Introduction
Thank you for choosing the DERMALOGIC 5L Towel Warmer and UV Sterilizer. This appliance is designed to provide warm, sanitized towels for various applications, including beauty salons, spas, gyms, and home use. Please read this manual thoroughly before operation to ensure safe and efficient use of your new towel warmer.
Safety Information
This appliance is intended for professional spa salon equipment and furniture use. Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Ensure the appliance is placed on a stable, heat-resistant surface.
- Do not immerse the unit in water or other liquids.
- Keep out of reach of children.
- Unplug the unit when not in use and before cleaning.
- Do not operate the appliance with a damaged cord or plug.
- The power will automatically turn off when the cavity temperature reaches 158°F - 176°F.
- The UV lamp is designed for sterilization; avoid direct eye exposure.
- This product is CE certified, ensuring compliance with health, safety, and environmental protection standards.
Product Features
- Pull Down Door: Convenient access to towels.
- Power Rating: HOT 200W, UV E17 Lamp 3W.
- Auto-shutdown Feature: Automatically turns off when maximum temperature (158°F - 176°F) is reached.
- 5L Tank Capacity: Accommodates multiple towels.
- UV Sterilization: Integrated UV lamp for enhanced hygiene.
- Stainless Steel Rack: Durable internal shelving for towel placement.
- Removable Water Tray: Collects condensation for easy cleaning.
- Rubber Seal: Ensures efficient heat retention and door closure.
Image: Key features of the DERMALOGIC Towel Warmer, highlighting the stainless steel rack, pull-down door, water tray, and rubber seal.
Image: The towel warmer with its UV lamp activated, demonstrating the enhanced hygiene feature for sterilizing towels.
Setup
- Unpack: Carefully remove the towel warmer from its packaging. Retain packaging for future transport or storage.
- Placement: Place the unit on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
- Water Tray: Insert the removable water tray into the designated slot at the bottom of the unit. This tray collects condensation.
- Power Connection: Plug the power cord into a suitable electrical outlet. Ensure the voltage matches the appliance requirements.
Operating Instructions
- Loading Towels: Open the pull-down door. Place clean, damp (not soaking wet) towels onto the stainless steel rack inside the warmer. Do not overload the unit.
- Close Door: Securely close the pull-down door.
- Power On: Locate the power switch (often labeled with a power symbol) on the control panel. Flip the switch to the 'ON' position to begin the heating process.
- UV Sterilization: If desired, activate the UV lamp by flipping the separate UV light switch (often labeled with a sun or UV symbol) to the 'ON' position. The UV light operates when the door is closed.
- Heating Cycle: The unit will heat the towels to a temperature between 158°F and 176°F. Once this temperature is reached, the auto-shutdown feature will temporarily turn off the heating element. The heating element will automatically power back on once the temperature lowers.
- Removing Towels: Use tongs or heat-resistant gloves to carefully remove hot towels from the unit.
Image: Detailed view of the dual switch buttons on the control panel, one for the UV light and one for the heating function.
Video: This video demonstrates the loading of towels, activation of the UV light, and the auto shut-off/turn-on functions of the DERMALOGIC Towel Warmer. It also highlights the removable water tray and pull-down door.
Maintenance
- Cleaning the Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Cleaning the Interior: Periodically clean the interior of the warmer. Ensure the unit is unplugged and completely cooled before cleaning. Remove the stainless steel rack and water tray. Wipe down interior surfaces with a damp cloth.
- Emptying Water Tray: Regularly empty and clean the removable water tray to prevent mineral buildup and odors.
- UV Lamp Replacement: The UV E17 lamp has a limited lifespan. If the UV light stops working, consult the manufacturer for replacement instructions or service.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. Ensure the power switch is in the 'ON' position. |
| Towels are not hot enough. | Unit not preheated sufficiently; Overloaded; Auto-shutdown engaged. | Allow sufficient time for the unit to preheat (approx. 15-20 minutes). Do not overload the unit; ensure proper air circulation. The auto-shutdown feature is normal operation; the unit will reheat automatically. |
| UV light is not visible. | Door is open; UV lamp is off or faulty. | Ensure the door is completely closed. Verify the UV light switch is in the 'ON' position. The UV light is designed to operate when the door is closed. If the light is still not visible, the lamp may need replacement. |
| Unpleasant odor. | Dirty interior or water tray. | Clean the interior of the unit and the water tray thoroughly. Ensure towels are clean before warming. |
Specifications
- Model: 5L
- Outer Dimensions: 11.5"H x 10"L x 8.5"W
- Inner Dimensions: 7"H x 7"L x 6.5"W
- Tank Capacity: 5 Liters
- Weight: 8 Pounds
- Power Rating: HOT 200W, UV E17 Lamp 3W
- Cavity Temperature: 158°F - 176°F (70°C - 80°C)
- Manufacturer: DERMALOGIC
Image: Visual representation of the towel warmer with its external dimensions clearly marked.
Warranty
This DERMALOGIC Towel Warmer is covered by the manufacturer's standard warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or contact DERMALOGIC customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Support
For technical assistance, replacement parts, or any questions regarding your DERMALOGIC Towel Warmer, please contact DERMALOGIC customer support. You can typically find contact information on the product packaging, the official DERMALOGIC website, or through your retailer.
