L LAVAREDO SKM1266Man Digital Sport Watch Instruction Manual

Introduction

Welcome and thank you for choosing the L LAVAREDO SKM1266Man Digital Sport Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

L LAVAREDO SKM1266Man Digital Sport Watch, grey color, displaying time and date.

Key Features

Your L LAVAREDO SKM1266Man Digital Sport Watch is equipped with the following functions:

• Digital Time Display (12/24-hour format)
• Alarm Function
• Calendar (Day, Date, Month)
• Stopwatch Function
• LED Backlight for low-light conditions
• Durable Silicone Resin Band
• 5ATM Water Resistance

Watch Components and Button Functions

Your L LAVAREDO SKM1266Man watch features four primary buttons for operation. Refer to the diagram below for their locations and functions.

Diagram showing the L LAVAREDO SKM1266Man digital watch with labels for EL Light Button, Start/Stop Button, Mode Button, and Reset Button. Inset shows display elements: Week, PM, Time, Seconds, Date.

• EL Light Button (Top Left): Activates the LED backlight for a few seconds.
• Mode Button (Bottom Left): Cycles through different operational modes (Timekeeping, Stopwatch, Alarm).
• Start/Stop Button (Top Right): Used to start/stop functions in Stopwatch mode, and to adjust values during time or alarm setting.
• Reset Button (Bottom Right): Used to reset functions in Stopwatch mode, and to select setting items during time or alarm setting.

Initial Setup

Setting Time and Date

1. From the normal Timekeeping Mode, press the Mode Button three times to enter Time Setting Mode. The seconds digits will begin to flash.
2. Press the Reset Button to cycle through the setting items in the following order: Seconds → Hours → Minutes → Month → Date → Day of Week. The currently selected item will flash.
3. Use the Start/Stop Button to adjust the flashing value. Hold the button to change values rapidly.
4. Once all settings are correct, press the Mode Button to exit Time Setting Mode and return to Timekeeping Mode.

Setting the Alarm

1. From the normal Timekeeping Mode, press the Mode Button twice to enter Alarm Setting Mode. The hour digits of the alarm time will flash.
2. Press the Reset Button to switch between setting the alarm hours and minutes.
3. Use the Start/Stop Button to adjust the flashing value for hours or minutes.
4. Once the desired alarm time is set, press the Mode Button to exit Alarm Setting Mode.

Activating/Deactivating Alarm and Hourly Chime

• In Alarm Mode (press Mode Button twice), press the Start/Stop Button to toggle the alarm ON/OFF. An alarm icon will appear/disappear on the display.
• In Alarm Mode, press the Reset Button to toggle the hourly chime ON/OFF. A chime icon will appear/disappear on the display.

Operating Your Watch

Stopwatch Function

1. From the normal Timekeeping Mode, press the Mode Button once to enter Stopwatch Mode. The display will show '00:00:00'.
2. Press the Start/Stop Button to start the stopwatch.
3. Press the Start/Stop Button again to stop the stopwatch.
4. Press the Reset Button to reset the stopwatch to zero.
5. To exit Stopwatch Mode and return to Timekeeping Mode, press the Mode Button.

LED Backlight

Press the EL Light Button (top left) to illuminate the display for a few seconds, allowing you to read the time in dark environments.

Water Resistance Guidelines

L LAVAREDO SKM1266Man digital watch with water splashes, indicating 5ATM waterproof rating.

Your L LAVAREDO SKM1266Man watch is rated 5ATM (50 meters) water resistant. This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water.

Important Water Resistance Notes:

• Do not press any buttons while the watch is underwater.
• Avoid frequent contact with hot water or steam (e.g., hot showers, saunas), as this can compromise the watch's seals.
• Do not wear the watch when showering, bathing, or swimming for extended periods.
• The 50-meter rating refers to static pressure. Actual water pressure during dynamic activities (like swimming or diving) can exceed this rating.
• After contact with saltwater, rinse the watch with fresh water and dry it thoroughly.

Care and Maintenance

• Cleaning: Wipe the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
• Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes.
• Chemicals: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, band, or seals.
• Battery: When the display dims or functions become erratic, the battery may need replacement. This should be performed by a qualified watch technician to ensure water resistance is maintained.

Troubleshooting

Product Specifications

Warranty and Support

This L LAVAREDO watch comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions regarding coverage and duration.

For further assistance, technical support, or inquiries about your watch, please contact your retailer or visit the official L LAVAREDO website for customer service information.