PATPET P Collar 910 Charging Set User Manual

Introduction

This user manual provides essential information for the proper use and maintenance of your PATPET Replacement Charging Set for the P Collar 910. This set includes a USB charging cable and a wall adapter, designed specifically for the PATPET P Collar 910 electronic training collar system. Please read this manual thoroughly before use to ensure optimal performance and longevity of your charging set.

Package Contents

Verify that all items listed below are present in your package:

• 1 x USB Charging Cable (Type-C interface)
• 1 x Wall Adapter

Image: The PATPET P Collar 910 Charging Set, showing the included USB charging cable and the wall adapter. These are the primary components for recharging your P Collar 910 device.

Setup

1. Connect the USB Cable: Insert the Type-C end of the USB charging cable into the charging port of your PATPET P Collar 910 device (either the remote transmitter or the receiver collar).
2. Connect to Wall Adapter: Insert the standard USB-A end of the charging cable into the USB port on the provided wall adapter.
3. Plug into Power Outlet: Plug the wall adapter into a standard electrical wall outlet.
4. Charging Indication: The device (P Collar 910) will typically show an indicator light or display to confirm it is charging. Refer to your P Collar 910's specific user manual for details on its charging indicators.

Image: The PATPET P Collar 910 remote transmitter and receiver collar, demonstrating how they are connected to the charging set for recharging. The remote is shown plugged into the wall adapter via the USB cable.

Operating Instructions

The PATPET Charging Set is designed for straightforward operation. Once connected as described in the "Setup" section, the charging process begins automatically.

• Charging Time: Charging times may vary depending on the battery level of your P Collar 910 device. Refer to the P Collar 910 manual for estimated full charge times.
• Overcharge Protection: The P Collar 910 devices are designed with overcharge protection. However, it is generally recommended to disconnect the charger once the device is fully charged to conserve energy.
• Compatibility: This charging set is exclusively designed for the PATPET P Collar 910. Do not attempt to use it with other devices, as this may cause damage to the charger or the device.

Maintenance

• Cleaning: Wipe the charging cable and adapter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: Store the charging set in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Handling: Avoid bending or twisting the cable excessively, as this can damage the internal wires. Do not pull the cable by the cord when disconnecting; always grasp the plug.
• Inspection: Periodically inspect the cable and adapter for any signs of damage, such as frayed wires, cracked casing, or bent pins. Discontinue use immediately if damage is observed.

Troubleshooting

Specifications

Warranty and Support

PATPET products are manufactured to high quality standards. For information regarding warranty coverage, technical support, or customer service, please refer to the warranty card included with your original P Collar 910 purchase or visit the official PATPET website. Please have your product model number (DC910D) and purchase information ready when contacting support.

Note: This charging set is a replacement part. Warranty terms for replacement parts may differ from original product warranties.