TOLEBLID 4.0 Cubic Feet Fireproof Home Safe Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your TOLEBLID 4.0 Cubic Feet Fireproof Home Safe. Please read this manual thoroughly before using the safe and retain it for future reference. Proper understanding of these instructions will ensure optimal security and longevity of your product.

Image 1.1: The TOLEBLID 4.0 Cubic Feet Fireproof Home Safe, shown with its door open, displaying internal storage compartments, a separate lock box, and various valuables.

2. Safety Information

Observe the following safety precautions to prevent injury or damage to the safe:

• Always keep emergency keys in a secure location away from the safe and not inside it.
• Ensure the safe is placed on a stable, level surface or securely mounted to a wall or floor to prevent tipping.
• Do not store flammable liquids or materials inside the safe.
• Keep children away from the safe and do not allow them to play with the locking mechanism or keys.
• Avoid exposing the safe to extreme temperatures or direct moisture, despite its fire and water-resistant properties.

3. Package Contents

Verify that all items are present in the package:

• TOLEBLID 4.0 Cubic Feet Fireproof Home Safe
• Emergency Keys (2)
• External Battery Box
• Expansion Screws (4) for mounting
• Fireproof and Waterproof Document Bag
• Instruction Manual (this document)

4. Setup

4.1 Unpacking and Placement

Carefully remove the safe from its packaging. Choose a suitable location that is dry, level, and discreet. Consider mounting the safe for enhanced security.

4.2 Initial Opening (Using Emergency Key)

1. Locate the emergency keyhole, usually concealed behind the keypad cover or a small emblem.
2. Insert one of the emergency keys into the keyhole and turn it clockwise.
3. Simultaneously turn the handle clockwise to open the safe door.

4.3 Battery Installation

The safe requires 4 AA batteries (not included) for the electronic keypad. The battery compartment is typically located on the inside of the safe door.

1. Open the safe door using the emergency key.
2. Locate the battery compartment cover on the inside of the door.
3. Remove the cover and insert 4 new AA batteries, observing the correct polarity (+/-).
4. Replace the battery compartment cover.

4.4 Setting User Code

It is recommended to set a personal user code immediately after battery installation.

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge or battery compartment). You will hear a beep.
2. On the keypad, enter your desired 3-8 digit code.
3. Press the '#' button to confirm. The safe will beep twice, indicating successful code setting.
4. Test the new code with the door open before closing it. Enter your code, then press '#' and turn the handle.

4.5 Mounting the Safe

For enhanced security, the safe can be bolted to a floor or wall using the pre-drilled holes and included expansion screws.

1. Choose a suitable mounting location.
2. Mark the positions for drilling through the pre-drilled holes on the back or bottom of the safe.
3. Drill pilot holes in the wall or floor using an appropriate drill bit.
4. Align the safe with the drilled holes and secure it using the expansion screws.

4.6 Internal Configuration

The safe features a removable shelf and a separate lock box for organized storage.

Image 4.1: The safe's interior demonstrating the flexibility of the removable shelf for accommodating various item sizes.

• The removable shelf can be adjusted or removed to accommodate larger items.
• The internal lock box provides an additional layer of security for smaller, highly valuable items.
• Use the integrated hooks on the inside of the door for hanging keys or small items.

5. Operation

5.1 Opening with User Code

1. Enter your 3-8 digit user code on the keypad.
2. Press the '#' button. The display will show 'OPEN' and you will hear a click.
3. Within 5 seconds, turn the handle clockwise to open the door.

5.2 Opening with Master Key (Emergency Override)

This method is used if you forget your code or the batteries are depleted.

1. Insert the emergency key into the keyhole and turn it clockwise.
2. Turn the handle clockwise to open the door.

5.3 Opening with External Battery Box

If the internal batteries are depleted and you do not have the emergency key readily available, use the external battery box.

1. Insert 4 new AA batteries into the external battery box.
2. Plug the external battery box into the port located on the keypad.
3. Enter your user code on the keypad and press '#'.
4. Turn the handle clockwise to open the door.

5.4 Locking the Safe

To lock the safe, simply close the door and turn the handle counter-clockwise until it is fully engaged. The safe will automatically lock.

5.5 Anti-Theft Alarm System

The safe is equipped with an anti-theft alarm system.

Image 5.1: Visual representation of the safe's anti-theft system, highlighting its vibration alert and multiple incorrect password entry alarm.

• Violent Vibration Alert: If the safe experiences a strong impact or violent movement, an alarm will sound.
• Password Error Alert: If an incorrect code is entered three consecutive times, the alarm will activate.
• To silence the alarm, enter the correct user code or use the emergency key.

6. Maintenance

6.1 Battery Replacement

Replace the batteries annually or when the low battery indicator appears on the display. Use high-quality alkaline batteries for best performance.

6.2 Cleaning

Clean the safe's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.

6.3 Key Storage

Always store the emergency keys in a secure, hidden location outside the safe. Do not store them inside the safe, as this would prevent access if the electronic lock fails or batteries deplete.

7. Troubleshooting

• Safe will not open with code:
  a. Ensure batteries are not depleted. Replace if necessary.
  b. Re-enter the code carefully. If multiple incorrect attempts, the alarm may activate.
  c. Use the emergency key to open the safe.
• Keypad is unresponsive:
  a. Check battery installation and polarity.
  b. Replace batteries with new ones.
  c. If still unresponsive, use the external battery box to power the keypad.
• Alarm sounds unexpectedly:
  a. The safe may have experienced a strong vibration or impact.
  b. Someone may have attempted to enter an incorrect code multiple times.
  c. Enter the correct code or use the emergency key to silence the alarm.
• Door does not close properly:
  a. Ensure no obstructions are preventing the door from fully closing.
  b. Check if the locking bolts are retracted before closing.
• Forgotten User Code:
  a. Use the emergency key to open the safe.
  b. Once open, press the red reset button on the inside of the door and set a new user code (refer to Section 4.4).

8. Specifications

Image 8.1: The TOLEBLID safe with key dimensions indicated for reference.

Image 8.2: Detail of the safe's 25mm bold locking bolts, demonstrating the secure locking mechanism.

9. Warranty and Support

9.1 Lifetime Warranty

Your TOLEBLID safe is backed by a lifetime warranty, ensuring long-term peace of mind regarding manufacturing defects and material quality.

9.2 Return and Exchange Service

We offer a 120-day return or exchange service from the date of purchase. Please refer to your purchase documentation for specific terms and conditions.

9.3 Customer Support

For any questions, technical assistance, or warranty claims, please contact our customer support team. We provide 24-hour online service to assist you.

• Online Support: Refer to the contact information provided with your purchase or on the official TOLEBLID website.
• When contacting support, please have your model number (TOLEBLID-LARGE-SAFE-BOX) and purchase date available.