OUKANING Industrial Floor Lamp User Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Always disconnect the lamp from the power source before cleaning, changing the bulb, or performing any maintenance.
• Ensure the lamp is securely supported and stable on a flat surface to prevent tipping.
• Do not use bulbs exceeding the maximum wattage specified in the specifications section.
• Keep the power cord away from heat sources, sharp edges, and wet areas.
• This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• If any part of the lamp is damaged, discontinue use immediately and contact customer support.

2. Package Contents

Verify that all components are present before beginning assembly:

• 1 x OUKANING Industrial Floor Lamp (Bulb Not Included)
• 1 x Power Cable
• 1 x Lamp Shade
• 1 x Set of Screws and Assembly Hardware
• 1 x Instruction Manual

Image: Detailed view of lamp components, showing the storage drawer, glass desktop, high-quality iron shade, and the marble material used in the base structure.

3. Setup and Assembly

Follow these steps to assemble your OUKANING Industrial Floor Lamp:

1. Unpack all components and place them on a clean, flat surface.
2. Carefully connect the lamp poles by screwing them together. Ensure the internal wiring is not pinched during this process.
3. Attach the base to the assembled pole structure using the provided screws and hardware. Tighten securely to ensure stability.
4. Mount the lamp shade onto the designated fixture at the top of the lamp arm.
5. Insert an E26 base bulb (not included) into the lamp socket. Do not exceed the maximum wattage of 60W.
6. Place the lamp in your desired location, ensuring it is stable and the power cord is not a tripping hazard.

4. Operating Instructions

Your OUKANING Industrial Floor Lamp is designed for simple operation:

• Power On/Off: The lamp is equipped with a convenient foot pedal switch located on the power cord. Press the pedal once to turn the lamp on, and press it again to turn it off.
• Adjustable Pulley Design: The lamp features an adjustable pulley system. To modify the height or position of the lampshade, gently hold the string and move the lampshade up or down along the boom. Release the string to secure the lampshade in the desired position.

Image: A visual comparison of the lamp in its 'off' state (left) and 'on' state (right), illustrating the illumination provided when active.

5. Maintenance

To ensure the longevity and optimal performance of your lamp:

• Cleaning: Disconnect from power. Wipe the lamp and shade with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Bulb Replacement: Disconnect from power. Allow the old bulb to cool completely before unscrewing it. Insert a new E26 base bulb, ensuring it is securely tightened.
• Cord Care: Regularly inspect the power cord for any signs of damage. If the cord is damaged, it must be replaced by a qualified professional to avoid hazards.

6. Troubleshooting

If you encounter issues with your OUKANING Industrial Floor Lamp, refer to the following common problems and solutions:

• Lamp does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the bulb is properly installed and not burnt out. Replace if necessary.
  • Verify that the foot pedal switch is fully pressed.
• Light flickers:
  • Tighten the bulb in its socket.
  • Try a different bulb to rule out a faulty bulb.
  • Ensure the electrical connection is stable.
• Lamp is unstable:
  • Check all screw connections, especially at the base, and tighten them if loose.
  • Ensure the lamp is placed on a flat, level surface.

If these steps do not resolve the issue, please contact OUKANING customer support for further assistance.

7. Specifications

Image: A diagram illustrating the key dimensions of the floor lamp, including overall height, shade diameter, and base measurements.

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official OUKANING website.