Sunbeam 12719

Sunbeam Royal Mink/Sherpa Heated Throw Electric Blanket User Manual

Model: 12719

Important Safety Instructions

Please read all instructions carefully before using your Sunbeam Heated Throw Electric Blanket. Failure to follow these instructions may result in fire, electric shock, or injury.

Do not use with an infant, a child, an incapacitated person, or anyone insensitive to heat.
Do not use with a bedridden person.
Do not use with a damaged cord or plug.
Do not use with a damaged control.
Do not use with pins or other metallic objects.
Do not use with pets.
Do not dry clean. Dry cleaning solvents may damage the insulation.
Do not bleach.
Do not iron.
Do not use with a generator, power converter, or inverter.
Always disconnect the control from the blanket before washing.
Ensure the connector is securely fastened before plugging into an outlet.
This blanket is designed for continuous use of up to 4 hours before automatic shut-off.

Setup

Before first use, ensure all packaging materials are removed. Unfold the blanket completely and lay it flat on your desired surface (couch, bed, chair).

Connect the Control: Locate the electrical plug on the blanket. This is typically indicated by a label. Ensure the plug is on the top side of the blanket, not covered underneath. Align the arrow on the control unit's connector with the arrow on the blanket's plug. Push firmly until you hear a click, ensuring a secure connection.
Plug into Power: Once the control is securely connected to the blanket, plug the power cord into a standard 120V AC electrical outlet.

Sunbeam Heated Throw Electric Blanket with controller — Figure 1: Sunbeam Heated Throw Electric Blanket with its controller. The blanket is folded, showing its plush texture. The controller is white with a grey power button and indicator lights for heat settings.

Diagram showing the dimensions of the Sunbeam Heated Throw Electric Blanket — Figure 2: A diagram illustrating the dimensions of the heated throw blanket, measuring 50 inches in width and 60 inches in length. This indicates it is a standard throw size.

Operation

Your Sunbeam Heated Throw features an easy-to-use push-button controller with multiple heat settings and an automatic shut-off function.

Power On: Press the power button on the controller once to turn on the blanket. The indicator light will illuminate, typically starting at the lowest heat setting.
Adjust Heat Settings: Press the power button repeatedly to cycle through the available heat settings (Low, Medium, High). The corresponding indicator light will show the selected setting. This model offers 4 heat settings.
Automatic Shut-Off: The blanket is equipped with a 4-hour auto-shut off feature for safety and energy conservation. After 4 hours of continuous use, the blanket will automatically turn off.
Power Off: To turn off the blanket manually, press the power button until all indicator lights are off. Always unplug the blanket from the wall outlet when not in use.

Video: This video demonstrates the features of Sunbeam Royal Sherpa Heated Throws, including the simple push-button control with 4 heat settings and a 4-hour auto-off function. It highlights the cozy warmth of the 100% high-quality polyester material and the ideal 50"x60" size for snuggling. The video also shows the machine washable and dryer safe care instructions, emphasizing the need to detach the controller first. It concludes by mentioning the Sense & Adjust heating technology for even warmth and overheating prevention.

Care & Maintenance

Proper care ensures the longevity and safe operation of your heated throw.

Disconnect Power: Always unplug the blanket from the wall outlet and disconnect the control unit from the blanket before cleaning.
Machine Washable: The blanket is machine washable. Wash on a cold water, gentle cycle.
Drying: Tumble dry on a low, delicate cycle. Do not use high heat. For best results, remove the blanket while still damp and stretch it to its original size, then hang to air dry completely.
Storage: Store the blanket in a cool, dry place. Avoid folding it tightly or placing heavy objects on it, which could damage the internal wiring.

Image showing how to disconnect the controller and machine wash the blanket — Figure 3: Instructions for disconnecting the controller by squeezing the hinges on both sides to unplug easily, followed by an image of a washing machine with the blanket inside, indicating "Machine Wash in cold water, gentle cycle" and "Tumble dry low, delicate cycle."

Troubleshooting

If your heated throw is not operating correctly, please refer to the following common issues and solutions:

Problem	Possible Cause	Solution
Blanket not heating.	Not properly plugged in; control not connected securely; power outage.	Ensure all connections are secure. Check the wall outlet. Press the power button to cycle through heat settings.
Blanket heats unevenly.	Blanket is folded or bunched up.	Lay the blanket flat and smooth out any folds or bunches.
Control lights flashing.	Internal error or overheating protection activated.	Unplug the blanket from the outlet for 5 minutes, then plug it back in and try again. If the issue persists, contact customer support.

If troubleshooting steps do not resolve the issue, please contact Sunbeam Customer Service.

Specifications

Model: 12719
Dimensions: 50"L x 60"W
Material: 100% Polyester (Royal Mink/Sherpa)
Heat Settings: 4 Levels
Auto Shut-Off: 4 Hours
Care: Machine Washable, Dryer Safe (Low Heat)
Included Components: Heated Throw, Remote Control
Item Weight: 2.78 pounds

Warranty & Support

This Sunbeam Heated Throw Electric Blanket comes with a 5-year limited warranty. For warranty claims, product support, or further assistance, please visit the official Sunbeam website or contact their customer service department.

Official Sunbeam Store: Visit the Sunbeam Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.