1. Introduction
This manual provides comprehensive instructions for the assembly, installation, operation, and maintenance of your SMIBUY SBBWC-WL001 Wall Mounted Bamboo Bathroom Cabinet. Please read this manual thoroughly before beginning assembly or use to ensure safe and correct operation. Keep this manual for future reference.

Figure 1: SMIBUY SBBWC-WL001 Wall Mounted Bamboo Bathroom Cabinet (Walnut)
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- Ensure all parts are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
- Assemble the cabinet on a soft, clean surface to prevent scratches.
- Always use appropriate tools and follow the assembly steps precisely as outlined in the instructions.
- For wall mounting, ensure the wall material is suitable for supporting the cabinet's weight and its contents. Use appropriate wall anchors for your specific wall type.
- Do not exceed the maximum weight limit of 54.43 kg (120 lbs) for the cabinet. Distribute weight evenly.
- Keep small parts and packaging materials away from children to prevent choking hazards.
3. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Cabinet Panels (Top, Bottom, Sides, Back)
- Cabinet Doors (2)
- Adjustable Shelf (1)
- Fixed Open Shelf (1)
- Hardware Pack (Screws, Dowels, Hinges, Magnet Catchers, Wall Anchors, Mounting Brackets)
- Assembly Instructions Manual
- Wall Mounting Template (Cardboard)
4. Assembly and Installation
4.1. Assembly
Follow the step-by-step illustrations provided in the included assembly guide. All parts and accessories are labeled for easy identification. Ensure all screws are tightened securely during assembly.

Figure 2: Key features including magnet catcher and handles
4.2. Wall Mounting
The cabinet is designed for wall mounting to save floor space. A laser-cut cardboard mounting template is provided to assist with precise placement of wall screws. Ensure the wall anchors used are appropriate for your wall type (e.g., drywall, stud, concrete).
- Determine the desired mounting location.
- Use the provided cardboard template to mark the exact positions for drilling holes on the wall.
- Drill pilot holes and insert appropriate wall anchors.
- Install the mounting screws into the anchors, leaving a small portion exposed for the cabinet's keyhole brackets.
- Carefully lift the cabinet and align the keyhole brackets on the back of the cabinet with the screws on the wall.
- Lower the cabinet onto the screws, ensuring it is securely seated and level.

Figure 3: Detail of the wall mounting bracket

Figure 4: Cabinet installed in a bathroom
5. Operation
5.1. Adjustable Shelves
The cabinet features one adjustable shelf inside the main compartment, offering three different height options. This allows you to customize the storage space to accommodate items of various sizes.
- To adjust the shelf, carefully remove any items from it.
- Lift the shelf slightly and pull it out from its current position.
- Reinsert the shelf into the desired set of pre-drilled holes, ensuring it is level and securely seated.

Figure 5: Adjustable shelf heights
5.2. Door Mechanism
The cabinet doors are equipped with double magnet catchers to ensure they remain securely closed when not in use. The curved handles provide an ergonomic grip for opening and closing.

Figure 6: Double magnet catcher detail
6. Care and Maintenance
To maintain the appearance and longevity of your SMIBUY bamboo cabinet, follow these care instructions:
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Moisture: While bamboo is naturally resistant to moisture, prolonged exposure to excessive humidity or standing water should be avoided. Promptly wipe away any spills.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Sunlight: Avoid placing the cabinet in direct sunlight for extended periods, as this may cause fading or discoloration over time.
7. Troubleshooting
If you encounter any issues with your cabinet, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet is wobbly after assembly. | Screws are not fully tightened. | Ensure all screws are tightened securely. |
| Doors do not align or close properly. | Hinges are not correctly installed or adjusted. | Verify hinge installation. Adjust hinges if necessary to align doors. |
| Cabinet feels insecure on the wall. | Incorrect wall anchors or improper installation. | Ensure appropriate wall anchors are used for your wall type and that the mounting screws are precisely placed and fully engaged with the cabinet's brackets. Consider using sturdier anchors if needed. |
| Missing or defective parts. | Manufacturing or packaging error. | Contact SMIBUY customer support immediately for assistance. |
8. Product Specifications

Figure 7: Product Dimensions
| Feature | Detail |
|---|---|
| Brand | SMIBUY |
| Model Number | SBBWC-WL001 |
| Color | Walnut |
| Product Dimensions (D x W x H) | 8.27"D x 23.23"W x 26.18"H (21cm D x 59cm W x 66.5cm H) |
| Material | Bamboo (Frame, Top, Handles), Engineered Wood (Back Panel) |
| Mounting Type | Wall Mount |
| Number of Shelves | 3 (1 adjustable, 1 fixed open, 1 fixed top) |
| Number of Doors | 2 |
| Weight Limit | 54.43 Kilograms (120 lbs) |
| Item Weight | 8.2 Kilograms (18.04 lbs) |
| Assembly Required | Yes |
9. Warranty and Customer Support
SMIBUY is committed to providing high-quality products and customer satisfaction. If you encounter any issues, such as receiving defective or missing parts, or require assistance with assembly or installation, please do not hesitate to contact our customer support team.
How to Contact Support:
- Send us a message through the Amazon platform.
- Refer to the contact information printed on the instruction manual included inside your product package.
We aim to provide friendly and efficient service before and after your purchase.





