1. Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the room divider on a flat, stable surface to prevent tipping.
- Do not allow children to climb on or play with the room divider.
- Periodically check all connections and fasteners to ensure they remain tight and secure.
- Avoid placing the room divider in high-traffic areas where it could be easily knocked over.
2. Package Contents
Verify that all components listed below are included in your package:
- 4 x Fabric Panels (210D Oxford cloth)
- Steel Frame Components (various rods and connectors)
- Support Feet (extended design for stability)
- Assembly Hardware (screws, bolts, Allen wrench if applicable)
- Instruction Manual (this document)
Image: The JAXSUNNY 4-panel room divider, showcasing its black fabric panels and steel frame.
3. Setup and Assembly
Assembly of the JAXSUNNY Room Divider is designed to be straightforward. A detailed manual with diagrams is included in your package. It is recommended that two people assist with assembly for ease and stability.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the package contents list and the diagrams in the included assembly manual.
- Assemble Frame Sections: Connect the steel frame rods according to the provided diagrams. Ensure all connections are firm and secure. Some connections may require gentle force or a rubber mallet to ensure a snug fit.
- Attach Fabric Panels: Slide the 210D Oxford cloth panels onto the designated frame sections. Ensure the fabric is taut and evenly distributed.
- Install Support Feet: Attach the extended support feet to the bottom of each panel's frame. These feet are crucial for the divider's stability. Ensure they are securely fastened and flat on the ground.
- Final Check: Once assembled, gently test the stability of the room divider. Ensure all screws and connections are tightened.
Image: Detail showing the upgraded stability features of the room divider's feet, designed to prevent tipping.
4. Operating Instructions
The JAXSUNNY Room Divider offers versatile configurations to suit your needs.
- Adjusting Angles: The 4 panels are connected to allow for flexible adjustment. You can configure the divider into various shapes such as C-shape, W-shape, or L-shape to best fit your space and privacy requirements. Adjusting the angle of the panels can also enhance overall stability.
- Folding for Storage: When not in use, the room divider can be folded flat. This compact design allows for easy storage in a corner or against a wall, minimizing the space it occupies.
Image: A visual guide demonstrating how the room divider can be adjusted to different angles and folded for compact storage.
Image: The room divider shown folded flat, illustrating its space-saving storage capability.
Image: Examples of the room divider's application in different scenarios, including a bedroom, living room, and study, highlighting its versatility.
5. Maintenance
Proper care will ensure the longevity of your JAXSUNNY Room Divider.
- Cleaning Fabric Panels: The 210D Oxford cloth panels are designed to be removable for easy cleaning. It is recommended to wipe the fabric with a dry cloth to remove dust and light dirt. For more stubborn stains, a damp cloth with mild soap can be used, followed by drying thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Cleaning Steel Frame: Wipe the steel frame with a dry cloth to remove dust. If necessary, a slightly damp cloth can be used, ensuring the frame is dried immediately to prevent rust.
- Regular Inspection: Periodically inspect the frame and fabric for any signs of wear or damage. Ensure all connections remain tight.
6. Troubleshooting
If you encounter any issues with your room divider, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Divider is unstable or wobbly. | Loose connections; uneven surface; feet not properly installed. | Ensure all screws and connections are tightened. Place the divider on a flat, level surface. Verify that the support feet are fully extended and securely attached. Adjust panel angles for better balance. |
| Difficulty assembling parts. | Parts misaligned; manufacturing tolerance. | Refer to the detailed assembly manual. Ensure parts are oriented correctly. Apply gentle, even pressure. If a part seems too tight, double-check the part number and orientation. Contact customer support if parts do not fit. |
| Fabric panels appear loose or saggy. | Panels not fully stretched over frame; incorrect installation. | Ensure the fabric is fully sleeved over the frame tubes and pulled taut. Re-adjust if necessary. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 63"W x 71.3"H (fully expanded) |
| Brand | JAXSUNNY |
| Style | Modern |
| Color | Black |
| Number of Panels | 4 |
| Material | Alloy Steel, Iron, 210D Oxford Cloth |
| Recommended Uses | Partition, Privacy |
| Special Feature | Foldable |
| Mounting Type | Freestanding (Note: Product data may list 'Wall Mount' but this is a freestanding unit.) |
| Pattern | Solid |
| Product Care Instructions | Wipe with Dry Cloth |
| ASIN | B0C4NCT3DK |
Image: Technical drawing showing the dimensions of the JAXSUNNY room divider, including height and width.
8. Warranty and Support
For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the manufacturer's official website or contact JAXSUNNY customer service directly. Contact details are typically found on the product packaging or the brand's online presence.