HOMEPILOT RolloTron Premium Wall-Mounted Shutter Winder Instruction Manual

1. Overview

The HOMEPILOT RolloTron Premium Wall-Mounted Shutter Winder is designed to modernize and automate your belt-driven roller shutters. This premium version offers advanced functions and ergonomic controls, providing enhanced comfort and convenience in your home. It features an integrated display for easy programming and monitoring of active functions.

This device is ideal for quick installation without extensive renovation work, making it suitable for both new installations and rental properties.

Image: Front view of the HOMEPILOT RolloTron Premium Wall-Mounted Shutter Winder with display and control buttons.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ensure the power supply is disconnected before any installation or maintenance work.
• The device operates on 230 Volts. Only qualified personnel should perform electrical connections if modifications to existing wiring are required.
• Keep the device away from water and moisture.
• Do not open or attempt to repair the device yourself. Contact customer support for assistance.
• This device is intended for indoor use only.

3. Package Contents

Verify that all components are present in the package:

• HOMEPILOT RolloTron Premium Wall-Mounted Shutter Winder
• Mounting bracket
• Screws and wall plugs for mounting
• Power cable (standard IEC/C7)
• Quick Installation Guide

4. Setup and Installation

The RolloTron Premium is designed for wall-mounted installation and is suitable for belt widths of 23 mm. It can handle roller shutters with a maximum pulling force of 30 kg.

4.1 Pre-installation Checks

• Ensure the existing roller shutter belt is 23 mm wide.
• Confirm the roller shutter's weight does not exceed 30 kg.
• Identify a suitable location on the wall near the roller shutter belt, ensuring access to a power outlet.

4.2 Mounting Steps

Follow these steps for wall mounting:

1. Step 1: Remove Old Winder (if applicable)
   Carefully remove your existing manual belt winder.
2. Step 2: Mount the Bracket
   Position the mounting bracket on the wall where the new winder will be installed. Mark the drilling points. Drill holes and secure the bracket using the provided screws and wall plugs.
3. Step 3: Connect the Belt
   With the roller shutter fully closed, extract the belt from its original mechanism. Cut the belt approximately 20 cm longer than the mounting position of the new winder. Create a small loop or slot at the end of the belt as indicated in the detailed manual. Insert the belt into the winder's slot and secure the loop onto the internal hook/pin. Wind the belt a few turns manually to ensure it is firmly attached.
4. Step 4: Attach the Winder to the Bracket
   Slide the RolloTron Premium winder onto the mounted bracket until it clicks into place.
5. Step 5: Connect Power
   Plug the power cable into the device and then into a standard European power outlet.

Image: Visual guide for the installation process, showing mounting the bracket, attaching the winder, and connecting power.

4.3 Dimensions

Image: Diagram illustrating the dimensions of the RolloTron Premium Shutter Winder (15.5 x 3.7 x 18.5 cm).

5. Operating Instructions

The RolloTron Premium offers intuitive control and advanced programming options via its integrated display and buttons.

5.1 Basic Operation

Use the up (▲) and down (▼) buttons on the device to manually open or close your roller shutter. A single press will initiate movement, and another press will stop it.

Image: A hand pressing the control buttons on the RolloTron Premium Shutter Winder.

5.2 Setting End Stops

After initial installation, you must set the upper and lower end stops for your roller shutter. Refer to the detailed manual (available via QR code in the quick guide) for precise instructions on how to program these limits using the display and buttons.

5.3 Programming Automatic Functions

The device allows for individual programming of automatic opening and closing times. The integrated display facilitates setting a weekly schedule.

• Time Setting: Set the current date and time using the display and control buttons.
• Weekly Program: Program specific opening and closing times for weekdays (Monday-Friday) and weekends (Saturday-Sunday). Default settings are often 07:00 for opening and 20:00 for closing on weekdays, and 08:00 for opening and 22:00 for closing on weekends. These can be customized.
• Solar Sensor (Optional): If you have the optional solar sensor accessory, you can program the roller shutter to react to light conditions, automatically closing or opening based on sunlight intensity.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your RolloTron Premium Shutter Winder.

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Belt Inspection: Periodically check the roller shutter belt for signs of wear, fraying, or damage. A damaged belt can affect the winder's operation and may need replacement.
• Operational Check: Occasionally test the manual and automatic functions to ensure smooth operation.

7. Troubleshooting

If you encounter issues with your RolloTron Premium Shutter Winder, refer to the following common solutions:

• Device Not Responding:
  - Check if the power cable is securely plugged into both the device and the power outlet.
  - Verify that the power outlet is functional.
• Time/Program Reset After Power Outage:
  - In case of a power interruption, the device may lose its current time setting. You will need to reset the time. Programmed end stops are typically retained in memory.
• Roller Shutter Not Moving or Stopping Incorrectly:
  - Ensure the belt is correctly attached and not frayed or damaged. A loose or damaged belt can cause operational issues.
  - Re-check the end stop settings. They might need recalibration if the roller shutter is not reaching its full open or closed position.
• Unusual Noises During Operation:
  - This might indicate an issue with the roller shutter mechanism itself or the belt. Inspect the belt for obstructions or damage. If the noise persists, contact customer support.

For more complex issues, consult the full instruction manual or contact HOMEPILOT customer support.

8. Specifications

9. Warranty and Support

The HOMEPILOT RolloTron Premium Wall-Mounted Shutter Winder is covered by the manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact HOMEPILOT customer service. Contact information can typically be found on the manufacturer's website or in the detailed product manual.