1. Introduction
The Kidde Smart Hardwired Smoke Alarm (Model P4010ACS-WF) is designed to provide early warning of smoke and fire hazards in your home. This device integrates photoelectric sensing technology with smart features, including Wi-Fi connectivity for remote alerts and voice commands. It operates on 120V AC power and includes a 10-year sealed lithium battery for backup during power outages.
Key Features:
- Photoelectric Sensor: Detects visible fire particles associated with smoldering fires.
- Voice Alerts: Announces "Fire! Fire!" upon detection and "Replace Alarm" at end-of-life.
- Wi-Fi Connectivity: Sends real-time notifications to your smartphone via the Kidde app.
- 10-Year Sealed Battery Backup: Provides continuous protection during power failures.
- Smart Home Compatibility: Works with Amazon Alexa and Google Home for voice commands.
- LED Ring Indicators: Clearly displays operational status (Green, Amber, Red).
- Test-Hush Button: Allows for easy testing and temporary silencing of nuisance alarms.
- Whole-Home Activation: Interconnects with compatible Kidde alarms for simultaneous alerts.
Figure 1: Kidde Smart Hardwired Smoke Alarm and packaging.
2. Important Safety Information
Please read and understand all instructions before installing and operating this smoke alarm. Failure to follow these instructions may result in property damage, injury, or death. Keep this manual for future reference.
- This device is designed for residential use only.
- Ensure power is OFF before installation or maintenance.
- Do not paint over the alarm. Paint can clog the sensing chambers and prevent the alarm from operating correctly.
- Test the alarm weekly to ensure proper operation.
- Never ignore a smoke alarm. Investigate the cause of any alarm immediately.
- This alarm is not intended to replace proper fire safety practices, including regular fire drills and escape plans.
3. Package Contents
Verify that all items are present in the package:
- Kidde Smart Smoke Alarm (P4010ACS-WF)
- AC Connector
- Trim Plate Accessory
- Assembly User Card
- User Guide (this document)
4. Setup and Installation
4.1 Choosing a Location
Install smoke alarms on every level of your home, inside each bedroom, and outside each sleeping area. Avoid installing in kitchens, bathrooms, or garages where steam or exhaust might cause nuisance alarms.
4.2 Hardwired Installation
- Turn off power: Before beginning, ensure the power to the circuit where you are installing the alarm is turned off at the main fuse or circuit breaker box.
- Mount the trim plate: Secure the trim plate accessory to the electrical box on the ceiling or wall.
- Connect wiring: Connect the AC connector wires to your home's electrical wiring according to local electrical codes. Typically, this involves connecting black to black (hot), white to white (neutral), and red to red (interconnect, if applicable).
- Attach alarm to connector: Plug the AC connector into the back of the smoke alarm.
- Mount the alarm: Align the alarm with the trim plate and twist clockwise until it locks securely into place.
- Restore power: Turn the power back on at the main fuse or circuit breaker box. The alarm will chirp once and the green LED will illuminate, indicating it is receiving AC power.
Figure 2: Hardwired installation of the smoke alarm.
4.3 Battery Backup Activation
The alarm includes a 10-year sealed lithium battery that activates automatically upon initial power-up. No battery replacement is required for the life of the alarm.
4.4 Kidde App Setup and Wi-Fi Connection
- Download the Kidde App: Search for "Kidde" in your smartphone's app store (iOS or Android) and download the application.
- Create an Account: Follow the in-app instructions to create a new Kidde account or log in if you already have one.
- Add Device: Select the option to add a new device.
- Scan QR Code: Locate the QR code on the back of your smoke alarm and scan it using the Kidde app. Ensure your phone is connected to a 2.4GHz Wi-Fi network.
- Follow In-App Prompts: Complete the pairing process by following the instructions provided in the Kidde app. This will connect your alarm to your home Wi-Fi network and your Kidde account.
Figure 3: Scanning the QR code for app setup.
Figure 4: Kidde app interface for device management.
5. Operating the Smoke Alarm
5.1 LED Ring Indicators
The LED ring on the alarm provides visual status indications:
- Green: Normal operation. The alarm is powered and functioning correctly.
- Amber: Operating error or fault detected. Refer to troubleshooting for details.
- Red: Smoke or fire hazard detected. The alarm will sound.
Figure 5: LED ring color indicators.
5.2 Voice Warning Alerts
In addition to the 85-decibel alarm, the device provides clear voice announcements:
- "Fire! Fire!": Repeated when smoke or fire is present.
- "Replace Alarm": Announced at the end of the device's 10-year lifespan.
Figure 6: Voice warning alerts feature.
5.3 Test-Hush Button
The large button on the front of the alarm serves multiple functions:
- Test: Press and hold the button to test the alarm's functionality. The alarm will sound and the voice alert will activate. Perform this test weekly.
- Hush: Press the button to temporarily silence nuisance alarms (e.g., from cooking smoke). The alarm will silence for a short period, typically 8-10 minutes, before resetting.
