Prichor Universal Smart WiFi Ceiling Fan Remote Control Kit Instruction Manual

1. Introduction

This Prichor Universal Smart WiFi Ceiling Fan Remote Control Kit is designed to enhance your comfort and convenience by providing versatile control over your ceiling fan and its integrated light. The kit includes a remote control and a receiver, offering functions such as separate fan and light control, three fan speeds, light dimming, and timing options. Additionally, it supports smart control via the Smart Life App and voice commands through Amazon Alexa and Google Assistant.

This manual provides detailed instructions for proper installation, setup, and operation to ensure optimal performance and safety.

2. Safety Information

• Always turn off power at the circuit breaker before installing or servicing the fan control kit.
• Installation should be performed by a qualified electrician or a person with adequate electrical knowledge.
• Ensure all wiring connections are secure and comply with local electrical codes.
• Do not use this product with incompatible fan types or electrical loads.
• The remote control requires 2 CR2032 batteries (not included). Ensure correct polarity when inserting batteries.

3. Package Contents

Verify that all items are present in your package:

• 1 x Smart Wall Control (Remote Control)
• 1 x Receiver Unit
• Wire Nuts
• Mounting Screws and Anchors
• Instruction Manual

Image: Contents of the Prichor Smart WiFi Ceiling Fan Remote Control Kit, including the wall control, receiver, and installation hardware.

4. Installation Instructions

4.1 Pre-Installation Notes

• If your ceiling fan has pull chains for speed and light control, ensure they are set to the highest speed and the light is turned ON before installing the receiver. This allows the wireless remote control to function correctly.

4.2 Wiring the Receiver

1. Turn off the main power to the ceiling fan at the circuit breaker.
2. Disconnect the existing ceiling fan wiring.
3. Connect the receiver according to the wiring diagram provided. Match the colors of the wires from the receiver to the corresponding wires from the ceiling fan and the household electrical supply. Use the included wire nuts to secure connections.
• AC 110-120V 60HZ (Household Supply) to Receiver (Red & White)
• Receiver (Blue & Black) to Fan (Light & Fan Motor)
4. Carefully tuck all wires and the receiver into the fan canopy.
5. Restore power at the circuit breaker.

Image: Step-by-step visual guide for connecting the receiver unit to the ceiling fan and household electrical wiring.

4.3 Remote Control Pairing (Learn Function)

The remote control and receiver need to be paired for proper operation. This process is typically done during installation.

1. Ensure the receiver is correctly installed and power is restored to the fan.
2. Open the battery slot on the remote control and insert 2 CR2032 batteries (not included).
3. On the back of the remote control, locate the 'LEARN' button.
4. Press and hold the 'LEARN' button for approximately 4 seconds until the fan light flashes. This indicates successful pairing.

Image: Illustration showing the battery installation and the location of the 'LEARN' button on the remote control for pairing.

5. Operating Instructions

5.1 Remote Control Functions

The remote control provides direct access to all fan and light functions:

• Fan On/Off: Press the power button to turn the fan on or off.
• Light On/Off/Dimmer: Press the light button to turn the light on or off. Press and hold the light button to adjust brightness (dimming function).
• Fan Speed Control: Separate buttons for Low, Medium, and High fan speeds.
• Timing Function: Set the fan to turn off automatically after 2 hours, 4 hours, or 8 hours.

Image: Front and back view of the remote control, highlighting each button and its corresponding function for fan speed, light, and timing.

5.2 Smart App Control (Smart Life App)

The kit is compatible with the Smart Life App for iOS and Android devices, allowing for advanced control and automation.

1. Download and install the "Smart Life" app from your device's app store.
2. Open the app and register or log in to your account.
3. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network. 5GHz or 5.8GHz networks are not supported for initial device connection.
4. Turn on Bluetooth on your mobile device.
5. In the Smart Life App, click the "+" icon to add a device.
6. The app may automatically search for nearby devices. If not, navigate to "Small Home Appliances" and select "Fan (BLE)".
7. To put the fan control into pairing mode, turn off the ceiling fan power for 5 seconds (using the wall switch or circuit breaker, not the remote), then turn it back on. Immediately press and hold the power button on the wall control for 5 seconds. The fan light will flash twice, indicating it is in network distribution mode.
8. Once the device is discovered in the app, click "Add" and follow the on-screen prompts to connect to your Wi-Fi network.
9. After successful connection, you can control the fan and light, adjust brightness, and set schedules directly from the app.

Video: A demonstration of connecting the Prichor Smart Ceiling Fan Remote Control Kit to the Smart Life App, including steps for network pairing and initial setup.

Image: Visual representation of the Smart Life App interface, showing controls for fan speed, light brightness, and color temperature.

5.3 Voice Control (Alexa & Google Assistant)

Once connected to the Smart Life App, you can link your account to Amazon Alexa or Google Assistant for voice control.

1. Open the Alexa or Google Home app on your mobile device.
2. Navigate to the "Skills" or "Works with Google" section.
3. Search for "Smart Life" and enable the skill/service.
4. Link your Smart Life account when prompted.
5. Discover devices. Your ceiling fan control should now appear.

Example voice commands:

• "Alexa, turn bedroom ceiling fan to 3."
• "Hey Google, dim the light to 80 percent."

Image: Depiction of users interacting with voice assistants (Alexa, Google Assistant) to control the ceiling fan and light.

6. Compatibility

This universal ceiling fan remote control kit is compatible with most standard ceiling fans and various lamp types:

• Halogen & Incandescent lamps: Up to 4.2A/500W Max
• Dimmable CFL: Up to 1.5A/150W Max
• Dimmable LED: Up to 1.5A/150W Max

Note: Some LED and CFL lamps are not dimmable and will only support ON and OFF functions.

Works well with many well-known ceiling fan brands, including Hunter, Harbor Breeze, Hampton Bay, Westinghouse, and others.

Image: A visual guide illustrating the compatibility of the control kit with various lamp types (Halogen, Incandescent, Dimmable CFL, Dimmable LED) and common ceiling fan brands.

7. Troubleshooting

• Device not connecting to Smart Life App: Ensure your router is broadcasting a 2.4GHz Wi-Fi network. The device does not support 5GHz or 5.8GHz networks for initial setup. Verify Bluetooth is enabled on your phone.
• Remote control not responding: Check if the batteries in the remote control are correctly inserted and have sufficient charge. Ensure the remote and receiver are properly paired using the 'LEARN' function.
• Fan or light not working after installation: Double-check all wiring connections according to the diagram. Ensure the main power to the fan is on. If your fan has pull chains, confirm they are set to the highest speed and the light is on.
• Humming noise from fan: Some fan motors may produce a slight hum with certain control units. This can sometimes be related to compatibility with older fan models or specific motor types.

8. Specifications

• Product Dimensions: 2.76 x 0.6 x 4.57 inches
• Item Weight: 5.9 ounces
• Item Model Number: RC-T26 & RC-26SR
• Batteries: 2 CR2032 batteries required (for remote)
• Max Number of Supported Devices: 10 (via app)
• Special Features: 3 speed, Compatible with Alexa, Google Assistant and Smart Life App, Universal, light dimmer, timer
• Color: Black
• Manufacturer: Prichor
• First Available: May 11, 2023

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Prichor website. Keep your purchase receipt for warranty claims.