MASIGO Dash Cam Mounting Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation and proper use of the MASIGO Dash Cam Mounting Kit, featuring 3M VHB Double-Sided Adhesive Pads and Car Windshield Electrostatic Film. This kit is designed to securely mount your dash cam, GPS unit, or other car accessories to your vehicle's windshield or other flat surfaces, ensuring reliable performance and easy removal without residue.

2. Package Contents

Please verify that all items are present in your package:

• 4 x 3M VHB Double-Sided Adhesive Pads (various sizes)
• 2 x Car Windshield Electrostatic Film
• Quick Guide (included in box)

Figure 2.1: Overview of the MASIGO Dash Cam Mounting Kit components.

3. Safety Information

• Ensure the mounting surface is clean, dry, and free of dust or grease before application.
• Avoid applying the adhesive pads or film in extreme temperatures (too cold or too hot) as this may affect adhesion.
• Do not obstruct your view of the road or any vehicle controls when mounting your device.
• Keep out of reach of children.

4. Installation Guide

This kit provides two primary components for mounting: the 3M VHB Double-Sided Adhesive Pad and the Electrostatic Film. For optimal results and easy removal, it is recommended to use both components together.

4.1. 3M VHB Double-Sided Adhesive Pad Installation

The 3M VHB tape provides a strong, long-lasting bond. It is designed to withstand various temperatures and conditions.

1. Step 1: Prepare the Device Mount. Remove any previously used adhesive tape from the base surface of your dash cam mount or device. Ensure the surface is clean and dry.
2. Step 2: Apply the VHB Tape. Peel off the yellow protective film from one side of the 3M VHB adhesive pad, exposing the sticky side. Carefully align and firmly press the adhesive pad onto the clean base surface of your dash cam mount.
3. Step 3: Ensure Secure Bond. Press firmly on the adhesive pad for several seconds to ensure a strong and secure bond with the mount.
4. Step 4: Allow Adhesion Time. For optimal adhesion, allow the adhesive pad to bond with the mount for approximately 2 hours before attaching it to the electrostatic film or windshield. The longer the adhesive time, the stronger the viscosity will be.

Figure 4.1: Detailed steps for 3M VHB adhesive pad installation.

4.2. Electrostatic Film Installation

The electrostatic film allows for easy and residue-free removal of your dash cam mount from the windshield. It acts as a protective layer between the VHB tape and the glass.

1. Step 1: Clean the Windshield. Thoroughly clean the area of your windshield where you intend to mount the device. Ensure it is free of dust, dirt, and grease.
2. Step 2: Apply the Electrostatic Film. Peel off the red label protective film from the electrostatic film. Carefully attach the film to your car's windshield, ensuring it is smooth and free of air bubbles. Use a credit card or similar tool to smooth out any bubbles.
3. Step 3: Attach the Dash Cam Mount. Peel off the black label protective film from the 3M VHB adhesive pad (which is already attached to your dash cam mount). Carefully align and attach the dash cam mount to the electrostatic film on the windshield.
4. Step 4: Secure the Mount. Press the dash cam body firmly against the electrostatic film for about 30 seconds to ensure a secure attachment.

Figure 4.2: Detailed steps for electrostatic film and dash cam mount installation.

4.3. Video Installation Guide

Watch this official video for a visual guide on applying the electrostatic film for dash cam installation:

5. Usage and Benefits

The MASIGO mounting kit is designed for versatile use with various car accessories, including dash cams, GPS units, and antennas. Its key benefits include:

• Secure Mounting: The high-strength 3M VHB adhesive ensures your device remains firmly in place, even under challenging driving conditions.


Figure 5.1: Secure mounting of a dash cam.

• Long-Lasting Performance: The materials are selected for superior clarity and heat resistance, preventing common issues like adhesive failure due to temperature fluctuations.


Figure 5.2: Dash cam mounted, demonstrating long-lasting performance in various conditions.

• Clear Windshield: The electrostatic film ensures no residue is left on your windshield upon removal, maintaining clarity.

Figure 5.3: Clear windshield view with mounted device.
• Easy Removal and Reapplication: The electrostatic film allows for easy removal and reapplication of the mount, providing flexibility if you need to adjust placement or transfer the device to another vehicle.


Figure 5.4: Easy removal of the electrostatic film without residue.

6. Maintenance

To ensure the longevity and effectiveness of your mounting kit:

• Keep the adhesive pads and electrostatic film clean and free from dust or debris when not in use.
• Store unused components in a cool, dry place away from direct sunlight.
• If the electrostatic film loses its cling, gently clean it with a damp cloth and allow it to air dry.

7. Troubleshooting

8. Specifications

• Brand: MASIGO
• Model Number: MA6
• Item Weight: 0.317 ounces
• Form Factor: Double-Sided Adhesive Pad, Electrostatic Film
• Color: Gray (adhesive pads)
• Special Features: Weather Resistant
• Compatible Devices: Dash Cam Mounts, GPS Units, Antennas
• Shell Type (Adhesive): Gray, closed-cell acrylic foam tape
• Country of Origin: Taiwan
• Date First Available: May 4, 2023

Figure 8.1: Dimensions of the 3M VHB Adhesive Pads.

Figure 8.2: Dimensions of the Electrostatic Film.

Figure 8.3: Adhesive Pad Thickness Comparison.

9. Warranty and Support

MASIGO products are manufactured with high-quality standards. For any questions, technical support, or warranty inquiries, please contact MASIGO customer service through their official channels or the retailer where the product was purchased. Please refer to the original product packaging or the MASIGO official website for the most up-to-date warranty information and contact details.