- Silence Chirps: Temporarily silences low battery or end-of-life chirps for up to 24 hours (maximum 7 days).
5.4 Kidde App Features
When connected to Wi-Fi, the Kidde app provides enhanced control and monitoring:
- Real-time Notifications: Receive alerts on your smartphone when smoke is detected, even when you are away from home.
- Remote Testing: Test your alarm directly from the app.
- Smart Hush: Silence false alarms through the app when you are connected to the same Wi-Fi network as the alarm.
- Status Monitoring: View the operational status of your alarm and other connected Kidde devices.
Figure 7: Kidde app features for alarm management.
5.5 Whole-Home Activation
This smoke alarm is capable of hardwired interconnection with other select Kidde alarms. When one interconnected alarm detects smoke, all connected alarms will sound, providing comprehensive coverage throughout your home.
Figure 8: Illustration of whole-home activation with interconnected alarms.
6. Maintenance
6.1 Regular Testing
Test your smoke alarm weekly by pressing and holding the Test-Hush button until the alarm sounds. This confirms the alarm's electronics, battery, and horn are working.
6.2 Cleaning Your Alarm
Dust and debris can accumulate in the sensing chamber, potentially causing nuisance alarms or reducing sensitivity. Clean your alarm at least once a month:
- Remove the alarm from its mounting bracket.
- Use a soft brush attachment on your vacuum cleaner to remove dust from the alarm's exterior and around the sensing chamber openings.
- Alternatively, use a can of compressed air to blow out any dust.
- Reinstall the alarm and test it.
6.3 Battery Information
The Kidde Smart Smoke Alarm features a 10-year sealed lithium battery. This battery is designed to last the entire lifespan of the alarm and is not replaceable. When the alarm reaches its end-of-life, it will chirp and announce "Replace Alarm". At this point, the entire unit must be replaced.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm sounds frequently without smoke (Nuisance Alarm) | Cooking fumes, steam, high humidity, dust, insects, proximity to vents. | Press the Hush button. Clean the alarm (see Maintenance). Relocate the alarm if consistently triggered by non-fire sources. Ensure proper ventilation during cooking. |
| Alarm chirps periodically | End-of-life warning, low battery (though sealed, this indicates unit replacement). | If the alarm announces "Replace Alarm", the unit has reached its end-of-life and must be replaced. You can temporarily silence chirps for up to 24 hours by pressing the Test-Hush button. |
| Alarm does not sound during test | No AC power, faulty unit, battery issue. | Check circuit breaker. Ensure alarm is properly connected to AC power. If green LED is off, check wiring. If problem persists, replace the unit. |
| Cannot connect to Wi-Fi or Kidde App | Incorrect Wi-Fi password, 5GHz network, weak signal, app issues. | Ensure your phone is on a 2.4GHz Wi-Fi network. Verify Wi-Fi password. Move alarm closer to router. Restart router and alarm. Reinstall Kidde app if necessary. |
| Amber LED indicator is on | Operating error or fault. | Clean the alarm. If the amber light persists after cleaning and a power cycle, the unit may be faulty and require replacement. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | P4010ACS-WF |
| Power Source | 120V AC Hardwired with 10-Year Sealed Lithium Battery Backup |
| Sensor Type | Photoelectric |
| Alarm Loudness | 85 dB at 10 feet |
| Operating Humidity | Up to 95% Relative Humidity (RH), Non-Condensing |
| Operating Temperature | Refer to product packaging for specific range (Upper Temperature Rating: 100 Degrees Fahrenheit) |
| Compatible Devices | Android, iOS 12 or Newer, iPad, iPhone (Alexa, Google Home) |
| Product Dimensions | 2.36"D x 5.04"W x 5.04"H |
| Item Weight | 11.2 ounces |
| Certification | UL 2034, NFPA 72 |
| UPC | 047871320653 |
Figure 9: Product dimensions.
9. Warranty Information
This Kidde Smart Hardwired Smoke Alarm (Model P4010ACS-WF) comes with a 10-Year Limited Warranty. The warranty covers defects in materials and workmanship under normal use and service. The 10-year warranty period begins when the alarm is powered on. If the power-on date is unknown, it should be assumed the alarm should be replaced after 10 years from the manufacturing date.
Please note that this is not a battery performance claim. The sealed lithium battery is designed to last the life of the alarm, but the warranty specifically covers the alarm unit itself.
For full warranty details and terms, please refer to the official Kidde documentation or contact Kidde customer support.
10. Support and Contact
For further assistance, technical support, or warranty claims, please refer to the following resources:
- Kidde App: The Kidde app provides in-app support and troubleshooting guides.
- Online Resources: Visit the official Kidde website for FAQs, product manuals, and support contact information. You can find more information at the Kidde Store.
- Customer Service: Contact Kidde customer service directly for personalized support. Refer to your product packaging or the Kidde website for current contact details.
