Introduction
Thank you for choosing btfarm Solar String Lights. This manual provides essential information for the proper setup, operation, and maintenance of your solar-powered lighting system. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Product Overview
The btfarm SL24 Solar String Lights are designed for outdoor decorative lighting. Each pack includes 80 LED lights on a 33-foot string (26.5 ft light string + 6.5 ft lead wire), totaling 320 LEDs across 132 feet for a 4-pack. The lights feature a copper wire construction and are powered by an integrated solar panel.
Key Features:
- Solar Powered: Charges during the day and illuminates automatically at night.
- Waterproof Design: IP65 rated for resistance to rain, sun, and snow.
- Multiple Lighting Modes: 8 distinct lighting modes for varied decorative effects.
- Memory Function: Retains the last selected lighting mode.
- Durable Construction: Features a copper wire string for flexibility and longevity.
Setup
Follow these steps to set up your btfarm Solar String Lights:
- Assemble the Stake: Connect the ground stake sections together and then attach the solar panel unit to the top of the stake.
- Position the Solar Panel: Choose a location that receives direct sunlight for 6-8 hours daily. Orient the solar panel to face North or South for maximum sun exposure throughout the day. The panel can be adjusted to an optimal angle.
- Initial Charge: Before first use, ensure the solar panel is charged in direct sunlight for at least 8 hours. This will maximize battery life and performance.
- Unravel the Lights: Carefully uncoil the copper wire string lights. The wire is delicate; avoid excessive pulling or sharp bends to prevent damage.
- Install the Lights: Drape or wrap the string lights in your desired location, such as around trees, bushes, fences, or patio areas.
- Activate: Locate the ON/OFF button on the back of the solar panel and press it to turn the lights on. The lights will automatically illuminate at dusk.
Operating Instructions
Your btfarm Solar String Lights are designed for simple operation:
- Power On/Off: Press the 'ON/OFF' button located on the back of the solar panel to activate or deactivate the lights.
- Automatic Illumination: Once powered on, the lights will automatically turn on at dusk and turn off at dawn, provided the solar panel receives sufficient sunlight during the day.
- Change Modes: Use the 'MODE' button on the back of the solar panel to cycle through the 8 different lighting effects.
- Memory Function: The built-in memory function will save your last selected lighting mode. You will not need to reset it daily unless the unit is manually turned off.
Lighting Modes
The btfarm SL24 Solar String Lights offer 8 distinct lighting modes:
- Combination
- In Waves
- Sequential
- Slow Glow
- Chasing/Flash
- Slow Fade
- Twinkle/Flash
- Steady On
Maintenance
To ensure the longevity and optimal performance of your solar string lights, consider the following maintenance tips:
- Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight absorption. A clean panel ensures efficient charging.
- Check for Obstructions: Ensure the solar panel is not shaded by trees, buildings, or other objects throughout the day. Any obstruction will reduce charging efficiency.
- Inspect Wiring: Periodically check the copper wire for any signs of damage or breakage, especially after strong winds or heavy rain. Handle the delicate copper wire carefully during installation and adjustments.
- Winter Care: While the lights are waterproof, extreme cold or heavy snow can impact battery performance. Consider storing them indoors during prolonged periods of harsh winter weather to extend battery life.
Troubleshooting
If you encounter issues with your solar string lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on at night. | Insufficient solar panel charge. | Ensure the solar panel is placed in direct sunlight for 6-8 hours daily. Clean the panel if dirty. |
| Lights are dim or turn off quickly. | Inadequate charging or old battery. | Relocate the solar panel to a sunnier spot. Ensure initial 8-hour charge. Battery may need replacement after extended use. |
| Lights are not working in a specific section. | Damaged copper wire or LED. | Carefully inspect the wire for breaks or kinks. Due to the delicate nature of the copper wire, individual LED repair is not typically feasible. |
| Lights remain on during the day. | Solar panel sensor is obstructed or faulty. | Ensure the solar panel is not covered or in a shaded area. If the issue persists, the sensor may be faulty. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SL24 |
| Color | Warm White |
| Total LED Count (4-pack) | 320 LEDs |
| Total Length (4-pack) | 132 Feet |
| Single String Length | 33 Feet (26.5 ft light string + 6.5 ft lead wire) |
| Power Source | Solar Powered |
| Light Source Type | LED |
| Waterproof Rating | IP65 |
| Material | Copper Wire, Plastic |
| Charging Time | 6-8 hours in direct sunlight |
| Working Time | 10-14 hours after full charge |
| Control Method | Push Button (On/Off, Mode) |
| Included Components | Batteries included (within solar panel unit) |
Warranty and Support
btfarm is committed to providing quality products. Your purchase includes:
- 365 Days Quality Assurance: For any manufacturing defects or performance issues within one year of purchase.
- 24/7 Online Service: Customer support is available around the clock for assistance.
- 30 Days Free Return & Exchange: If you are not satisfied with your product, you may return or exchange it within 30 days of purchase.
For further assistance or inquiries, please contact btfarm customer service.
