1. Introduction
This manual provides essential information for the safe and efficient operation of your new Haier 7 kg Top Load Automatic Washing Machine, model HWM70-708NZP. Please read these instructions carefully before installation and use, and retain them for future reference.
Figure 1: Front view of the Haier HWM70-708NZP Washing Machine.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This appliance is intended for household use only.
- Ensure the power supply matches the voltage requirements (220 Volts AC).
- Do not operate the machine with a damaged power cord or plug.
- Keep children and pets away from the machine during operation.
- Do not wash items that are soiled with flammable substances.
- Always unplug the machine before cleaning or performing maintenance.
3. Setup
3.1 Unpacking
Carefully remove the washing machine from its packaging. Inspect for any damage incurred during transit. The package includes the washing machine unit and necessary accessories for installation.
3.2 Placement
Place the washing machine on a firm, level surface. Ensure there is adequate space around the unit for ventilation and connections. The machine is designed for freestanding installation. Its dimensions are approximately 6.1D x 5.5W x 9.5H Meters.
Figure 2: Angled view of the washing machine, illustrating placement and hose connection.
3.3 Water Connection
Connect the water inlet hose to a cold water tap and to the designated inlet on the washing machine. Ensure all connections are secure to prevent leaks. This machine features Near Zero Pressure technology, allowing effective cleaning even at extremely low water pressure (0.001 - 0.002 MPA).
3.4 Power Connection
Plug the power cord into a grounded electrical outlet. The machine operates on 220 Volts (AC) and has a wattage of 400 Watts. Do not use extension cords or adapters.
4. Operating Instructions
4.1 Control Panel Overview
The washing machine features a knob control console for program selection and various buttons for settings. Familiarize yourself with the functions of each button and the program selector knob.
Figure 3: Detailed view of the control panel.
4.2 Loading Laundry
Open the transparent lid. Load clothes loosely into the drum, ensuring not to exceed the 7 kg capacity. Overloading can affect washing performance and damage the machine. The transparent lids are lightweight and designed for smooth, slow closure.
Figure 4: Top view with lid open, showing the drum ready for loading.
4.3 Adding Detergent
Add the appropriate amount of detergent to the dispenser drawer according to the detergent manufacturer's instructions and the load size.
4.4 Selecting Wash Programs
Turn the knob to select the desired wash program. Options may include standard wash, delicate, quick wash, etc. This machine is designed for high efficiency washing.
4.5 Starting a Wash Cycle
Close the lid securely. Press the 'Start/Pause' button to begin the wash cycle. The machine will automatically fill with water and proceed with the selected program.
4.6 Special Features
- Oceanus Wave Drum: The innovative cube-shaped drum design ensures effective cleaning with reduced abrasion on clothes.
- Bionic Magic Filter: Two enlarged bionic magic filters are specially designed to effectively remove lint during the wash cycle, ensuring a clean and hygienic wash.
Figure 5: Interior view of the Oceanus Wave Drum.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your washing machine.
5.1 Cleaning the Drum
Periodically run a self-clean cycle or a hot wash with a washing machine cleaner to remove detergent residue and odors from the drum.
5.2 Cleaning the Bionic Magic Filter
The bionic magic filters should be cleaned regularly to maintain lint removal efficiency. Remove the filters, rinse them under running water, and reinsert them.
Figure 6: Close-up of the bionic magic filter inside the drum.
5.3 Exterior Cleaning
Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
Refer to this section for common issues and their solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord unplugged, lid not closed, power outage | Check power connection, ensure lid is closed, check household power supply |
| No water filling | Water tap closed, inlet hose kinked, water pressure too low | Open water tap, straighten hose, check water supply pressure |
| Excessive vibration | Machine not level, unbalanced load | Adjust leveling feet, redistribute laundry evenly in the drum |
| Poor washing results | Overloading, insufficient detergent, dirty filter | Reduce load size, use correct detergent amount, clean bionic magic filters |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Haier |
| Model | HWM70-708NZP |
| Capacity | 7 Kilograms |
| Annual Energy Consumption | 200 Kilowatt Hours |
| Noise Level | 75 Decibels |
| Installation Type | Freestanding |
| Special Feature | High Efficiency |
| Colour | Silver Grey |
| Control Console | Knob |
| Access Location | Top Load |
| Voltage | 220 Volts (AC) |
| Wattage | 400 Watts |
| Item Weight | 22 kg |
| Product Dimensions (LxWxH) | 6.1D x 5.5W x 9.5H Meters |
8. Warranty and Support
8.1 Warranty Information
This product comes with a 10-year warranty care. Please refer to the warranty card included with your purchase for detailed terms and conditions.
8.2 Customer Support
For technical assistance, service requests, or inquiries, please contact Haier customer support. Refer to the contact information provided in your product documentation or visit the official Haier website.
