Forepin LED Motion Sensor Cabinet Light

Specifications

Using Manual

The Forepin LED Motion Sensor Cabinet Light features a simple operation and setup.

Device Components: The light fixture is a slim, elongated cylinder. At one end, you will find:

• (1) PIR Sensor: This sensor detects motion to activate the light.
• (2) USB Charging Port: Used for recharging the internal battery.
• (3) Switch: A 3-position switch to control the light's operation.
• (4) LED: The light source.

Switch Operation (S2)

The switch (S2) offers three modes:

• ON: The light stays continuously illuminated.
• OFF: The light is completely turned off.
• AUTO: The light operates automatically based on motion detection.

Sensor Mode Functionality (S1)

When the switch is set to AUTO (S1), the light activates automatically upon detecting motion. The detection range is 3 to 5 meters with a 120-degree angle. After approximately 20 seconds of no detected motion, the light will automatically turn off.

Sensor Range Description

Special Instructions for Sensing Mode

• The light activates when motion is detected.
• The light automatically switches off after 20 seconds of inactivity.
• In sensor mode, the light will not activate if the ambient environment is already sufficiently bright.

Cautions

⚠️ Please observe the following precautions:

• 1. Do not disassemble or reassemble the product.
• 2. Do not expose the product to extreme temperatures or humidity.
• 3. Do not use the product in environments containing flammable or explosive gases.