Introduction
This manual provides instructions for the PERFASCIN RG36F-BGEF replacement remote control, designed for use with various Midea Air Conditioner models. Please read this manual carefully before using the remote control to ensure proper operation and to maximize its lifespan.
Image: Front view of the PERFASCIN RG36F-BGEF Replacement Remote Control, showing the display screen and various control buttons.
Compatible Models
The RG36F-BGEF remote control is compatible with a wide range of Midea Air Conditioner models, including but not limited to:
- RG36A/BGE, RG36A/BGEF, RG36A/BGEF-AR3, RG36A/BGEF-EC, RG36A/BGER
- RG36A1/BGCEF, RG36A1/BGEF, RG36A12/BGEF, RG36A2/BGCEF, RG36A2/BGEF
- RG36B(B)/BGE, RG36B/BGCE, RG36B/BGE, RG36B/BGEF, RG36B1/BGCE, RG36B1/BGE, RG36B2/BGEF, RG36B4/BGE, RG36B4(B)/BGE
- RG36C/BGCE, RG36C/BGE, RG36C/BGEF
- RG36D/BGCE, RG36D/BGE, RG36D/BGEF
- RG36E/BGE
- RG36F/BGCEF, RG36F/BGEF, RG36F1/BGEFU1, RG36F2/BGEF, RG36F3/BGCEF, RG36F3/BGEF, RG36F4/BGCEF, RG36F4/BGEF
- RG36Y1/BGCEFU2
This remote control is designed to function as a direct replacement for the original remote controls of these models.
Setup
Battery Installation
The remote control requires two (2) AAA Alkaline batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the battery compartment.
- Insert two AAA Alkaline batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Rear view of the remote control with the battery cover removed, showing the battery slots and proper orientation for AAA batteries.
Important:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage and damage.
Operating Instructions
Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.
Button Functions
| Button | Function |
|---|---|
| ON/OFF | Powers the air conditioner on or off. |
| TEMP +/- | Adjusts the temperature setting. The display shows temperature in both Fahrenheit and Celsius. |
| MODE | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| SWING (Up/Down) | Controls the vertical louver swing direction. |
| SWING (Left/Right) | Controls the horizontal louver swing direction. |
| SILENCE / FP | Activates Silence mode for quiet operation or the Freeze Protection (FP) function. |
| FAN SPEED | Adjusts the fan speed (e.g., Auto, Low, Medium, High). |
| TIMER ON/OFF | Sets the timer for automatic power on or off. |
| SLEEP / FRESH | Activates Sleep mode for comfortable night operation or the Fresh air function. |
| INTELLIGENT EYE | Activates the Intelligent Eye sensor, if available on your AC unit, to detect human presence and optimize operation. |
| LED / FOLLOW ME | Controls the display LED on the AC unit or activates the Follow Me function, which senses temperature at the remote's location. |
| TURBO / SELF CLEAN | Activates Turbo mode for rapid cooling/heating or initiates the Self Clean function. |
| LOCK / RESET | Locks the remote control settings or resets the remote to default settings. |
Note: Not all functions may be available on every Midea Air Conditioner model. Refer to your air conditioner's manual for specific feature availability.
Maintenance
Cleaning the Remote Control
To maintain the remote control's appearance and functionality:
- Wipe the surface with a soft, dry cloth.
- Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these may damage the remote control.
Battery Care
If the remote control will not be used for an extended period (e.g., more than one month), remove the batteries to prevent potential leakage and corrosion. Store the remote control in a cool, dry place.
Troubleshooting
If you experience issues with your remote control, please refer to the following common solutions:
- Remote not responding:
- Check if the batteries are correctly installed with the proper polarity.
- Replace the batteries with new AAA Alkaline batteries.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Confirm the remote control is pointed directly at the air conditioner.
- Display is dim or blank:
- This usually indicates low battery power. Replace both AAA Alkaline batteries.
- Air conditioner not responding to specific functions:
- Some advanced functions may not be supported by all Midea Air Conditioner models. Refer to your air conditioner's original manual.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RG36F-BGEF |
| Brand | PERFASCIN |
| Compatible Devices | Midea Air Conditioners (various models) |
| Power Source | 2 x AAA Alkaline Batteries (not included) |
| Rated Voltage | 3V DC |
| Product Dimensions | 6 x 3 x 0.5 inches (approximately) |
| Item Weight | 2 ounces (without batteries) |
| Special Features | Fahrenheit and Celsius display, Green Backlight |
Image: Back view of the remote control, displaying the model number RG36F/BGEF and rated voltage 3V DC.
Support
For any questions or further assistance regarding the PERFASCIN RG36F-BGEF replacement remote control, please contact our customer support. We are committed to providing the best possible service.
Contact information is typically provided by the seller or manufacturer at the point of purchase.