Introduction
Thank you for choosing the ULTRAPROLINK Vylis Auto20 UM1140 Magnetic Mag-Safe 3-in-1 Wireless Car Charger Dock. This device is designed to provide convenient and efficient wireless charging for your compatible iPhone, Apple Watch, and AirPods simultaneously while driving. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.
Image: The ULTRAPROLINK Vylis Auto20 3-in-1 Wireless Car Charger Dock, showcasing its ability to charge an iPhone, Apple Watch, and AirPods simultaneously.
What's in the Box
Please check the package contents upon opening:
- ULTRAPROLINK Vylis Auto20 3-in-1 Wireless Car Charger Dock
- C2C Charging Cable (USB-C to USB-C) x1
- Telescopic Arm x1
- Universal Ring x1 (for non-magnetic phones)
- User Manual x1
Setup Instructions
1. Mounting the Charger
The Vylis Auto20 offers dual mounting options for your convenience: dashboard or windshield.
- Choose Location: Select a flat, clean surface on your dashboard or windshield that does not obstruct your view or interfere with driving controls.
- Attach Suction Cup: Press the gel-based suction cup firmly onto the chosen surface. Flip the lever on the suction cup base to lock it in place, ensuring a secure grip.
- Adjust Telescopic Arm: Use the telescopic arm to extend and pivot the charger to your desired viewing angle. The adjustable ball joints allow for both horizontal and vertical phone orientation.
Image: The car charger mounted on both a dashboard and a windshield, illustrating the adjustable telescopic arm and gel-based suction cup.
2. Connecting Power
Connect the provided C2C Charging Cable to the Type-C input port on the charger and to a compatible USB-C car adapter (not included) with sufficient power output (e.g., 20W or higher for optimal performance).
Image: Close-up of the charger showing the Type-C input port and the C2C charging cable.
3. Using the Universal Ring (for Non-Magnetic Phones)
If your phone does not have built-in Mag-Safe compatibility or a Mag-Safe case, you can use the included universal mounting ring to enable magnetic attachment and wireless charging.
- Clean Surface: Ensure the back of your phone or phone case is clean and dry.
- Attach Ring: Carefully peel off the adhesive backing from the universal ring and center it on the back of your phone or phone case. Press firmly for several seconds to ensure a strong bond.
- Verify Placement: Ensure the ring does not obstruct your phone's camera or other essential functions.
Note: This product will not support regular cases unless used with the universal mounting ring.
Image: A smartphone with a universal ring attached to its back, demonstrating how it enables magnetic wireless charging with the car charger.
Operating Instructions
1. Charging Your iPhone (Mag-Safe Compatible)
Align your Mag-Safe compatible iPhone (iPhone 12 series and newer, or phones with a Mag-Safe case) with the magnetic charging pad on the charger. The strong magnets will securely hold your phone in place, and wireless charging will begin automatically. The charger provides up to 15W for compatible iPhones.
Image: An iPhone magnetically attached to the charger, showing the Mag-Safe connection and charging indicator.
2. Charging Your Apple Watch
Place your Apple Watch on the dedicated charging module. Ensure the watch is properly aligned for charging to initiate. The charger provides 2.5W for compatible iWatch series.
3. Charging Your AirPods
Place your AirPods (with wireless charging case) on the designated charging area. Ensure proper placement for charging to begin. The charger provides 5W for compatible AirPods.
Image: Diagram illustrating the 20W total power distribution, showing 15W for iPhone, 5W for AirPods, and 2.5W for iWatch.
The charger can accommodate three devices simultaneously, providing a total output of 20W (15W for iPhone, 5W for AirPods, 2.5W for iWatch).
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the charger. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight.
- Cable Care: Avoid bending or twisting the charging cable excessively to prevent damage.
- Suction Cup: If the gel-based suction cup loses its stickiness, rinse it with warm water and let it air dry to restore adhesion.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device not charging wirelessly. |
|
| Slow charging. |
|
| Charger not sticking to surface. |
|
| Phone falling off the mount. |
|
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | UM1140 |
| Brand | ULTRAPROLINK |
| Input Voltage | 5 Volts (DC) |
| Wattage | 20 Watts (Total Output) |
| Output Current | 3 Amps |
| Output Voltage | 5 Volts (DC) |
| Connector Type | USB Type C |
| Special Features | Fast Charging, Magnetic (Mag-Safe compatible) |
| Compatible Devices | iPhone 12/13/14/15/16 (Mag-Safe), Apple Watch Series, AirPods with wireless charging |
| Mounting Type | Tabletop Mount (referring to the base, but functions as car mount) |
| Connectivity Technology | Wireless |
| Item Weight | 340 Grams |
| Country of Origin | China |
| UPC | 700721359233 |
Warranty Information
The ULTRAPROLINK Vylis Auto20 UM1140 comes with a 1-Year Replacement Warranty against any manufacturing defects. To activate your warranty, please scan the QR code provided on the product packaging or visit the official ULTRAPROLINK website.
For warranty claims or further details, please contact customer support using the information provided below.
Customer Support
For any queries, technical assistance, or support, please reach out to ULTRAPROLINK customer service:
- Phone: +91-9312229953 (Available 24x7)
- Email: support@ultraprolink.com
- Manufacturer: Rca Techmart Pvt Ltd, S-28 Okhla Industrial Area Phase -II, New Delhi-110020
- Website: Refer to the official ULTRAPROLINK website for more information and support resources.
- Social Media: Reach us 24x7 via social media channels (links usually found on the brand's website).