Anker Nano Power Bank (Model A1653) User Manual

Introduction

The Anker Nano Power Bank is a compact and efficient portable charging solution designed for a wide range of USB-C compatible devices. Featuring a built-in foldable USB-C connector and a 5,000mAh battery, it provides convenient and rapid power on the go. This manual provides essential information for the safe and optimal use of your device.

What's in the Box

• Anker Nano Power Bank (22.5W, Built-In USB-C Connector)
• 2 ft / 0.6 m USB-C to USB-C cable
• Welcome Guide
• User Manual

Product Overview

Figure 1: Anker Nano Power Bank in Shell White. This compact device features a built-in foldable USB-C connector for direct charging.

Built-in Foldable USB-C Connector

The power bank features a convenient foldable USB-C connector, eliminating the need for extra cables when charging compatible devices. This connector is designed to keep your charging setup neat and organized.

High-Speed Charging

Equipped with PowerIQ 3.0 technology, the power bank delivers a robust 22.5W output for rapid device charging. It can charge an iPhone 15 to 43% in approximately 30 minutes.

Figure 2: The Anker Nano Power Bank connected to an iPhone 15, highlighting its 22.5W Max high-speed charging capability. Note: Supports up to 22.5W fast charging.

Compact and Portable Design

With dimensions of 3.03 x 1.45 x 0.98 inches and a weight of 3.5 ounces, the power bank is designed for sleek portability, fitting easily into pockets or purses.

Figure 3: A hand placing the Anker Nano Power Bank into a pocket, demonstrating its stylish and practical compact design for easy carrying.

Eco-Friendly Design

The exterior casing of the power bank incorporates 73% post-consumer recycled plastic, contributing to approximately 71% of the entire product's composition. This design reduces carbon emissions by 50% (assessed under ISO 14040 / ISO 14044 standards).

Figure 4: An image highlighting the eco-friendly design of the Anker Nano Power Bank, noting its use of 73% post-consumer recycled plastic.

Setup

Charging the Power Bank

To charge your Anker Nano Power Bank, connect it to a power source using the included 2 ft / 0.6 m USB-C to USB-C cable. The power bank supports up to 20W input for efficient recharging.

Checking Battery Level

Press the power button on the side of the power bank to view the current battery percentage on the integrated display.

Operating Instructions

Charging Devices with Built-in USB-C Connector

Extend the foldable USB-C connector and plug it directly into your compatible device (e.g., iPhone 15 series, Samsung S22/23 series, iPad Pro/Air). The power bank will automatically begin charging.

Charging Devices with External Cable

For devices not compatible with the built-in USB-C connector or for simultaneous charging, use the additional USB-C port on the side of the power bank with an appropriate cable (e.g., USB-C to Lightning cable for older iPhones, sold separately).

Figure 5: Compatibility chart for the Anker Nano Power Bank, showing devices compatible with the built-in USB-C connector and the external USB-C port (with optional Lightning cable).

Trickle Charging Mode

For low-power devices such as headphones or smartwatches, activate trickle charging mode by double-pressing the power button. This mode provides a slower, optimized charge to prevent overcharging and extend battery life for smaller devices.

Compatibility

The Anker Nano Power Bank is compatible with a wide range of devices, including:

• iPhone 15 Series
• Samsung S22/S23 Series
• iPad Pro/Air
• AirPods
• Other USB-C enabled smartphones, tablets, and small electronic devices.

For iPhone 14 series and earlier models (with Lightning port), a separate USB-C to Lightning cable is required for charging via the power bank's USB-C port.

Maintenance

• Keep the power bank away from extreme temperatures, direct sunlight, and liquids.
• Store in a cool, dry place when not in use.
• Clean the device with a soft, dry cloth. Avoid harsh chemicals or abrasive materials.
• Do not attempt to disassemble or repair the device yourself.

Troubleshooting

Device Not Charging / Slow Charging

• Ensure the power bank itself is sufficiently charged.
• Verify that the USB-C connector is fully inserted into your device.
• Check if your device is compatible with the USB-C connector. If using an older iPhone model (with Lightning port), ensure you are using a USB-C to Lightning cable connected to the power bank's USB-C port.
• If charging a low-power device, ensure trickle charging mode is activated.
• Some phone cases up to 0.19 inches (4.9 mm) thick are compatible. Thicker cases may interfere with the connection.

Power Bank Not Charging

• Ensure the charging cable is securely connected to both the power bank's input port and a functioning wall adapter.
• Try using a different USB-C charging cable and wall adapter.

Specifications

Warranty & Support

Your Anker Nano Power Bank comes with a 24-month worry-free warranty and friendly customer service. For support, please refer to the contact information provided in your Welcome Guide or visit the official Anker website.