1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Tribesigns DINGTABLE0170 Industrial Dining Table. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.
Image 1.1: The Tribesigns DINGTABLE0170 Industrial Dining Table.
2. Safety Information
- Two-Person Assembly Recommended: Due to the weight and size of the table components, assembly by two individuals is strongly recommended to prevent injury and ensure proper handling.
- Secure All Fasteners: Ensure all screws and bolts are tightened securely before using the table. Periodically check and re-tighten fasteners as needed.
- Level Surface: Always place the table on a flat, stable, and level surface. Utilize the adjustable feet pads to stabilize the table on uneven floors.
- Weight Capacity: Do not exceed the maximum weight recommendation of 200 kilograms (approximately 440 lbs) to avoid damage or injury.
- Edge Protection: The table corners may be sharp. Consider using corner protectors, especially in households with children.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop sections (Engineered Wood)
- Metal Frame Legs (2 units)
- Crossbars/Support Beams
- Adjustable Feet Pads
- Assembly Hardware (screws, bolts, washers, Allen wrench)
- Instruction Manual
4. Setup and Assembly
Assembly typically requires two people and a screwdriver. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Crossbars to Legs: Connect the horizontal crossbars to the vertical metal frame legs using the provided hardware. Ensure all connections are finger-tightened initially.
- Secure Tabletop Sections: Place the tabletop sections upside down on a protective surface. Align the assembled leg frames with the pre-drilled holes on the underside of the tabletop.
- Fasten Tabletop: Secure the tabletop to the frame using the remaining screws and bolts. Tighten all fasteners completely with the provided Allen wrench and a screwdriver.
- Install Adjustable Feet Pads: Screw the adjustable feet pads into the bottom of each metal leg.
- Upright the Table: With assistance, carefully flip the table upright.
- Level the Table: Adjust the feet pads as necessary to ensure the table is stable and does not wobble.
Image 4.1: Key structural features including the 0.59-inch thick tabletop, 1.97x1.97 inch strong metal frame, and adjustable feet pads.
5. Operating Instructions
Your Tribesigns Industrial Dining Table is designed for versatile use in various indoor settings.
- Dining: The 63x31.5 inch surface comfortably accommodates 4-6 people for meals.
- Workspace: Its sturdy construction and ample surface area make it suitable for use as a desk, crafting table, or general workspace.
- Event Surface: Ideal for gatherings, game nights, or as a display surface.
Image 5.1: The dining table arranged for a family meal, demonstrating seating capacity.
Image 5.2: The dining table paired with a bench and chairs, showcasing flexible seating options.
6. Maintenance
To maintain the appearance and extend the life of your dining table, follow these care guidelines:
- Cleaning: Wipe the tabletop and metal frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Although the tabletop is stain-resistant, promptly wipe up any spills to prevent potential staining or damage.
- Heat Protection: Always use coasters or placemats under hot dishes to protect the tabletop surface from heat damage.
- Avoid Scratches: Use protective pads under objects that may scratch the surface, such as decorative items or laptops.
- Regular Inspection: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary.
Image 6.1: Detailed view of the tabletop material, highlighting its texture and finish.
7. Troubleshooting
- Wobbly Table: If the table feels unstable, adjust the individual feet pads on the bottom of each leg until the table is level and firm.
- Loose Connections: If any part of the table feels loose, re-tighten all assembly screws and bolts. Avoid overtightening.
- Scratches on Surface: Minor scratches on the engineered wood surface can sometimes be minimized with wood repair markers or polishes. For deeper scratches, professional repair may be required.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Tribesigns |
| Model Number | DINGTABLE0170 |
| Product Dimensions (D x W x H) | 31.5"D x 63"W x 29.5"H |
| Item Weight | 25.5 Kilograms (approx. 56.2 lbs) |
| Maximum Weight Recommendation | 200 Kilograms (approx. 440 lbs) |
| Frame Material | Metal |
| Top Material Type | Engineered Wood |
| Color | Brown (Vintage Brown) |
| Tabletop Thickness | 0.59 Inches |
| Seating Capacity | 6 |
| Indoor/Outdoor Usage | Indoor |
| Is Stain Resistant | Yes |
| Recommended Number of People for Assembly | 2 |
| Tools Recommended For Assembly | Screw Driver, Wrench |
Image 8.1: Dimensional overview of the dining table.
9. Warranty and Support
Your Tribesigns DINGTABLE0170 Industrial Dining Table comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your product packaging or contact Tribesigns customer service directly.
For technical support, missing parts, or any other inquiries, please contact Tribesigns customer service through the retailer where the product was purchased or visit the official Tribesigns website for contact information.
