Introduction
Thank you for purchasing the HOCO HC8 Bluetooth Speaker. This manual provides important information regarding the setup, operation, and maintenance of your device. Please read it thoroughly before use and keep it for future reference.
Package Contents
Please check the package for the following items:
- Hoco HC8 Pulsating Bluetooth Speaker
- Type-C Charging Cable
- User Manual (this document)
Product Overview
The Hoco HC8 Bluetooth Speaker features 360° surround sound, 11 atmosphere light modes (including 2 music-sync modes), and multiple playback options. Familiarize yourself with the speaker's components.
Figure 1: Front view of the Hoco HC8 Bluetooth Speaker, showcasing its cylindrical design and vibrant, multi-colored pulsating light display. The speaker grille is visible at the top.
Figure 2: Bottom view of the Hoco HC8 Bluetooth Speaker, highlighting the control buttons and ports. The speaker's base is black with clearly labeled icons for power, volume, and mode selection.
Setup
Charging the Speaker
Before first use, fully charge the speaker. Connect the supplied Type-C charging cable to the speaker's charging port and the other end to a USB power adapter (not included). The charging time is approximately 2.5 hours.
Powering On/Off
- To power on: Press and hold the Power button until you hear an audible prompt.
- To power off: Press and hold the Power button again until the speaker shuts down.
Operating Instructions
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Hoco HC8" from the list of devices.
- Once paired, the speaker will provide an audible confirmation.
The transmission distance for Bluetooth is up to 10 meters.
Playback Modes
The Hoco HC8 supports multiple playback modes:
- Bluetooth (BT): Wireless audio streaming from a paired device.
- FM Radio: Tune into FM radio stations.
- TF Card: Play audio files directly from a TF (microSD) card inserted into the speaker's slot.
- USB Flash Drive: Play audio files from a USB flash drive inserted into the USB port.
- TWS (True Wireless Stereo): Connect two Hoco HC8 speakers for a stereo sound experience. (Refer to TWS pairing instructions below).
- AUX: Connect an external audio device using a 3.5mm audio cable (not included) to the AUX input.
Controlling Music Playback
- Play/Pause: Short press the Play/Pause button.
- Volume Up: Short press the Volume + button.
- Volume Down: Short press the Volume - button.
- Next Track: Long press the Volume + button.
- Previous Track: Long press the Volume - button.
Light Modes
The speaker features 11 LED atmosphere light modes. Two of these modes follow the rhythm of the music. Press the Light Mode button (often indicated by a light bulb icon) to cycle through the available light effects.
Figure 3: The Hoco HC8 speaker displaying a dynamic blue and yellow light pattern, illustrating one of its many atmosphere modes. The light emanates from within the transparent casing.
TWS (True Wireless Stereo) Pairing
To pair two Hoco HC8 speakers for TWS stereo sound:
- Ensure both speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, long press the TWS button (refer to speaker button layout if available).
- The speakers will automatically search and pair with each other. An audible prompt will confirm successful pairing.
- Once TWS paired, connect your device to one of the speakers via Bluetooth. Audio will now play through both speakers in stereo.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the speaker regularly, even if not in use for extended periods. Avoid fully discharging the battery frequently.
- Water Resistance: The product is indicated as waterproof. However, avoid submerging it in water or exposing it to heavy rain for prolonged periods. Ensure charging port covers are securely closed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; device Bluetooth off; too far from speaker. | Ensure speaker is in pairing mode. Turn device Bluetooth on/off. Move device closer to speaker (within 10m). |
| No sound. | Volume too low; incorrect mode selected; speaker not connected. | Increase volume on speaker and device. Check playback mode. Re-pair Bluetooth. |
| Light modes not changing. | Button not pressed correctly. | Ensure you are pressing the dedicated Light Mode button. |
Specifications
| Feature | Detail |
|---|---|
| Model | HC8 |
| Brand | Hoco |
| Bluetooth Version | v5.0 |
| Chip | JL |
| Battery Capacity | 1800 mAh |
| Charging Time | Approx. 2.5 hours |
| Call/Music Playback Time | 4 hours |
| Speaker Unit | 1 x 57 mm |
| Power Output | 1 x 10 W |
| Bluetooth Transmission Distance | 10 m |
| Playback Modes | BT, FM, TF Card, USB Flash Drive, TWS, AUX |
| Charging Connector | Type-C |
| LED Atmosphere Light | 11 modes (2 music-sync) |
| Dimensions | 210 x 95 x 95 mm |
| Weight | 760 g |
| Waterproof | Yes |
| Included Components | Type-C Charging Cable |
| Mounting Type | Tabletop |
| Speaker Type | Soundbar |
| Special Features | LED Light |
| Recommended Use | For smartphones or tablets |
| Color | Black |
Warranty and Support
Warranty Information
Specific warranty details are typically provided at the point of purchase or on the manufacturer's official website. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your Hoco HC8 Bluetooth Speaker, please contact your retailer or visit the official HOCO website. Contact information may also be found on the product packaging.
