1. Safety Information
Please read all safety instructions carefully before using the VGR V-982 hair clipper. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Water Exposure: Always keep the trimmer away from water sources. Do not use the trimmer near bathtubs, showers, basins, or other vessels containing water. If the appliance falls into water, unplug it immediately. Do not reach into the water.
- Children: Do not use the trimmer on infants or children without adult supervision. Store the trimmer out of reach of children and pets.
- Unplug When Not In Use: Always unplug the trimmer when not in use, before cleaning, and before performing any maintenance.
- Maintenance: Always keep the trimmer clean and follow the recommended maintenance procedures outlined in this manual.
- Sensitive Areas: Be cautious when using the trimmer near the eyes and other sensitive areas of the body.
- Power Cord: Do not use the appliance if the cord or plug is damaged. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, contact customer service.
2. Product Overview
The VGR V-982 is a professional cordless hair clipper designed for efficient hair and beard trimming. It features a digital display, a powerful motor, and self-sharpening stainless-steel blades.
2.1 Package Contents
The package includes the VGR V-982 hair clipper, multiple guide combs, a USB charging cable, a cleaning brush, and lubricating oil.
Image 1: VGR V-982 Hair Clipper with 1mm, 2mm, 3mm, 4mm guide combs, USB charging cable, cleaning brush, and lubricating oil.
2.2 Key Features
- Cordless/Corded Operation: Can be used wirelessly for up to 120 minutes after a 2-hour charge, or directly connected to power.
- Precise & Sharp Blades: Self-sharpening stainless-steel blades with R-shaped design for smooth cutting.
- Powerful Motor: 5W heavy-duty motor with 3500rpm for efficient cutting of various hair types.
- Quiet Operation: Noise level below 60 dB for a comfortable grooming experience.
- LED Digital Display: Shows remaining battery charge and indicates charging status.
- Adjustable Cutting Lengths: Includes 4 attachment guide combs (1mm, 2mm, 3mm, 4mm).
Image 2: Side view of the VGR V-982 highlighting the ON/OFF switch, USB charging port, long work time, and LED display.
Image 3: Close-up of the VGR V-982's guide combs (1mm, 2mm, 3mm, 4mm) and the precision T-blade.
3. Setup
3.1 Initial Charging
Before first use, fully charge the hair clipper. Connect the USB charging cable to the clipper and a suitable USB power source (e.g., laptop, power adapter, power bank). The LED display will show the charging status. A full charge takes approximately 2 hours and provides up to 120 minutes of cordless operation.
Image 4: Various charging methods for the VGR V-982, including laptop, power cord, USB, car charger, and power bank.
3.2 Attaching Guide Combs
To adjust the cutting length, select the desired guide comb (1mm, 2mm, 3mm, or 4mm). Align the comb with the clipper blade and push it firmly until it clicks into place. Ensure the comb is securely attached before use.
- To attach: Slide the comb onto the blade until it locks.
- To remove: Gently pull the comb away from the blade.
4. Operating
4.1 Powering On/Off
Press the ON/OFF switch located on the side of the clipper to turn the device on or off. The LED display will illuminate when the clipper is on.
4.2 Hair Trimming
- Ensure hair is clean and dry for best results.
- Attach the desired guide comb for your preferred cutting length.
- Turn on the clipper.
- Hold the clipper with the blade flat against the hair.
- Move the clipper slowly against the direction of hair growth.
- For blending or tapering, use different comb lengths or remove the comb for a closer trim (exercise caution).
4.3 Beard Trimming
- Ensure your beard is clean and dry.
- Select a guide comb appropriate for your desired beard length.
- Trim in the direction of hair growth for a more even cut, or against for a closer trim.
- Use the clipper without a comb for precise edging and detailing around the neckline and cheekbones. Caution: If trimming near pimples or sensitive skin, proceed with extreme care.
5. Maintenance
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your VGR V-982 hair clipper.
5.1 Cleaning the Blades
- Turn off the clipper and unplug it from any power source.
- Remove the guide comb.
- Use the provided cleaning brush to remove loose hairs from the blades and the clipper body.
- For a more thorough clean, the blade assembly can be carefully detached (refer to specific instructions if provided in a separate quick start guide).
5.2 Oiling the Blades
After every few uses, or if the blades feel sluggish, apply a small drop of the provided lubricating oil to the blades. Turn on the clipper for a few seconds to allow the oil to distribute evenly.
5.3 Storage
Store the clipper in a cool, dry place, away from direct sunlight and moisture. Ensure the clipper is turned off and any guide combs are removed or securely attached.
6. Troubleshooting
If you encounter issues with your VGR V-982 hair clipper, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Low battery; Not charged; Faulty switch. | Charge the clipper fully. Ensure the ON/OFF switch is pressed correctly. If issues persist, contact customer service. |
| Blades pull hair or cut poorly. | Blades are dull; Blades are dirty; Blades need oiling. | Clean the blades thoroughly. Apply lubricating oil to the blades. If blades are dull, they may need replacement (contact customer service). |
| Clipper makes unusual noise. | Blades are not aligned; Internal issue. | Ensure blades are clean and oiled. If noise persists, discontinue use and contact customer service. |
| Battery runtime is shorter than expected. | Battery not fully charged; Battery degradation over time. | Ensure the clipper is charged for the full 2 hours. Battery capacity may decrease over extended use. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | V-982 |
| Power Source | Battery Powered (Cordless/Corded) |
| Battery Type | Lithium Ion (600mAh) |
| Charging Time | Approx. 2 hours |
| Runtime | Up to 120 minutes |
| Motor Power | 5W, 3500rpm |
| Blade Material | Stainless Steel |
| Guide Combs | 1mm, 2mm, 3mm, 4mm |
| Product Dimensions | 18.4 x 8.2 x 5.5 cm |
| Item Weight | 310 Grams |
| Manufacturer | Ningbo VGR Electric Appliance Co., Ltd., Yiwu Gemei Electric Appliance Co. Ltd |
8. Warranty and Support
The VGR V-982 Digital Display Professional Cordless Hair Clipper comes with a 12-month quality warranty from the date of purchase.
If you experience any issues with this product or are not satisfied, please contact VGR customer service without hesitation. Our customer service team aims to respond within 24 hours and provide a satisfactory resolution.
For support, please refer to the contact information provided with your purchase or visit the official VGR website.
