Introduction
Thank you for choosing the HOCO E64 Mini Wireless Bluetooth Headset. This manual provides essential information for the safe and efficient use of your new device. Please read it carefully before use and retain it for future reference.
Safety Information
- Do not disassemble, repair, or modify the product. This may cause fire, electronic breakdown, or complete product damage.
- Keep the device away from water, moisture, and other liquids.
- Avoid exposing the device to extreme temperatures (below 0°C or above 45°C).
- Do not use the device during charging.
- Keep out of reach of children.
- Dispose of the product responsibly according to local regulations.
Package Contents
Please check the package for the following items:
- 1 x HOCO E64 Mini Wireless Bluetooth Headset
- 1 x Charging Cable
- Multiple Ear Tips (various sizes)
- 1 x User Manual
Product Overview
The HOCO E64 is a compact, single-sided wireless Bluetooth headset designed for clear communication and audio playback. It features a multi-function touch control button and a built-in microphone.
Figure 1: HOCO E64 Mini Wireless Bluetooth Headset, showing the charging port.
Figure 2: HOCO E64 earbud in use with a smartphone, demonstrating its compact size.
Figure 3: HOCO E64 product packaging, front and back views.
Setup
1. Charging the Headset
Before first use, fully charge the headset. The battery capacity is 50 mAh, and a full charge takes approximately 50 minutes.
- Connect the charging cable to the charging port on the headset (refer to Figure 1).
- Connect the other end of the charging cable to a USB power source (e.g., computer, wall adapter).
- The indicator light will show charging status (refer to product packaging or quick start guide for specific light behavior).
- Once fully charged, disconnect the headset from the power source.
2. Pairing with a Device
The HOCO E64 uses Bluetooth 5.3 for a stable connection.
- Ensure the headset is charged and turned off.
- Press and hold the multi-function button on the headset until the indicator light flashes rapidly (usually blue and red alternately), indicating it is in pairing mode.
- On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices and select "HOCO E64" from the list.
- Once connected, the indicator light on the headset will typically flash slowly or turn off.
- If prompted for a password, enter "0000" (four zeros).
Operating Instructions
Power On/Off
- Power On: Press and hold the multi-function button for approximately 3 seconds until you hear a power-on prompt or see the indicator light.
- Power Off: Press and hold the multi-function button for approximately 5 seconds until you hear a power-off prompt or see the indicator light turn off.
Music Playback
- Play/Pause: Single-tap the multi-function button.
- Next Track: Double-tap the multi-function button.
- Previous Track: Triple-tap the multi-function button.
Call Management
- Answer/End Call: Single-tap the multi-function button during an incoming call or active call.
- Reject Call: Press and hold the multi-function button for approximately 2 seconds during an incoming call.
- Redial Last Number: Double-tap the multi-function button when not on a call.
Language Switch
To switch between Chinese and English voice prompts:
- When the headset is not paired with any device, double-click the multi-function button to cycle through available languages.
Maintenance
- Clean the headset regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the headset in a cool, dry place when not in use.
- Avoid dropping or subjecting the headset to strong impacts.
- Do not expose the charging port to dust or debris.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headset does not power on. | Ensure the headset is fully charged. Press and hold the multi-function button for a longer duration. |
| Cannot pair with device. | Ensure the headset is in pairing mode (flashing indicator light). Turn off and on your device's Bluetooth. Move the headset closer to the device. |
| No sound during playback/calls. | Check the volume level on both the headset and your connected device. Ensure the headset is properly paired. |
| Poor sound quality. | Ensure the headset is within range of your device. Avoid obstacles between the headset and device. Check for interference from other wireless devices. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | E64 |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Dimensions (L x W x H) | 26 x 17 x 24 mm |
| Item Weight | 4.5 grams |
| Bluetooth Version | 5.3 |
| Bluetooth Chip | JL AC6983D |
| Battery Capacity | 50 mAh |
| Charging Time | Approximately 50 minutes |
| Talk/Music Time | Up to 10 hours |
| Standby Time | Up to 100 hours |
| Connectivity Technology | Wireless (Bluetooth) |
| Compatible Devices | Tablets, Phones, Mobile phones |
| Control Type | Media Control, Touch Control |
| Special Features | Includes Microphone |
| Water Resistance Level | Not water resistant |
| Ear Placement | In Ear |
| Noise Control | None |
Warranty Information
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact your retailer for specific warranty terms and conditions. The warranty typically covers defects in materials and workmanship under normal use.
Customer Support
For further assistance, technical support, or warranty claims, please contact the retailer where you purchased the product. You may also visit the official HOCO website for more information and support resources.