TFA Dostmann BBQ Thermometer Transmitter View

Product Overview

The TFA Dostmann BBQ Thermometer Transmitter View is a sophisticated device designed for precise temperature monitoring during various cooking processes such as barbecuing, grilling, and smoking. It features wireless transmission capabilities, allowing you to monitor temperatures remotely via a compatible TFA View WLAN weather station and the dedicated View app on your mobile device.

Key features include:

• Wireless transmission of temperature data up to 100 meters.
• Equipped with two durable stainless steel probes for simultaneous measurement of core temperatures or ambient temperatures.
• Compatibility with TFA View WLAN weather stations and the View app for remote monitoring and alarm settings.
• Integrated backlight for easy readability in low-light conditions.
• Convenient cable winding aid and brackets for organized storage.

Image: The TFA Dostmann BBQ Thermometer Transmitter View main unit shown with its two temperature probes, ready for use.

Setup Guide

1. Unpacking and Components

Carefully unpack all components and ensure the following items are present:

• Wireless BBQ thermometer transmitter unit
• Two penetration sensors with 150 cm cables
• Two cable winding aids and brackets
• Instruction manual (this document)

2. Battery Installation

The transmitter unit requires batteries for operation. Locate the battery compartment on the back of the unit. Insert the required batteries (typically AAA, not included) ensuring correct polarity (+/-). Close the battery compartment securely.

Image: Rear view of the thermometer unit, displaying the battery compartment and product information label. The label includes details such as "TFA Dostmann", "Zum Ottersberg 12", "D-97877 Wertheim", "www.tfa-dostmann.de", "Freq: 868 MHz", and a barcode/serial number 580D01-7vx.

3. Probe Connection

Connect the two temperature probes to the designated ports on the side of the transmitter unit. Ensure they are firmly inserted. The unit is designed to work with both probes simultaneously.

Image: The main thermometer unit with both temperature probes securely connected to its side ports, ready for temperature measurement.

4. Pairing with View App / WLAN Station

For remote monitoring, the BBQ thermometer transmitter must be paired with a compatible TFA View WLAN weather station (e.g., models 35.8000.01, 35.8001.01, 35.8002.01, 35.8003.01) and the View app. Follow the instructions provided with your View WLAN station and the View app for the pairing process. This connection enables reading measured values and setting alarms on your mobile device.

Operating Instructions

1. Powering On/Off

Press and hold the power button (⏻) located on the front of the unit to turn the device on or off. The display will illuminate upon activation.

2. Display Information

The large display shows the current temperature readings from both connected probes. Probe A and Probe B readings are typically displayed simultaneously. The display also indicates connection status and other relevant information.

Image: A close-up view of the thermometer's digital display, showing a temperature reading of 82°C and a time of 7:28 PM, along with a signal strength indicator.

3. Using the Probes

Insert the stainless steel probes into the food item you wish to monitor. For accurate core temperature readings, ensure the tip of the probe is in the thickest part of the meat, avoiding bone or gristle. The 150 cm cable allows for flexible placement of the transmitter unit away from direct heat.

Image: The thermometer unit placed on a grill surface, with a probe inserted into a food item (not visible), displaying a temperature of 41°C and a time of 7:55 PM.

Image: The thermometer unit positioned next to a platter with a large cut of meat, demonstrating a probe inserted into the meat, displaying a temperature of 23°C and a time of 7:43 PM.

4. Setting Alarms (via View App)

To set target temperatures and receive alerts, use the TFA View app on your mobile device. Within the app, you can configure specific temperature alarms for each probe. The app will notify you when the desired temperature is reached, ensuring optimal cooking results.

5. Backlight Function

The unit features a backlight for improved visibility in dim lighting conditions. The backlight typically activates automatically when a button is pressed or can be toggled via a dedicated button if available (refer to the View app or WLAN station manual for specific controls).

Maintenance

Cleaning

After each use, clean the stainless steel probes thoroughly with warm, soapy water. Wipe the main transmitter unit with a soft, damp cloth. Do not immerse the main unit in water. Ensure all components are dry before storage.

Storage

Store the thermometer and probes in a clean, dry place when not in use. Utilize the provided cable winding aids and brackets to keep the probe cables neatly organized and prevent damage.

Battery Replacement

Replace batteries when the low battery indicator appears on the display or when the unit fails to power on. Always use new batteries of the specified type and dispose of old batteries responsibly.

Troubleshooting

Specifications

Warranty and Support

TFA Dostmann is a family business specializing in high-quality weather and measurement technology. For any questions, technical support, or warranty claims regarding your BBQ Thermometer Transmitter View, please contact TFA Dostmann directly through their official website or customer service channels. Please retain your proof of purchase for warranty purposes.

For more information, visit: www.tfa-dostmann.de