Jocisland King Size Lift Up Storage Bed Instruction Manual

Important Safety Information

Caution: Use the hydraulic lift mechanism carefully to avoid injury. Do not exceed the maximum weight recommendation of 1000 pounds. Follow assembly instructions carefully to prevent instability or injury.

1. Setup and Assembly

This Jocisland King Size Lift Up Storage Bed requires assembly. It is recommended that two people assemble the bed frame to ensure ease and safety.

1.1 Before You Begin

• Verify all parts are present and undamaged. Refer to the included detailed instructions and numbered parts list.
• Ensure you have the necessary assembly tools, which are provided.
• Clear a spacious area for assembly to prevent damage to the product or your surroundings.
• Do not use power tools for assembly as this may overtighten screws and damage the frame.

1.2 Assembly Steps

Follow the step-by-step instructions provided in the packaging. Pay close attention to diagrams and part numbers.

Figure 1: Overall dimensions of the King Size Lift Up Storage Bed. The headboard height is 50.1 inches, total length 85.1 inches, and width 81.8 inches.

Figure 2: Solid wood slats with plastic buckles designed for quick and easy assembly.

Note: Some users have reported minor discrepancies in part labeling (e.g., K1 vs K2). Refer to the visual diagrams carefully if you encounter such issues.

2. Operating Instructions

2.1 Hydraulic Lift Storage

The bed features a hydraulic lift mechanism for accessing the under-bed storage space. This mechanism is designed for effortless lifting.

Figure 3: The hydraulic lift system provides ample, enclosed storage space beneath the mattress platform.

• To lift the mattress platform, locate the fabric strap or handle at the foot of the bed.
• Grasp the strap firmly and pull upwards. The hydraulic pistons will assist in lifting the platform smoothly.
• To lower the platform, gently push it down. It may require some initial force, especially before a mattress is placed on it, as the hydraulics are designed to support the weight of a mattress.
• Ensure hands and fingers are clear of moving parts when operating the lift mechanism.

Figure 4: An effortless hand lift mechanism allows easy access to the storage area.

2.2 Mattress Compatibility

This bed frame is designed to be used without a box spring. It provides full support to the mattress with its wood slats and metal center legs.

• Recommended mattress thickness: 8-14 inches.
• The bed frame includes an anti-falling device (non-slip mattress retainer) to prevent your mattress from sliding.

Figure 5: The bed frame supports mattresses between 8-14 inches in height. A non-slip retainer prevents mattress movement.

3. Maintenance

3.1 Cleaning Instructions

• For general cleaning of the velvet upholstery, wipe with a damp cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the fabric.
• For spills, blot immediately with a clean, dry cloth.
• Regularly vacuum the headboard and frame with a soft brush attachment to remove dust and debris.

3.2 General Care

• Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability.
• Avoid placing the bed in direct sunlight or near heat sources to prevent fading or damage to the upholstery.
• Do not jump on the bed or apply excessive force to the frame.

4. Troubleshooting

• Difficulty with Hydraulic Lift: If the hydraulic lift is stiff or difficult to lower, especially without a mattress, this is normal. The mechanism is designed to support the weight of a mattress. Once a mattress is in place, operation should be smoother. If issues persist, ensure no obstructions are present in the mechanism.
• Noises (Squeaking/Creaking): Ensure all assembly bolts are securely tightened. The bed frame includes EVA padded tape on metal slats to minimize noise. If noise occurs, check for loose connections or friction points.
• Missing or Damaged Parts: If you receive parts that are missing or damaged, do not proceed with assembly. Contact Jocisland customer support immediately for assistance.
• Uneven Bed Frame: During assembly, ensure all components are aligned correctly before tightening. If the bed appears uneven after assembly, re-check the connections and ensure the floor surface is level.

5. Specifications

6. Warranty and Support

6.1 Product Warranty

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact Jocisland customer service directly. Warranty terms and conditions may vary.

6.2 Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Jocisland customer support. Contact details can typically be found on the packaging, the official Jocisland website, or through your retailer.

You can also visit the official Jocisland store for more information: Jocisland Store