Foneng BL12Black
Foneng BL12 Mobile Multimedia Bluetooth Speaker User Manual
Model: BL12Black
1. Introduction
Thank you for purchasing the Foneng BL12 Mobile Multimedia Bluetooth Speaker. This manual provides important information regarding the setup, operation, and maintenance of your new speaker. Please read this manual thoroughly before using the product to ensure proper function and to extend its lifespan.
2. Safety Information
- Do not expose the speaker to extreme temperatures, humidity, or direct sunlight.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. Refer all servicing to qualified personnel.
- Keep the speaker away from water and other liquids.
- Use only the specified charging cable and power adapter.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Dispose of the product responsibly according to local regulations.
3. Package Contents
Please check that all items are present in your package:
- Foneng BL12 Bluetooth Speaker
- USB Charging Cable
- User Manual
4. Product Overview

Figure 1: Foneng BL12 Bluetooth Speaker. The speaker features a central silver volume knob, with three control buttons (likely for play/pause, track skip) located below it on the front panel. The speaker grilles are visible on the top surface of the elongated oval design.
Components:
- Volume Knob: Located centrally on the top surface, used to adjust audio volume.
- Control Buttons: Three buttons on the front panel, typically for Power/Play/Pause, Previous Track/Volume Down, and Next Track/Volume Up. (Exact functions may vary, refer to operating section).
- Speaker Grilles: Located on the top surface, covering the audio drivers.
- Charging Port: (Location not visible in image, typically on the side or back) For connecting the USB charging cable.
5. Setup
5.1 Charging the Speaker
- Connect the small end of the USB charging cable to the charging port on the speaker.
- Connect the larger end of the USB charging cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light (if present) will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes approximately 2-3 hours.
5.2 Powering On/Off
- To Power On: Press and hold the Power button (usually the central button) for a few seconds until you hear an audible prompt or see an indicator light.
- To Power Off: Press and hold the Power button again for a few seconds until you hear an audible prompt or the indicator light turns off.
6. Operating Instructions
6.1 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode. It will typically enter pairing mode automatically upon first power-on or if no device is connected. An indicator light may flash rapidly.
- On your mobile device (smartphone, tablet, computer), enable Bluetooth.
- Search for available Bluetooth devices. The speaker will appear as "Foneng BL12" or similar.
- Select "Foneng BL12" from the list to connect.
- Once connected, the speaker will provide an audible confirmation, and the indicator light will typically stop flashing and remain solid.
- If prompted for a password, enter "0000".
6.2 Music Playback
- Play/Pause: Press the central Play/Pause button once.
- Next Track: Press the "Next Track" button (often the rightmost button) once.
- Previous Track: Press the "Previous Track" button (often the leftmost button) once.
- Volume Up: Rotate the volume knob clockwise or press and hold the "Next Track" button.
- Volume Down: Rotate the volume knob counter-clockwise or press and hold the "Previous Track" button.
6.3 Call Management
- Answer Call: Press the Play/Pause button once when an incoming call rings.
- End Call: Press the Play/Pause button once during a call.
- Reject Call: Press and hold the Play/Pause button for 2 seconds when an incoming call rings.
- Redial Last Number: Double-press the Play/Pause button.
7. Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the surface of the speaker. Do not use liquid cleaners, sprays, or solvents.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair with Bluetooth device. | Speaker not in pairing mode; Device Bluetooth off; Too far from speaker. | Ensure speaker is in pairing mode; Turn on Bluetooth on your device; Move device closer to speaker (within 10 meters). |
| No sound from speaker. | Volume too low; Speaker not connected; Incorrect audio output selected on device. | Increase speaker and device volume; Re-pair the speaker; Select the speaker as the audio output on your device. |
| Sound distortion. | Volume too high; Device too far; Interference. | Lower volume; Move device closer; Avoid strong electromagnetic interference. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Foneng |
| Model Number | BL12Black |
| Connectivity Technology | Bluetooth |
| Special Feature | Bluetooth |
| Product Dimensions (L x W x H) | 10 x 5 x 1.27 cm |
| Recommended Uses | For smartphone or tablet |
10. Warranty and Support
Foneng products are designed and manufactured to the highest quality standards. This product is covered by a limited manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Foneng website.
For technical support or customer service inquiries, please contact your retailer or the Foneng customer support team through their official channels. Please have your model number (BL12Black) and purchase details ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.


