YIQU silver80-3pk

YIQU 3 Pack Blue Fairy Lights with Remote Control and Timer

Model: silver80-3pk

Introduction

Thank you for choosing the YIQU 3 Pack Blue Fairy Lights. This product features 26 feet of wire with 80 blue LEDs per string, powered by batteries and controlled via an included remote. Designed for both indoor and outdoor use, these lights offer multiple lighting modes and a timer function to enhance your decorative needs. Please read this manual carefully before use to ensure proper operation and longevity of your lights.

YIQU 3 Pack Blue Fairy Lights, showing the coiled string lights and remote control.

Image: YIQU 3 Pack Blue Fairy Lights, illustrating the product packaging and components.

What's in the Box

Your package should contain the following items:

  • 3 x 26 FT 80 LED Blue Fairy Light Strings (each with a battery box)
  • 1 x Remote Control

Setup

1. Battery Installation

Each fairy light string requires 3 AA batteries (not included). To install:

  1. Locate the battery box on each string light.
  2. Open the battery compartment cover.
  3. Insert 3 AA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Close-up of the battery box for the YIQU fairy lights, showing where to insert AA batteries.

Image: Battery box detail, showing battery insertion area.

2. Placement and Arrangement

The flexible silver wire allows for easy shaping and placement. You can wrap the lights around objects, drape them, or arrange them as desired. For outdoor use, ensure the battery box is protected from direct water exposure.

Waterproof LED wire of the YIQU fairy lights, highlighting its durability against sun, water, snow, and wind.

Image: Waterproof LED wire, demonstrating its suitability for various environments.

Operating Instructions

Using the Remote Control

The included remote control allows you to manage the lights conveniently. Ensure the remote has a clear line of sight to the battery box for optimal performance.

Remote control for YIQU fairy lights, showing buttons for power, timer, modes, and brightness adjustment.

Image: Remote control layout with function buttons.

  • ON/OFF: Press to turn the lights on or off.
  • TIMER: Activates the 6-hour ON, 18-hour OFF cycle. The lights will automatically turn on for 6 hours and then off for 18 hours, repeating daily.
  • MODE 1-8: Selects one of the 8 lighting modes:
Mode NumberDescription
1Combination
2In Wave
3Sequential
4Slo Glo
5Chasing/Flash
6Slow Fade
7Twinkle/Flash
8Steady On
  • DIM +/-: Adjusts the brightness level (10 levels available).

Manual Control (on Battery Box)

A button on the battery box allows for basic control if the remote is unavailable:

  • Press the button to cycle through the 8 lighting modes.
  • Press and hold the button to turn the lights off.

Maintenance

  • Cleaning: Gently wipe the lights and battery box with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Battery Replacement: Replace all 3 AA batteries when the lights dim or stop working. Always use new batteries of the same type.
  • Storage: When not in use for extended periods, remove batteries from the battery box to prevent leakage. Store the lights in a cool, dry place, away from direct sunlight. Carefully coil the string lights to prevent tangling.

Troubleshooting

ProblemPossible CauseSolution
Lights do not turn on.Batteries are dead or incorrectly installed.Replace batteries with new ones, ensuring correct polarity.
Remote control is not working.Remote battery is dead or remote is too far/blocked.Ensure remote battery is functional. Move closer to the battery box and ensure no obstructions.
Lights are dim.Batteries are low.Replace batteries.
Timer function not activating.Timer button not pressed or power interrupted.Ensure the TIMER button on the remote was pressed. If power was interrupted (e.g., batteries removed), reset the timer.

Specifications

FeatureDetail
Model Numbersilver80-3pk
Light ColorBlue
Number of LED Lights80 per string
String Length26 feet per string
Power Source3 x AA Batteries (per string, not included)
Control MethodRemote Control, Button Control on Battery Box
Special FeaturesRemote Controlled, Timer (6H ON/18H OFF), Twinkling, 8 Lighting Modes, 10 Brightness Levels
Indoor/Outdoor UsageIndoor/Outdoor (Battery box needs protection from water outdoors)
MaterialPlastic, Silver-coated Copper Wire
Item Weight5.9 ounces (total for 3 pack)

Safety Information

  • The lights operate on very low voltage (3 x AA batteries), making them safe to touch for both adults and children.
  • When using outdoors, ensure the battery case is protected from direct water or heavy rain to prevent damage.
  • Do not attempt to modify or disassemble the light strings or battery box.
  • Keep batteries out of reach of small children.
YIQU fairy lights decorating a potted plant and a small fairy figurine, illustrating safe usage.

Image: Fairy lights used safely in decorative settings.

Warranty and Support

YIQU values customer satisfaction. If you encounter any manufacturing defects with your battery-operated lights, please contact our customer service team. We are committed to assisting you within 24 hours. For support, please refer to your purchase platform or the YIQU official store for contact information.

Typical return policy allows for refund/replacement within 30 days of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.