1. Introduction
This manual provides instructions for the safe and efficient use of your oneisall 2L Stainless Steel Cat Water Fountain. Please read this manual thoroughly before initial use and retain it for future reference. This fountain is designed to provide a continuous supply of fresh, filtered water for cats and small pets.
2. Package Contents
Verify that all items are present in the package:
- 1 x Stainless Steel Water Fountain Unit (2L capacity)
- 1 x Water Pump
- 3 x Replacement Filters
- 3 x Filter Sponges
- 1 x Instruction Manual
3. Safety Instructions
- For indoor use only.
- Do not allow pets to chew on the power cord.
- Always unplug the fountain before cleaning or performing maintenance.
- Ensure the power adapter and cord are kept dry.
- Do not operate the pump dry; ensure water level is above the minimum mark.
- Keep out of reach of children.
4. Setup Guide
Follow these steps to assemble and prepare your cat water fountain:
- Initial Cleaning: Disassemble all components and wash the stainless steel parts with mild soap and water. Rinse thoroughly.
- Filter Preparation: Rinse the new filter and sponge under running water to remove any loose carbon dust.
- Pump Installation: Place the water pump into the designated area at the bottom of the fountain base. Ensure the power cord is routed correctly.
- Filter Placement: Insert the sponge filter into the pump, then place the activated carbon filter into the filter tray.
- Assemble Top Tray: Place the top water tray onto the main stainless steel reservoir. Secure it using the dual-side snap locks to prevent accidental spills.
- Fill with Water: Fill the fountain with clean water up to the 'MAX' line indicated on the water level window. Do not overfill.
- Connect Power: Plug the power adapter into a wall outlet. The pump will begin circulating water.
Image: All components of the fountain are designed for easy disassembly and installation.
Image: The dual-side snap locks ensure the top tray is securely fastened, preventing spills.
5. Operating Instructions
The oneisall cat water fountain provides continuous fresh water for your pet.
- Water Level Monitoring: The fountain features a transparent water level window. Regularly check the water level and refill when it approaches the 'MIN' mark to ensure continuous operation and prevent pump damage.
- Capacity: The 2-liter capacity can provide water for a single cat for approximately 5-7 days, depending on consumption.
- Quiet Operation: The integrated pump operates at less than 30dB, ensuring a quiet environment for your pet and household.
Image: The water level window allows for easy monitoring of the remaining water.
Image: The 2L capacity provides ample water, reducing the frequency of refills.
Image: The fountain operates quietly, ensuring a comfortable environment for pets.
6. Maintenance
Regular cleaning and filter replacement are crucial for maintaining water quality and fountain longevity.
- Fountain Cleaning: Clean the entire fountain unit every 1-2 weeks. All parts are detachable and the stainless steel components are dishwasher safe.
- Water Pump Cleaning: Clean the water pump once a week. Disassemble the pump and remove any hair or debris that may have accumulated.
- Filter Replacement: Replace the activated carbon filter and sponge every 1-2 weeks, or more frequently if multiple pets use the fountain or if water appears dirty.
- Water Change: Change the water in the fountain at least once a week.
Image: The fountain's design allows for quick and easy cleaning of all components.
Image: Stainless steel components are dishwasher safe for convenient cleaning.
Image: The 3-stage filtration system includes a sponge, activated carbon, and ion-exchange resin for pure water.
7. Troubleshooting
If you encounter issues with your fountain, refer to the following common solutions:
- No Water Flow: Check if the pump is properly installed and connected. Ensure the power adapter is plugged in and receiving power. Verify the water level is above the minimum mark.
- Weak Water Flow: The pump or filter may be clogged with debris or hair. Clean the pump and replace the filter if necessary. Ensure the water level is adequate.
- Excessive Noise: If the pump is noisy, it often indicates a low water level. Refill the fountain to the 'MAX' line. Also, ensure the pump is clean and free of obstructions.
- Water Spills: Ensure the top tray is securely fastened with the snap locks. Check for any cracks or damage to the fountain components.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | PWF-001-Pro |
| Capacity | 2 Liters |
| Material | 304 Stainless Steel |
| Product Dimensions (LxWxH) | 7.8" x 7.8" x 6.1" (19.8cm x 19.8cm x 15.5cm) |
| Item Weight | 1.52 pounds (0.69 kg) |
| Included Components | Fountain unit, pump, 3 replacement filters, 3 sponges |
| Manufacturer | oneisall |
Image: Key dimensions and specifications of the fountain.
9. Warranty and Support
Your oneisall 2L Stainless Steel Cat Water Fountain is covered by a 2-Year Manufacturer Warranty.
For warranty claims, technical support, or any questions regarding your product, please contact oneisall customer service. Refer to the product packaging or the official oneisall website for the most current contact information.
