Introduction
Thank you for choosing the EVERDOSS Under Cabinet Lighting. This wireless, rechargeable motion sensor light is designed to enhance convenience and ambient lighting in various indoor spaces such as kitchens, closets, stairs, and hallways. Featuring advanced motion sensing technology, eye-protective lighting, and a long-lasting rechargeable battery, this product offers a practical and efficient lighting solution.
Image: A set of six EVERDOSS 8-inch warm white under cabinet lights, showcasing their sleek design and compact size.
Safety Information
- Before installation, ensure the surface is clean and free of stains, water, oil, or dust to maintain adhesive strength.
- Use only a 5V USB-C charger when the cabinet light requires charging. Do not use 9V or 12V chargers, as this may damage the device.
- This product is designed for indoor use only and is not water resistant. Avoid exposure to moisture or direct water contact.
- Do not attempt to disassemble or modify the light. Refer all servicing to qualified personnel.
- Keep out of reach of children.
Product Overview
The EVERDOSS Under Cabinet Light features a compact design with integrated components for ease of use and installation.
Key Components:
- LED Light Bar: Contains 32 energy-saving LED beads for bright, eye-protective illumination.
- PIR Motion Sensor: Detects human movement within a 120° range and up to 10 feet.
- OFF-ON-AUTO Switch: Allows selection between Off, Always-On, and Motion Sensor modes.
- USB-C Charging Port: For convenient and fast recharging of the built-in battery.
- Charging Indicator: Light to show charging status.
- Built-in Magnet: For direct attachment to iron surfaces.
- Adhesive Metal Strips: For mounting on non-metallic surfaces.
Image: Detailed view of the light's components, highlighting the charging port, sensor, and mode switch.
Image: Explanation of the fade-in/fade-out lighting technology for eye protection and soft light distribution.
Setup and Installation
The EVERDOSS Under Cabinet Light offers two primary installation methods due to its built-in magnet.
Method 1: Direct Magnetic Attachment (for iron surfaces)
- Ensure the iron surface is clean and dry.
- Simply place the light directly onto the iron surface. The built-in magnet will hold it in place.
Method 2: Adhesive Metal Strips (for non-metallic surfaces)
- Prepare the Surface: Clean the desired installation surface thoroughly. It must be free of dust, water, oil, and any other stains to ensure optimal adhesive strength.
- Attach Metal Strips: Peel off the protective film from one side of the adhesive metal strip. Stick this side firmly onto the desired non-metallic surface (e.g., under a cabinet, inside a closet).
- Mount the Light: The light has a built-in magnet. Simply align the light with the installed metal strip and allow the magnet to secure it.
- Recharging: When the light needs recharging, it can be easily removed from the magnetic strip without detaching the strip from the surface.
Image: Step-by-step guide for installing the light using the included adhesive metal strips.
Image: Visual representation of both magnetic and adhesive installation methods.
Operating Instructions
The EVERDOSS Under Cabinet Light features a versatile switch to select different operating modes:
Image: Illustration of the mode selection switch.
- OFF Mode: Slide the switch to "OFF" to turn the light off completely.
- ON Mode (Always-On): Slide the switch to "ON" to keep the light continuously illuminated. This mode is suitable for situations where constant lighting is desired, regardless of motion or ambient light. The light can be used for approximately 5 to 6 hours in this mode on a full charge.
- AUTO Mode (Motion Sensor): Slide the switch to "AUTO" to activate the motion sensor. In this mode, the light will automatically turn on when human movement is detected within 120° and 10 feet, primarily in dark or poorly lit environments. The light will remain on as long as motion is detected and will turn off approximately 20 seconds after no movement is detected. This mode is ideal for energy saving and convenience in areas like closets, hallways, or stairs.
Image: Visual representation of the motion sensor's detection range and auto-off function.
Image: Examples of how the motion sensor mode functions in different lighting and movement conditions.
Charging Instructions
The EVERDOSS Under Cabinet Light is equipped with a built-in 1500mAh rechargeable battery for wireless operation.
- Initial Charge: It is recommended to fully charge the lights before first use.
- Connect Charger: Locate the USB-C charging port on the side of the light. Connect a 5V USB-C charging cable to the port.
- Power Source: Connect the other end of the USB-C cable to a compatible 5V USB power adapter (not included).
- Charging Indicator: The charging indicator light will illuminate during charging. It will change color or turn off once fully charged.
- Charging Time: A full charge typically takes 1-2 hours.
- Battery Life:
- Always-On Mode: Approximately 5-6 hours of continuous use.
- Motion Sensor Mode: Approximately 7-20 days, depending on usage frequency.
Important: Only use a 5V USB-C charger. Using 9V or 12V chargers can cause irreversible damage to the battery and light.
Image: Visual guide to the charging process and expected battery performance.
Image: Detailed view of the USB-C charging port and charging indicators.
Maintenance
- Cleaning: To clean the light, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the light in water.
- Storage: If storing the lights for an extended period, ensure they are fully charged and store them in a cool, dry place. Recharge them periodically to maintain battery health.
- Adhesive Care: If you need to re-position the adhesive metal strips, ensure the new surface is clean and dry for optimal adhesion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in AUTO mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the light. Clear any obstructions from the sensor. |
| Light turns off too quickly or stays on too long in AUTO mode. | Continuous motion detected; sensor malfunction. | Ensure there is no continuous motion in the sensor's range. If the issue persists, contact customer support. |
| Light does not charge. | Incorrect charger; faulty cable/port; battery issue. | Verify you are using a 5V USB-C charger. Try a different cable or power adapter. If the problem continues, contact customer support. |
| Light falls off the surface. | Surface not clean; adhesive worn out; not an iron surface. | Clean the surface thoroughly before re-applying adhesive metal strips. Replace adhesive strips if necessary. Ensure direct magnetic attachment is only on iron surfaces. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EVERDOSS |
| Model | Under Cabinet Lights |
| Color | Warm White Light |
| Material | Aluminum, Plastic |
| Product Dimensions | 8"L x 1.57"W x 0.35"H |
| Light Source Type | LED (32 LED beads) |
| Brightness | 180 Lumen |
| Color Temperature | 3000 Kelvin |
| Battery | 1500mAh Lithium Ion (included) |
| Charging Port | USB-C |
| Voltage | 5 Volts (DC) |
| Motion Sensor Range | 120° within 10 feet |
| Auto-Off Time | Approx. 20 seconds (after no motion) |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
| Control Method | Touch, Push Button (Switch) |
Warranty and Support
EVERDOSS provides a Limited Warranty for this product. For specific warranty details, please refer to the documentation included with your purchase or contact EVERDOSS customer support.
If you encounter any issues or have questions regarding your EVERDOSS Under Cabinet Lighting, please contact our customer support team. We are committed to providing satisfactory solutions within 24 hours.
- Manufacturer: EVERDOSS Firms
- Contact: Refer to your product packaging or the EVERDOSS official website for the most current contact information.
