Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AFX Haley 14-inch LED Undercabinet Light. Please read this manual thoroughly before installation and retain it for future reference.
The AFX Haley LED Undercabinet Light features a low-profile design in an extruded aluminum housing, with a depth of only 1 inch. It is linkable up to 200W and includes a Hi/Low switch for brightness control, as well as a selectable 4 CCT (Correlated Color Temperature) color changing switch for adjustable white light. It is equipped with a frosted acrylic diffuser for even light distribution.
Image: AFX Haley 14-inch LED Undercabinet Light, showcasing its sleek design and white finish.
Safety Information
Always follow basic safety precautions when installing or working with electrical products to reduce the risk of fire, electric shock, and personal injury. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Disconnect power at the circuit breaker before installation or servicing.
- Ensure all connections are secure and properly insulated.
- Do not install in wet locations. This product is rated for indoor use only.
- Do not modify the fixture. Any modifications may void the warranty and create a safety hazard.
Setup and Installation
The AFX Haley LED Undercabinet Light can be installed via direct wire or plug-in method (power cord and connecting cables sold separately).
Tools Required:
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers (for direct wire installation)
- Drill (if pre-drilling pilot holes for mounting screws)
- Measuring Tape
- Pencil
Installation Steps:
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the installation area under the cabinet.
- Position the Fixture: Hold the undercabinet light in the desired mounting location. Mark the positions for the captive mounting screws.
- Mount the Fixture: Secure the fixture to the underside of the cabinet using the captive mounting screws. Ensure the fixture is firmly attached.
- Wiring (Direct Wire):
- Open the rear access plate for easy wiring.
- Connect the household wiring to the fixture's wires (Black to Black, White to White, Ground to Ground) using appropriate wire connectors.
- Securely close the rear access plate.
- Wiring (Plug-in):
- If using a power cord (sold separately), connect it to the designated port on the fixture.
- Plug the power cord into a suitable electrical outlet.
- Linkable Installation: If linking multiple units, use connecting cables (sold separately) to connect them end-to-end or via jumper cables. Ensure the total wattage does not exceed 200W.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Operating Instructions
Your AFX Haley LED Undercabinet Light is designed for user-friendly operation.
Brightness Control (Hi/Low Switch):
The fixture includes a built-in switch to adjust the light output. Toggle the switch to select between high brightness and low brightness settings.
Color Temperature Selection (4 CCT Switch):
A separate switch allows you to select from four different Correlated Color Temperatures (CCTs). This enables you to customize the white light output to match your preference or existing lighting. Cycle through the switch positions to find the desired CCT.
Maintenance
The AFX Haley LED Undercabinet Light requires minimal maintenance.
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or diffuser.
- LEDs: The integrated LED light source is designed for long life and does not require replacement.
Troubleshooting
If your AFX Haley LED Undercabinet Light is not functioning correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Switch is in the "Off" position. Loose wiring connection. | Check circuit breaker. Ensure the Hi/Low switch is in an "On" position. Verify all wiring connections are secure (power off first). |
| Light flickers or is dim. | Loose wiring connection. Incorrect CCT setting. Overloaded circuit (for linked units). | Check wiring connections (power off first). Adjust the 4 CCT switch. Ensure total wattage of linked units does not exceed 200W. |
| Color temperature cannot be changed. | 4 CCT switch not properly engaged. | Ensure the 4 CCT switch is fully toggled to each position. |
If the issue persists after attempting these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | AFX |
| Model Name | Haley LED Undercabinet - White Finish |
| Item Model Number | HEYU14WH |
| Product Dimensions | 14"L x 2.25"W x 1"H |
| Color | White / Frosted |
| Material | Aluminum (Housing), Acrylic (Shade) |
| Light Source Type | LED |
| Wattage | 9 watts |
| Brightness | 525 lumens |
| Efficiency | 58.33 lumens per watt |
| Special Features | 4-in-1 CCT, Hi/Low Switch, Linkable (up to 200W) |
| Installation Type | Under Cabinet Mount (Direct Wire or Plug-in) |
| Indoor/Outdoor Usage | Indoor |
| Control Method | Push Button, Touch |
| Water Resistance Level | Moisture Resistant |
| Assembly Required | Yes |
Warranty and Support
Warranty Information:
This AFX LED Undercabinet Light comes with a 5 Year LED Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact AFX customer support. Refer to the product packaging or the official AFX website for current contact information.
You may also consider purchasing additional protection plans for extended coverage:
- 3-Year Protection Plan
- 4-Year Protection Plan
- Complete Protect (monthly plan)
Note: Protection plans are sold separately and are subject to their own terms and conditions.
