apline Basic Model Car Roof Rack Cross Bar Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your apline Basic Model Car Roof Rack Cross Bar system. Designed for the SsangYong Korando 4 (C300) models from 2019 to 2025, this roof rack system allows for the secure transport of various equipment on your vehicle's roof.

The apline Basic Model Roof Rack is engineered for durability and aesthetics, featuring an anodised surface coating. It is crucial to read and understand all instructions before proceeding with installation and use to ensure safety and proper functionality.

Image: Overview of the three grey aluminium roof rack cross bars.

Compatibility

This roof rack system is specifically designed for SsangYong Korando 4 (C300) vehicles manufactured between 2019 and 2025. It is compatible only with vehicles that have existing roof rails with a gap between the vehicle roof and the roof rail. This product cannot be used on vehicles without roof rails or with flush-mounted roof rails.

Image: Visual guide illustrating the correct type of roof rail for compatibility (roof rails with a gap).

Image: SsangYong Korando (C300) model, highlighting the compatible vehicle type.

Package Contents

Please verify that all components listed below are present in your package before beginning installation:

• 3 pieces of aluminium bar (fully compatible with the vehicle in the title of the listing)
• 6 pieces of aluminium bar connection kit
• 6 pieces Profile Cover
• 6 pieces Bottom Bracket
• 6 pieces Elastomer Bottom Bracket Protector
• 6 pieces Bolt (+ or ⬡)
• 6 pieces Nut
• 1 piece Allen Key (if the bolt is ⬡ head)

Image: All included components of the roof rack system.

Setup and Installation

The assembly process for the apline Basic Model Roof Rack is designed to be straightforward and can be performed by a single person without professional assistance. Detailed instructions are provided within the product package. Below are general steps and visual aids for installation:

Key Features for Installation:

• The Basic Model Roof Rack Profile features a channel opening on the back side.
• The lower bracket has an extension allowance, providing flexibility for users.
• These features allow the length of the profile to be shortened or lengthened as desired, ensuring optimal fit and harmony during assembly.

Image: Illustration of the adjustable profile length and bottom bracket mechanism.

Installation Steps:

1. Prepare Components: Lay out all components and ensure you have the necessary tools (Allen key provided).
2. Attach Bottom Brackets: Secure the bottom brackets to the aluminium bars. Ensure the elastomer protectors are in place to prevent scratching the vehicle's roof rails.
3. Adjust Length: Utilize the extension allowance in the bottom bracket to adjust the length of the aluminium bars to fit your vehicle's roof rails precisely.
4. Position on Roof Rails: Carefully place the assembled cross bars onto your vehicle's roof rails, ensuring even spacing and alignment.
5. Secure to Roof Rails: Tighten the bolts to firmly secure the cross bars to the roof rails. Ensure all connections are snug but do not overtighten.
6. Install Profile Covers: Once secured, attach the profile covers to the ends of the aluminium bars for a finished look and added protection.

Image: Installation steps (Part 1).

Image: Installation steps (Part 2).

Operating and Usage Guidelines

The apline Basic Model Roof Rack is designed to facilitate the transport of various equipment on your vehicle's roof. It is essential to adhere to the following guidelines for safe and effective use:

• This product is necessary for mounting equipment such as bicycle carriers, ski carriers, and roof boxes to your vehicle.
• Always distribute the load evenly across the cross bars.
• Ensure all mounted equipment is securely fastened before driving.

Load Capacity:

• Maximum Load Limit (Moving Vehicle): The maximum load carrying limit with this product in a moving vehicle is 75 kg (165 lbs). This limit applies regardless of whether you use 2 or 3 aluminium bars, as it is a legal and safety standard.
• Maximum Load Limit (Parked Vehicle):
  • For a product consisting of 2 aluminium bars (not applicable to this 3-bar model), a maximum load of 150 kg (330 lbs) is recommended when parked.
  • For the product consisting of 3 aluminium bars (this model), a maximum load of 225 kg (496 lbs) is recommended when parked.
• Caution: Higher weights than recommended may damage the vehicle or the product.

Image: Load capacity guidelines for moving and parked vehicles.

Maintenance

To ensure the longevity and continued safe operation of your apline roof rack, regular maintenance is recommended:

• Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Vibrations during driving can loosen fasteners over time.
• Cleaning: Clean the aluminium bars and plastic components with mild soap and water. Avoid abrasive cleaners or solvents that could damage the anodised finish.
• Storage: If removing the roof rack for extended periods, store it in a dry place away from direct sunlight to prevent material degradation.

Troubleshooting

If you encounter any issues with your apline roof rack, consider the following common solutions:

• Loose Fit/Rattling: Re-check all bolts and nuts, ensuring they are tightened securely according to the installation instructions.
• Difficulty Installing: Verify that your vehicle's roof rails match the compatible type (with a gap between the roof and rail). Refer to the compatibility section and images. Ensure you are using the correct components for each step.
• Excessive Wind Noise: Ensure the bars are installed correctly and are not twisted. Check if any accessories mounted on the bars are causing the noise.

If problems persist, please refer to the support information provided.

Specifications

For technical drawing of the aluminium bar, please refer to the listing images or contact support.

Safety Guidelines

Adhering to these safety guidelines is paramount for your safety and the integrity of your vehicle and equipment:

• Load Limits: Never exceed the specified maximum load limits (75 kg moving, 225 kg parked for 3 bars). Overloading can lead to product failure, vehicle damage, or accidents.
• Secure Fastening: Always ensure all components of the roof rack and any mounted accessories are securely fastened before driving. Check tightness regularly, especially after initial installation and before long trips.
• Weight Distribution: Distribute the load evenly across the cross bars to maintain vehicle stability.
• Vehicle Handling: Be aware that adding a roof rack and cargo can affect your vehicle's handling, braking, and fuel consumption. Adjust your driving style accordingly.
• Clearance: Be mindful of increased vehicle height when entering garages, car washes, or low-clearance areas.
• Regular Checks: Periodically inspect the roof rack for any signs of wear, damage, or corrosion. Replace damaged parts immediately.

Support

For further assistance, technical inquiries, or to confirm compatibility with other products, please visit the manufacturer's support page or contact their customer service.

Manufacturer: apline

Support Link: https://accessorypart.de/001.html

Made in: Türkiye