homekicen Brushed Gold Antique Shower System with Tub Spout Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your new homekicen Brushed Gold Antique Shower System with Tub Spout. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.

2. Product Components

The homekicen Brushed Gold Antique Shower System includes the following components:

• 9-inch Rain Shower Head
• 16-inch Wall-Mounted Shower Arm with Flange
• Handheld Shower Spray
• Shower Holder
• 59-inch Shower Hose
• 6-inch Tub Spout
• Mixing Valve and Trim Kit (including single lever handle and diverter knob)

Figure 2.1: All components included in the homekicen Brushed Gold Antique Shower System.

3. Safety Information

• Always turn off the main water supply before beginning any installation or maintenance.
• Wear appropriate personal protective equipment, such as safety glasses and gloves.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• Ensure all connections are secure to prevent leaks.
• Do not use harsh chemicals or abrasive cleaners on the product finish.

4. Installation Instructions

This section outlines the general steps for installing the homekicen shower system. Professional installation is recommended.

4.1. Pre-Installation Checks

• Verify that all components listed in Section 2 are present and undamaged.
• Ensure your plumbing system is compatible with U.S. Plumbing Standard 1/2" NPT connections.
• Confirm adequate wall blocking for secure mounting of the valve and shower arm.

4.2. Valve Installation

1. Turn off the main water supply.
2. Mount the mixing valve securely within the wall, ensuring it is level and at the desired height.
3. Connect the hot and cold water inlet lines to the designated ports on the valve.
4. Connect the mixed water outlet lines to the shower head, handheld spray, and tub spout ports.
5. Perform a leak test before closing the wall.

Figure 4.1: Detailed view of the balance valve, showing hot water inlet, cold water inlet, and mixed water outlets for the shower functions. This valve is designed for easy maintenance and installation.

4.3. Shower Arm and Head Installation

1. Thread the 16-inch shower arm into the wall connection, ensuring a watertight seal.
2. Attach the 9-inch rain shower head to the shower arm. Hand-tighten, then use a wrench for a final quarter turn, being careful not to overtighten.

4.4. Handheld Spray and Hose Installation

1. Install the shower holder at a convenient height.
2. Connect the 59-inch shower hose to the handheld spray and the wall outlet.
3. Place the handheld spray into the holder.

4.5. Tub Spout Installation

1. Thread the 6-inch tub spout onto the wall connection, ensuring it is securely fastened and sealed.

4.6. Trim Kit Installation

1. Install the trim plate over the valve body.
2. Attach the single lever handle and the diverter knob according to the manufacturer's instructions, ensuring they operate smoothly.

5. Operation Guide

Your homekicen shower system features a single lever for water temperature and flow control, and a diverter knob to select between the three shower functions.

5.1. Water Flow and Temperature Control

• The single lever handle controls both water flow and temperature.
• Lift the handle to increase water flow.
• Rotate the handle left for hot water and right for cold water.

5.2. Function Selection (3-Way Diverter)

The diverter knob allows you to switch between the rain shower head, handheld spray, and tub spout.

• Rotate the diverter knob to select your desired water outlet.
• The system provides a consistent water flow even at lower water pressures.

Figure 5.1: The complete shower system in operation, showcasing the rain shower head, handheld spray, and tub spout.

Figure 5.2: Close-up of the 9-inch rain shower head, featuring flexible silicone nozzles for easy cleaning.

Figure 5.3: The metal handheld shower spray, connected to a 59-inch long hose, with an adjustable angle holder.

Figure 5.4: The 6-inch tub spout, designed for powerful water flow and equipped with a honeycomb bubbler.

6. Maintenance and Care

Proper care will help maintain the finish and performance of your homekicen shower system.

• Cleaning the Finish: Clean the brushed gold finish regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the multi-layer finish.
• Cleaning Nozzles: The rain shower head features touch-to-clean silicone nozzles. Simply rub the nozzles with your finger to dislodge mineral buildup.
• General Maintenance: Periodically check all connections for tightness and signs of wear.

7. Troubleshooting

This section addresses common issues you might encounter with your shower system.

7.1. Low Water Pressure

• Check Main Water Supply: Ensure the main water valve is fully open.
• Clean Shower Head/Handheld Nozzles: Mineral buildup can restrict flow. Clean the silicone nozzles as described in Section 6.
• Inspect Hoses: Check for kinks or damage in the shower hose.

7.2. Leaks

• Tighten Connections: Ensure all threaded connections are securely tightened. Do not overtighten.
• Check Seals/Washers: Verify that all washers and seals are correctly seated and not damaged. Replace if necessary.

7.3. Temperature Control Issues

• Verify Hot/Cold Supply: Ensure hot and cold water lines are connected correctly to the valve.
• Adjust Temperature Limit Stop: The mixing valve may have an adjustable temperature limit stop. Consult a plumber if adjustment is needed.

7.4. Loose Handles or Knobs

• Check Set Screws: Ensure all set screws for the handle and diverter knob are present and tightened. If missing, contact customer support for replacements.

8. Specifications

9. Warranty and Support

homekicen stands behind the quality of its products.

• Warranty: This shower system is covered by a 5-year protection period. If any part malfunctions due to quality reasons within this period, you will be eligible for a free replacement.
• Customer Service: For any questions, concerns, or to request replacement parts, please contact the seller directly through your order platform. Our customer service team aims to respond within 12 hours.