onerbl KA12A120075035U

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

onerbl 12V AC/AC Adapter Instruction Manual

Compatible with Invisible Fence ICT-700, ICT-801, ICT-802, ICT-725, ICT-750, ICT100, ICT 100A Transmitters

1. Introduction

This manual provides essential information for the safe and effective use of your onerbl 12V AC/AC Adapter. This adapter is designed as a high-quality replacement power supply for various Invisible Fence transmitter models, including ICT-700, ICT-801, ICT-802, ICT-725, ICT-750, ICT100, and ICT 100A. It features a wide input voltage range for worldwide compatibility and incorporates multiple safety protections.

onerbl 12V AC/AC Adapter, front and side view

Figure 1: Front and side view of the onerbl 12V AC/AC Adapter. The adapter is black with a standard 2-prong US plug on one side and a cable extending from the other.

onerbl 12V AC/AC Adapter, detailed view of plug and label

Figure 2: Detailed view of the adapter showing the 2-pin plug and the product label with input specifications (AC 100-240V, 0.3A, 50/60Hz) and regulatory marks.

2. Setup

  1. Unpack the Adapter: Carefully remove the adapter from its packaging. Inspect it for any visible damage.
  2. Verify Compatibility: Ensure that your Invisible Fence transmitter requires a 12V AC/AC power supply and has a compatible input port. This adapter is specifically designed for the listed Invisible Fence models.
  3. Connect to Device: Insert the adapter's output connector securely into the power input port of your Invisible Fence transmitter.
  4. Connect to Power Outlet: Plug the adapter's 2-pin plug into a standard AC wall outlet (100-240V, 50/60Hz). Ensure the outlet is easily accessible.
onerbl 12V AC/AC Adapter plugged into a power strip

Figure 3: The onerbl 12V AC/AC Adapter plugged into a power strip, demonstrating a typical connection scenario in an office environment.

3. Operating Instructions

Once properly connected, the onerbl 12V AC/AC Adapter will provide continuous power to your compatible Invisible Fence transmitter. The adapter is designed for simple plug-and-play operation.

Safety Features

This adapter incorporates advanced safety features to protect both the adapter and your connected device:

  • Over Voltage Protection: Prevents damage from excessive voltage input.
  • Over Heat Protection: Shuts down if internal temperatures become too high.
  • Short-Circuit Protection: Safeguards against electrical shorts.
Smart chip with multiple protection icons

Figure 4: Illustration highlighting the adapter's smart chip technology, which provides short-circuit, over-voltage, and over-current protection for enhanced safety.

4. Maintenance and Care

To ensure the longevity and optimal performance of your onerbl AC/AC Adapter, follow these maintenance guidelines:

  • Keep Dry: Avoid exposing the adapter to moisture, water, or high humidity.
  • Temperature Control: Do not operate the adapter in extremely hot or cold environments. Store it in a moderate temperature range.
  • Inspect Cable: Regularly check the power cord and connector for any signs of fraying, cuts, or damage. If damage is observed, discontinue use immediately.
  • Cleanliness: Keep the adapter free from dust and debris. Use a dry, soft cloth for cleaning.
  • Unplug When Not in Use: For extended periods of non-use, unplug the adapter from both the wall outlet and the device.
Durable design with copper wire and PVC jacket diagram

Figure 5: Diagram illustrating the durable construction of the adapter's cable, featuring a PVC jacket and copper wire for reliable power transmission and longevity.

5. Troubleshooting

If you encounter issues with your adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Device not receiving power
  • Adapter not fully plugged in.
  • Wall outlet is not functioning.
  • Device's power input port is damaged.
  • Adapter is faulty.
  • Ensure adapter is securely plugged into both the device and the wall outlet.
  • Test the wall outlet with another device.
  • Check the device's power port for damage.
  • If all else fails, the adapter may need replacement.
Adapter feels excessively hot
  • Normal operation (some warmth is expected).
  • Overload or internal fault.
  • Poor ventilation.
  • If it's just warm, it's likely normal.
  • If it's extremely hot to the touch, unplug immediately and discontinue use. Ensure adequate ventilation around the adapter.
Device functions intermittently
  • Loose connection.
  • Damaged cable or connector.
  • Check all connections for tightness.
  • Inspect the cable and connector for any visible damage. Replace if damaged.

6. Specifications

  • Brand: onerbl
  • Input: AC 100-240V, 50/60Hz
  • Output: 12 Volts AC
  • Special Feature: Travel-friendly design
  • Power Source: Corded Electric
  • Main Power Connector Type: 2 Pin (US standard)
  • Cable Length: Approximately 76 inches (6.33 feet)
  • Protection Features: Over Voltage Protection, Over Heat Protection, Short-Circuit Protection
  • Manufacturer: Shenzhen Waweis Technology Co., Ltd
onerbl 12V AC/AC Adapter dimensions and cable length

Figure 6: Visual representation of the adapter's approximate dimensions (1.6 x 2.6 x 1.2 inches) and cable length (76 inches).

7. Warranty and Support

This onerbl 12V AC/AC Adapter is manufactured to high-quality standards and undergoes testing to ensure great working condition. For any questions, technical assistance, or warranty inquiries, please contact the seller directly through your purchase platform. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.