1. Introduction
Thank you for choosing the Magichome Filter Shower Head. This manual provides essential information for the proper installation, operation, and maintenance of your new shower head. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
2. Product Overview
Key Features:
- Advanced Filtration System: Utilizes three different types of mineral stones to effectively remove chlorine, fluoride, heavy metals, bacteria, rust, and odors from shower water, improving water quality and maintaining pH balance.
- Anti-Clog Silicone Nozzles: Equipped with anti-limescale silicone nozzles that prevent mineral buildup and are easy to clean, ensuring consistent water flow.
- 5 Spray Modes: Offers five distinct spray patterns to cater to various showering preferences, providing a versatile and comfortable experience.
- High-Pressure Design: Incorporates air pressure technology to boost water pressure, delivering a dense and powerful water stream for a full-range showering experience, ideal for areas with low water pressure.
- Durable Construction: Features upgraded plating for anti-corrosion properties and a thickened handle for enhanced durability and drop resistance.
Components Included:
The package typically includes:
- Magichome Filter Shower Head
- 2-meter (79-inch) Shower Hose (if purchased as a set)
- Extra Mineral Stones (replacement beads)
- Sealing Rings / Washers
- Instruction Manual
- PTFE Tape (Teflon tape)
3. Setup and Installation
Installation of the Magichome Filter Shower Head is straightforward and typically does not require special tools.
- Preparation: Ensure your water supply is turned off at the main valve or the shower valve. Remove your old shower head and clean any residue from the shower arm thread.
- Apply PTFE Tape: Wrap PTFE tape (Teflon tape) clockwise around the threads of your shower arm. This helps create a watertight seal and prevents leaks.
- Attach Hose (if applicable): If installing a new hose, attach one end of the 2-meter stainless steel hose to the shower arm. Ensure a rubber washer is inside the hose connector before tightening by hand. Do not overtighten.
- Connect Shower Head: Attach the Magichome Filter Shower Head to the other end of the hose (or directly to the shower arm if not using a hose). Ensure a rubber washer is properly seated inside the shower head connector. Tighten by hand until snug.
- Check for Leaks: Turn on the water supply slowly and check for any leaks at the connections. If leaks occur, tighten slightly more or reapply PTFE tape.
Image: Durable brass connection points on the shower hose.
4. Operating Instructions
Your Magichome Filter Shower Head features 5 distinct spray modes, easily adjustable with a one-hand switch for a fine water flow and comfortable experience.
Adjusting Spray Modes:
To change the spray mode, simply rotate the dial on the shower head. Each click corresponds to a different spray pattern:
- Mode 1: Rain Spray - A gentle, wide coverage spray, ideal for a relaxing shower.
- Mode 2: Massage Spray - A focused, pulsating spray for muscle relaxation.
- Mode 3: Mist Spray - A fine, soft mist, perfect for sensitive skin or rinsing.
- Mode 4: Power Spray - A strong, concentrated stream for rinsing soap quickly or cleaning.
- Mode 5: Mixed Spray - A combination of modes for a unique showering sensation.
Image: Adjusting the 5 spray modes.
5. Maintenance
Regular maintenance ensures the optimal performance and longevity of your Magichome Filter Shower Head.
Filter Bead Replacement:
The mineral filter beads should be replaced periodically to maintain effective water filtration. Depending on your local water quality, it is recommended to replace the filter beads every 3 months.
- Unscrew the handle of the shower head.
- Carefully remove the old mineral beads.
- Rinse the handle and internal components with clean water.
- Insert the new set of mineral beads into the handle, ensuring they are properly layered if applicable.
- Screw the handle back onto the shower head securely.
Cleaning the Nozzles:
The anti-limescale silicone nozzles are designed for easy cleaning. If you notice reduced water flow or uneven spray patterns due to mineral buildup:
- Simply rub your finger or a soft cloth over the silicone nozzles to dislodge any limescale or debris.
- For more stubborn buildup, you can use a soft brush and a mild descaling solution (e.g., white vinegar diluted with water).
- Rinse thoroughly after cleaning.
Image: Self-cleaning silicone outlets.
6. Troubleshooting
If you encounter any issues with your Magichome Filter Shower Head, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles; Mineral buildup in filter; Insufficient water supply. | Clean the silicone nozzles (see Maintenance); Replace filter beads (see Maintenance); Check household water pressure. |
| Leaking Connections | Loose connection; Missing or worn washer; Insufficient PTFE tape. | Ensure connections are hand-tight; Check that rubber washers are properly seated; Reapply PTFE tape to threads. |
| Water Tastes/Smells Unusual | Filter beads need replacement. | Replace the filter beads (see Maintenance). |
| Difficulty Switching Modes | Mineral buildup in the selector mechanism. | Rinse the shower head thoroughly. If persistent, soak the head in a descaling solution. |
If the problem persists after trying these solutions, please contact Magichome customer support for further assistance.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | Magichome |
| Model Number | M-S-R6 |
| Product Dimensions | 25 x 12 x 12.7 cm |
| Weight | 300 Grams |
| Color | White (with hose) |
| Material | Metal, Silicone |
| Finish Type | Chrome |
| Hose Length | 200 Centimeters (2 meters) |
| Installation Method | Wall Mount |
| Number of Spray Modes | 5 |
| Filter Type | 3-layer mineral stone filter |
8. Warranty and Support
Magichome products are designed for quality and durability. For specific warranty information, please refer to the product packaging or contact your retailer. In general, products purchased on Amazon.nl are subject to a 30-day return policy.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact Magichome customer support through the retailer's platform or visit the official Magichome website for contact details.
Please have your model number (M-S-R6) and purchase information ready when contacting support.
