Product Overview
The EagleStone Automatic Toy Gun (Model 803A) is an electric foam blaster designed for recreational use. It features multiple shooting modes, automatic shell ejection, and comes with rechargeable batteries and a large supply of darts and bullet shells. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal performance.
Figure 1: Eaglestone Automatic Toy Gun and included accessories. This image displays the red toy gun, safety glasses, multiple targets, 150 soft darts, and 30 bullet shells.
Package Contents
Before assembly, verify that all components listed below are present in your package:
- 1x Soft Bullet Gun (Main Blaster Body)
- 2x Lithium Batteries (7.4V 500mAh rechargeable)
- 1x USB Charging Cable
- 1x Goggles (Safety Glasses)
- 1x Screwdriver
- 3x Rebound Targets
- 150x Soft Bullets (Foam Darts)
- 30x Bullet Shells
Figure 2: Detailed view of all items included in the product package. This diagram visually lists the soft bullet gun, two lithium batteries, USB charging cable, goggles, screwdriver, three rebound targets, 150 soft bullets, and 30 bullet shells.
Setup and Assembly
Follow these steps to assemble your Eaglestone Automatic Toy Gun. Ensure the blaster is powered off and the battery is not installed during assembly.
- Toy Gun Head Installation: Align the front barrel section with the main body of the toy gun and securely attach it.
- Sight Installation: Mount the adjustable 6x scope onto the designated rail on top of the blaster. Ensure it clicks into place or is tightened securely.
Figure 3: Installation of the sight onto the blaster's top rail.
- Buttstock Mounting: Attach the buttstock to the rear of the toy gun body. Push firmly until it locks securely.
Figure 4: Attaching the adjustable buttstock.
- Assemble the Magazine: Connect the individual bullet shells to form the continuous bullet belt magazine.
Figure 5: Assembling the bullet belt magazine from individual shells.
- Load the Bullets: Insert the soft foam darts into the bullet shells on the assembled magazine belt.
- Install the Battery: Open the battery compartment and connect one of the fully charged 7.4V 500mAh lithium batteries. Close the compartment securely.
Figure 6: Inserting the rechargeable battery into its compartment.
Figure 7: Comprehensive visual guide for the assembly process. This image illustrates the eight main steps for setting up the toy gun, from installing the gun head to high-speed shooting.
Operating Instructions
Shooting Modes
The Eaglestone Automatic Toy Gun offers three distinct shooting modes for varied play experiences:
- Full Auto: Hold the trigger to fire a continuous burst of darts. This mode is ideal for rapid firing.
- Safe (Manual Single-Shot): In this mode, the blaster requires manual priming for each shot. This allows for a more controlled, single-shot experience.
- Semi-Auto: Press the trigger once for each single shot. This mode provides a balance between rapid firing and controlled shooting.
Figure 8: Visual representation of the three selectable shooting modes. This image shows the selector switch positions for Manual, Auto Single Shot, and Auto Burst modes.
Shell Ejection and Range
This motorized blaster features an automatic shell ejection mechanism, simulating a realistic firing experience. Each shot with a dart will cause an empty shell to pop up automatically.
The blaster is capable of achieving an accurate range of approximately 35-50 feet (10.6-15.2 meters) with its high-speed motor. The adjustable 6x scope enhances aiming precision for improved accuracy.
Figure 9: Illustration of the blaster's long-range capability, showing a dart trajectory towards a target.
Battery Charging and Usage
The toy gun operates on two 7.4V 500mAh rechargeable lithium batteries. Use the provided USB charging cable to charge the batteries. A full charge typically takes a few hours and provides several hours of operation.
The blaster can also be used without batteries by manually pulling back the charging handle to prime it for single shots.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your toy gun.
- Cleaning: Regularly wipe down the exterior of the blaster with a clean, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
- Dart and Shell Management: Ensure darts and shells are clean and undamaged before use to prevent jamming. Store darts and shells in a dry place away from direct sunlight.
- Battery Care:
- Always use the provided USB charging cable and charger.
- Do not overcharge the batteries. Disconnect once fully charged.
- If storing the blaster for an extended period, remove the batteries.
- Store batteries in a cool, dry place.
- Lubrication: Do not attempt to lubricate internal mechanisms unless specifically instructed by the manufacturer.
Troubleshooting
If you encounter issues with your Eaglestone Automatic Toy Gun, refer to the following common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blaster not firing or weak firing. | Low battery charge or improperly installed battery. | Ensure battery is fully charged and correctly installed. Try the second battery. |
| Darts jamming. | Damaged darts, improperly loaded darts, or foreign objects in the barrel. | Remove the magazine and clear any jammed darts. Use only undamaged darts. Ensure darts are fully inserted into shells. |
| Shells not ejecting. | Mechanism obstruction or incorrect mode. | Check for any obstructions in the ejection port. Ensure the blaster is in an automatic firing mode (Full Auto or Semi-Auto). |
| Blaster making unusual noises. | Internal obstruction or component misalignment. | Power off the blaster immediately. Check for any visible obstructions. If the issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 31.49 x 16.2 x 8.95 inches (79.98 x 41.15 x 22.73 cm) |
| Item Weight | 3.1 pounds (1.4 kg) |
| Model Number | 803A |
| Manufacturer Recommended Age | 6 years and up |
| Batteries | 2 Lithium Ion batteries (7.4V 500mAh) required and included |
| Shooting Modes | Full Auto, Safe (Manual Single-Shot), Semi-Auto |
| Dart Capacity | 30-round bullet belt magazine |
| Included Darts | 150 soft foam darts |
| Included Shells | 30 bullet shells |
| Range | Approximately 35-50 feet (10.6-15.2 meters) |
| Scope | Adjustable 6x scope |
Safety Information
Always prioritize safety when operating the toy gun:
- Always wear the provided safety goggles during use.
- Do not aim at eyes or face.
- Use only darts designed for this product. Do not modify darts or the blaster.
- Do not fire at close range.
- Keep away from small children and pets.
- Supervise children during play.
Warranty and Support
Specific warranty details for the Eaglestone Automatic Toy Gun are not provided within this manual. For warranty claims, technical support, or replacement parts, please refer to the product packaging or contact EagleStone customer service directly through their official website or the retailer where the product was purchased.
You may visit the official EagleStone Store on Amazon for more information: EagleStone Store
