1. Safety Information
Please observe the following safety precautions to prevent injury or damage to the device:
- Eye Protection: Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment or permanent eye damage.
- Heat: The flashlight may become warm during prolonged use, especially in high brightness modes. This is normal. Avoid direct contact with hot surfaces for extended periods.
- Children: Keep out of reach of children. This is not a toy.
- Battery Safety: Do not attempt to disassemble the built-in battery. Do not expose the device to extreme temperatures or fire.
- Water Resistance: The flashlight has an IPX4 rating, meaning it is splash-proof. Do not submerge it in water. Ensure the USB-C port cover is securely closed to maintain water resistance.
2. Package Contents
Verify that all items are present in your package:
- 1 x FITORCH V10 EDC Flashlight
- 1 x USB-C Charging Cable
- 1 x Key Ring
- 1 x User Manual (this document)
Image: The FITORCH V10 flashlight shown with its included USB-C charging cable and key ring.
3. Product Overview and Features
The FITORCH V10 is a compact and powerful EDC (Everyday Carry) flashlight designed for versatility and convenience. It features multiple lighting modes, a built-in rechargeable battery, and a magnetic tail cap.
Image: Overview of the flashlight's multifunctional features, including high brightness lamp beads, beeping warning, multi-source sidelights, USB-C charging, magnetic adsorption, and portable design.
Key Features:
- High Brightness: Up to 1000 lumens with a beam distance of up to 100 meters (328 feet).
- Multiple Light Modes: 5 main white light modes and 7 side light modes (white, warm, green, red, blue, red flash, red-blue flashing).
- 365nm UV Light: Integrated UV light for checking banknotes, fluorescent agents, and more.
- Compact and Portable: Weighs 46g and measures 2.6" x 1.3" x 0.6", with a keychain design.
- Magnetic Tail: Allows for hands-free attachment to ferrous surfaces.
- USB-C Rechargeable: Built-in 1000mAh battery with fast charging (under 2 hours).
- Durable Construction: Made from aluminum alloy and premium PC materials.
- IPX4 Water Resistance: Splash-proof for daily use.
- 80dB Beeping Alarm: For emergency situations.
4. Setup
Initial Charging:
Before first use, fully charge the flashlight. The V10 features a built-in 1000mAh rechargeable battery and a USB-C fast charging port.
- Locate the USB-C charging port on the side of the flashlight.
- Open the waterproof plug covering the port.
- Connect the provided USB-C cable to the flashlight and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- During charging, the indicator lights will show the charging status. A red light typically indicates charging, and a green light indicates a full charge.
- Charging time is approximately 120-180 minutes (2-3 hours).
- Once fully charged, disconnect the cable and securely close the waterproof plug to maintain IPX4 water resistance.
Image: The flashlight connected via USB-C cable, showing the charging indicator lights (red for charging, green for full).
5. Operating Instructions
The V10 flashlight is controlled by two buttons: the Main Light button (power symbol) and the Side Light button (lightning bolt symbol).
Main Light Operation:
Image: Diagram illustrating the 5 main light modes: Turbo, High, Medium, Low, and Economic.
- Turn ON/OFF: Double-click the Main Light button to turn on the main light. Long press the Main Light button to turn off.
- Switch Modes: Once the main light is on, click the Main Light button to cycle through the modes: High → Medium → Low → Economic.
- Turbo Mode (Main Light): Long press the Main Light button from any state (on or off) to instantly activate 1000 lumens Turbo mode. Release the button to turn off.
Image: A hand pressing the main light button to activate the 1000 lumen extreme brightness (Turbo) mode.
Side Light Operation:
Image: Diagram showing the various side light modes: White, Warm, Green, Red, Blue, Red light flash, Red & Blue strobe, and UV Light.
- Turn ON/OFF: Double-click the Side Light button to turn on the side light. Long press the Side Light button to turn off.
- Switch Modes: Once the side light is on, click the Side Light button to cycle through the modes: White → Warm → Green → Red → Blue → Red Flash → Red-Blue Flashing.
- UV Light Mode: Triple-click the Side Light button from any state (on or off) to enter UV mode.
Image: The flashlight's 365nm UV light being used to inspect banknotes, detect fluorescent agents, and for antique appraisal or treasure hunt.
Beeping Alarm Flash:
- When in danger or an emergency, long press the Side Light button to immediately activate an 80dB beeping sound and red and blue flashing lights.
Image: The flashlight emitting a loud beeping sound and flashing red and blue lights for emergency signaling.
6. Maintenance
Proper care will ensure the longevity and optimal performance of your FITORCH V10 flashlight.
- Cleaning: Wipe the flashlight with a clean, soft cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: Always ensure the USB-C port cover is securely closed when not charging to maintain the IPX4 splash-proof rating.
- Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery every 3-6 months to prevent deep discharge.
- Battery Care: The built-in battery is not user-replaceable. Do not attempt to open the flashlight.
Image: The flashlight shown with water splashes, demonstrating its IPX4 splash-proof capability.
7. Troubleshooting
If you encounter issues with your FITORCH V10, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Battery is depleted. | Charge the flashlight fully using the provided USB-C cable. |
| Light is dim or flickers. | Low battery level. | Recharge the flashlight. |
| Flashlight does not charge. | Loose cable connection or faulty power source/cable. | Ensure the USB-C cable is securely connected. Try a different USB port or power adapter. Check if the cable is damaged. |
| Buttons are unresponsive. | Temporary software glitch. | Allow the battery to fully discharge and then recharge it. This may reset the internal circuitry. |
| Water entered the device. | USB-C port cover was not closed or device was submerged. | Immediately turn off the device. Do not attempt to charge or use it. Contact customer support for assistance. |
If the problem persists after trying these solutions, please contact FITORCH customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | V10 |
| Material | Aluminum alloy, PC |
| Battery Capacity | 1000mAh (Built-in) |
| Charging Interface | USB-C |
| Charging Voltage | 4.5V-5V |
| Charging Time | 120-180 minutes |
| Max Brightness | 1000 Lumens |
| Beam Distance | 100 meters (328 feet) |
| Runtime (Brightest Mode) | Up to 3.5 hours |
| Water Resistance | IPX4 (Splash-proof) |
| Product Dimensions | 2.6" x 1.3" x 0.6" (approx. 6.6cm x 3.3cm x 1.5cm) |
| Item Weight | 46g (1.62 oz) |
| UV Light Wavelength | 365nm |
9. Warranty and Support
FITORCH products are manufactured to high quality standards. For information regarding warranty coverage and customer support, please refer to the warranty card included with your product or visit the official FITORCH website.
If you have any questions or require assistance, please contact FITORCH customer service through the retailer where you purchased the product or via the contact information provided on the official FITORCH website.
