LOVELEDI P58D 40000mAh Power Bank Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your LOVELEDI P58D 40000mAh Power Bank. Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

WARNING:

• Do not drop, disassemble, or attempt to repair the device yourself.
• Avoid exposure to fire, extreme temperatures (above 50°C), or direct sunlight.
• Keep out of reach of children.
• Do not expose to water or other liquids.
• Ensure proper ventilation during charging to prevent overheating.
• If the power bank swells or liquid leakage occurs, discontinue use immediately.
• Do not direct the flashlight beam into eyes.

The power bank is equipped with a PCB motherboard featuring 10 safety protection designs, including overcharging, over-discharging, short circuit, overheating, over-power, over-voltage, and magnetic field protection, ensuring safe operation.

Figure 2.1: Comprehensive internal protection system of the power bank.

3. Product Overview

The LOVELEDI P58D Power Bank is designed for portability and high-capacity charging. It features multiple output ports and an integrated LED display for convenience.

Figure 3.1: Front view of the LOVELEDI P58D Power Bank.

3.1 Components:

• USB-A Output Ports (x2): For charging various USB-compatible devices.
• Type-C Port (Input/Output): Supports both charging the power bank and charging devices with PD30W fast charge.
• LED Digital Display: Shows the remaining battery percentage and charging status.
• Power Button: Activates the display and controls the flashlight.
• Built-in Flashlight: Provides illumination for emergencies.

4. Setup

4.1 Initial Charging of the Power Bank:

Before first use, it is recommended to fully charge your power bank. This ensures optimal performance and battery longevity.

1. Connect the power bank's Type-C input port to a compatible power adapter (PD30W adapter recommended for fastest charging).
2. The LED screen will display numbers flashing, indicating charging in progress.
3. When the display shows 100%, the power bank is fully charged.

Figure 4.1: Recharging the power bank. A full charge takes approximately 6 hours with a PD30W adapter.

5. Operating Instructions

5.1 Charging Your Devices:

The power bank automatically detects and identifies the connected device to provide optimal charging. It supports simultaneous charging of up to three devices.

1. Connect your device's charging cable to one of the power bank's output ports (USB-A or Type-C).
2. The power bank will automatically begin charging your device. The LED display will show the remaining power.
3. For fast charging, use the Type-C port with a compatible cable and device. It can charge an iPhone 13 from 20% to 80% in approximately 30 minutes.

Figure 5.1: Charging a single device with the power bank.

Figure 5.2: Simultaneous charging of multiple devices. Note: Fast charging mode may be reduced when charging multiple devices.

5.2 LED Display Operation:

• Short Press Power Button: Displays the remaining power percentage on the LED screen. A lightning bolt icon will appear if fast charging is active.
• Quick Double Press Power Button: Turns off the LED display.

Figure 5.3: The LED digital display showing battery percentage.

5.3 Flashlight Operation:

• Long Press Power Button (approx. 4 seconds): Turns the flashlight ON/OFF.
• Short Press Power Button (while flashlight is ON): Cycles through different modes: Super Bright, Soft Bright, SOS Beacon, Strobe.

Figure 5.4: Activating the built-in flashlight.

6. Maintenance

• Clean the power bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.
• To maintain battery health, fully charge and discharge the power bank at least once every three months if not in regular use.

7. Troubleshooting

8. Specifications

• Model: P58D
• Battery Capacity: 40000mAh
• Battery Type: Rechargeable Polymer Li-ion Cell
• Input (Type-C): 5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 20V=1.5A (PD30W)
• Output (USB-A1): 5V=3A, 9V=2A, 12V=1.5A, 4.5V=5A, 5V=4.5A (22.5W Max)
• Output (USB-A2): 5V=3A, 9V=2A, 12V=1.5A, 4.5V=5A, 5V=4.5A (22.5W Max)
• Output (Type-C): 5V=3A, 9V=3A, 12V=2.5A, 15V=2A, 20V=1.5A (PD30W)
• LED Flashlight Power: 3W (360 Lumens)
• Charging Time: About 6 hours (using PD30W adapter)
• Working Temperature: 0°C-50°C
• Product Dimensions: 5.75 x 2.87 x 1.22 inches (146 x 73 x 31.5mm)
• Product Weight: 1 pound (417g)

9. Warranty and Support

LOVELEDI products come with a standard manufacturer's warranty. For detailed warranty information, product support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official LOVELEDI website.

For any questions or assistance, please contact our customer support team. We are committed to providing high-quality products and excellent service.