Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your SIBRILLE LED Floor Lamp. Please read this manual thoroughly before use to ensure proper function and safety.
Safety Information
- Ensure the power supply voltage matches the lamp's requirements (100-240V AC, 50/60Hz).
- Do not disassemble or modify the lamp.
- Keep the lamp away from water and high humidity environments. This product is not waterproof.
- Do not look directly into the LED light source for extended periods.
- Unplug the lamp from the power outlet before cleaning or performing any maintenance.
- The LED bulbs are non-replaceable. Do not attempt to replace them.
Package Contents
Please verify that all components are present:
- LED Floor Lamp (main body with 3 rotatable lights)
- Lamp Base
- Remote Control (Note: AAA batteries are not included for the remote control.)
- User Manual
Assembly Instructions
The SIBRILLE LED Floor Lamp is designed for quick and easy assembly, typically within 5 minutes, with no tools required.
- Carefully unpack all components from the packaging.
- Attach the lamp pole sections by screwing them clockwise until secure.
- Screw the assembled lamp pole into the lamp base firmly.
- Ensure all connections are tight and stable before plugging the lamp into a power outlet.
Figure 1: Fully assembled SIBRILLE LED Floor Lamp with its remote control.
Video 1: Demonstration of the easy assembly process for the LED Floor Lamp.
Operating Instructions
Powering On/Off
Plug the lamp into a standard electrical outlet. The lamp can be turned on or off using either the touch control on the lamp pole or the remote control.
Remote Control Functions
The included remote control allows for convenient adjustment of the lamp's settings from a distance of up to 50 feet. Ensure AAA batteries are installed in the remote control.
- ON/OFF Button: Powers the lamp on or off.
- Brightness +/-: Adjusts the brightness level from 5% to 100%.
- Color Temperature +/-: Cycles through 4 color temperatures: 2700K (Warm White), 4000K (Natural White), 5000K (Cool White), and 6500K (Daylight White).
- Individual Light Control (1, 2, 3 buttons): Each of the three rotatable lights can be turned on/off independently.
- Reading Mode: Sets the lamp to an optimized brightness and color temperature for reading.
- Sleeping Mode (Night Mode): Activates a softer, lower light setting suitable for sleeping or relaxation.
- 1H Timer: Sets the lamp to automatically turn off after 1 hour.
- One Click Recovery (M button): Restores the lamp to a default or previously saved setting.
Figure 2: Detailed functions of the remote control for the SIBRILLE LED Floor Lamp.
Video 2: Overview of the 36W Modern Floor Lamp with Remote Control features.
Touch Control Functions
The lamp pole features touch-sensitive controls for direct adjustments:
- Short Press: Cycles through color temperatures (2700K - 4000K - 5000K - 6500K - OFF).
- Long Press: Activates continuously adjustable brightness (stepless dimming) from 5% to 100%.
Figure 3: Illustration of both touch control and remote control functionalities.
Adjustable Lamp Heads
Each of the three lamp heads can be independently adjusted to direct light precisely where needed:
- 350° Rotation: Each lamp head can rotate horizontally up to 350 degrees.
- 180° Tilt: Each lamp head can tilt vertically up to 180 degrees (up/down).
Figure 4: Demonstration of the flexible and adjustable lamp heads.
Memory Function
The lamp features a memory function that remembers your last used brightness and color temperature settings when turned off and on again.
Versatile Applications
Video 3: Examples of the lamp's wide application in various room settings.
Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The integrated LED bulbs are designed for long service life (approximately 50,000 hours) and are non-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; power outlet issue; loose connection. | Ensure the power cord is securely plugged into a working outlet. Check all lamp pole connections. |
| Remote control not working. | Batteries are dead or not installed; remote out of range; signal obstruction. | Install 2 AAA batteries (not included) or replace existing ones. Ensure remote is within 50 feet and has a clear line of sight to the lamp. |
| Light flickers or is unstable. | Loose connection; power fluctuation. | Check all connections. Try plugging the lamp into a different outlet. If the problem persists, contact customer support. |
| Cannot change color temperature or brightness. | Remote control issue (see above); touch control not responding. | Ensure remote batteries are fresh. For touch control, ensure your finger makes full contact with the sensor. |
Specifications
| Feature | Detail |
|---|---|
| Model | FLH-036-F2 |
| Wattage | 36W LED (equivalent to 360W incandescent) |
| Luminous Flux | Up to 2500 Lumens |
| Color Temperatures | 2700K, 4000K, 5000K, 6500K |
| Brightness Adjustment | Stepless Dimmable (5% - 100%) |
| Control Method | Remote Control & Touch Control |
| Power Source | Corded Electric |
| Voltage | 100-240V AC |
| Material | Plastic, Metal (Iron) |
| Product Dimensions | 17.2"D x 13.19"W x 67"H (approx. 43.7cm D x 33.5cm W x 170cm H) |
| Item Weight | 9.26 pounds (approx. 4.2 kg) |
| Average Life | 50,000 Hours |
| Special Features | Adjustable Light Head, Dimmable, Individual Control, Memory Function, Timer |
Figure 5: Detailed dimensions and electrical specifications of the lamp.
Warranty and Support
SIBRILLE offers a 2-year quality warranty for this LED Floor Lamp. We also provide a 30-day return policy for your satisfaction.
For any problems, suggestions, or support inquiries, please contact SIBRILLE customer service via Amazon. We are committed to providing prompt assistance and ensuring your satisfaction.
