.
- Layer lines visible: Reduce layer height or adjust anti-aliasing settings in your slicing software. Ensure the Z-axis is stable and free of wobble.
6.2 Printer Malfunctions
- Printer not powering on: Check power cable connections. Ensure the power adapter is functioning correctly.
- LCD screen not displaying: Perform an LCD screen exposure test via the touchscreen menu (Tools > Screen Exposure) to check if the screen lights up. If not, the screen may need replacement.
- Z-axis not moving: Check the motor cable connection. Ensure the limit switch is correctly installed and functioning.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | ELEGOO |
| Model | Mars 4 Ultra |
| Printing Technology | MSLA |
| LCD Screen | 7-inch 9K Mono LCD |
| XY Resolution | 18 µm (8520 x 4320) |
| Build Volume (LWH) | 153.36 x 77.76 x 165 mm³ |
| Operating System | Linux |
| Connectivity | USB, Wi-Fi (2.4G/5G) |
| Supported File Format | STL |
| Power Consumption | 72 Watt |
| Material | Metal |
| Item Weight | 8.3 Kilograms |
| Product Dimensions | 60.5D x 27W x 28.5H centimeters |
8. Warranty and Support
The ELEGOO Mars 4 Ultra comes with a manufacturer's warranty of 1 year. For technical support, troubleshooting assistance, or warranty claims, please contact ELEGOO customer service directly.
You can find additional resources and contact information on the official ELEGOO brand store: ELEGOO Brand Store.