1. Product Overview
The Accutime Disney Stitch Kids Digital Watch (Model LAS4040AZ) is a digital timepiece featuring a touch-activated LED display and a decorative crystal bezel. It is designed for children and features a comfortable PU leather strap with a buckle clasp.
Figure 1: Front view of the Disney Stitch Kids Digital Watch.
Key Features:
- Touch-activated LED display for time viewing.
- Glittering crystal bezel for aesthetic appeal.
- Starry PU leather strap for comfort and style.
- Adjustable strap to fit wrist sizes from 5.5" to 8".
- Durable design suitable for daily wear.
2. Setup and Initial Configuration
2.1 Unboxing
Carefully remove the watch from its packaging. Ensure all protective films are removed from the watch face and strap.
Figure 2: Watch in its packaging.
2.2 Setting Time and Date
The watch features a single touch-sensitive area on the display for all settings. Due to its sensitivity, precise and gentle touches are required.
- Activate Display: Gently tap the center of the watch face once to activate the LED display and show the current time.
- Enter Setting Mode: After the time is displayed, immediately press and hold the center of the watch face for approximately 3-5 seconds until the hour digits begin to flash.
- Set Hour: While the hour digits are flashing, tap the watch face repeatedly to advance the hour. Each tap will increase the hour by one. Ensure you tap gently and deliberately.
- Set Minute: Once the correct hour is set, press and hold the watch face again for 3-5 seconds until the minute digits begin to flash. Tap repeatedly to advance the minutes.
- Set Month: After setting the minutes, press and hold the watch face for 3-5 seconds until the month digits flash. Tap repeatedly to set the correct month.
- Set Day: After setting the month, press and hold the watch face for 3-5 seconds until the day digits flash. Tap repeatedly to set the correct day.
- Exit Setting Mode: After setting the day, press and hold the watch face for 3-5 seconds. The display will stop flashing and return to normal time display, saving your settings. If no action is taken for a few seconds during setting, the watch will automatically exit setting mode.
Important Note: The touch sensor is highly sensitive. Avoid accidental touches during and after setting. If the time changes unexpectedly, repeat the setting process carefully.
3. Operation
3.1 Viewing the Time
To view the current time, gently tap the center of the watch face once. The LED display will illuminate for a few seconds, showing the time, then turn off automatically to conserve battery.
3.2 Adjusting the Strap
The watch features an adjustable PU leather strap with a traditional tang buckle clasp. To adjust, simply thread the strap through the buckle and secure it at the desired hole for a comfortable fit. The strap is designed to fit wrist sizes from 5.5 inches to 8 inches.
Figure 3: Side view showing the adjustable strap.
4. Care and Maintenance
4.1 Cleaning
To clean the watch, wipe it gently with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the finish or the display.
4.2 Water Resistance
This watch is NOT water resistant. Avoid exposing the watch to water, including rain, splashes, showering, or swimming. Water exposure can cause permanent damage to the internal components.
4.3 Battery Replacement
The watch is powered by a non-rechargeable battery. When the display becomes dim or unresponsive, the battery may need replacement. Battery replacement should be performed by a qualified technician to avoid damaging the watch's internal components or compromising its integrity. Attempting to replace the battery yourself may void the warranty.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display does not light up. | Low or depleted battery. | Replace the battery (refer to Section 4.3). |
| Time/Date changes unexpectedly. | Accidental touch to the sensitive display. | Re-set the time and date carefully (refer to Section 2.2). Be mindful of accidental touches. |
| Difficulty setting time/date. | Incorrect timing of taps/holds on the sensitive display. | Practice the tap and hold sequence as described in Section 2.2. Ensure firm but gentle presses for the specified duration. |
| Watch is not functioning. | Internal malfunction or severe damage. | Contact Accutime customer support for assistance (refer to Section 7). |
6. Product Specifications
| Model Number | LAS4040AZ |
| Brand | Accutime |
| Display Type | Digital LED |
| Movement Type | Quartz |
| Case Material | Metal |
| Strap Material | PU Leather (Starry Pattern) |
| Clasp Type | Tang Buckle |
| Wrist Size Range | 5.5" to 8" |
| Water Resistance | Not Water Resistant |
| Product Dimensions | 4.09 x 3.03 x 2.99 inches (packaging) |
| Item Weight | 6.4 ounces |
7. Warranty and Support
7.1 Limited Warranty
This Accutime watch comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation included with your purchase or contact Accutime customer support.
7.2 Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact Accutime customer support. You can often find contact information on the product packaging or the official Accutime website. Please have your model number (LAS4040AZ) and purchase details ready when contacting support.
For more information about Accutime products, visit the Accutime Store on Amazon.