A-iPower SUA1500i Portable Inverter Generator User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your A-iPower SUA1500i Portable Inverter Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

The A-iPower SUA1500i is a compact and lightweight inverter generator designed for various applications, including camping, tailgating, home backup, and emergency power needs. It delivers 1500 starting watts and 1200 running watts, featuring quiet operation and clean power output suitable for sensitive electronics.

2. Safety Information

WARNING: Operating this generator can produce carbon monoxide, an odorless, colorless, poisonous gas. Carbon monoxide can kill you. Always operate the generator outdoors in a well-ventilated area, far away from windows, doors, and vents.

Read and understand all instructions before operating the generator.
Keep children and pets away from the generator during operation.
Do not operate the generator indoors or in enclosed spaces.
Ensure proper grounding of the generator.
Never refuel a hot or running engine. Allow the generator to cool before adding fuel.
Store fuel in an approved container in a well-ventilated area, away from ignition sources.
Wear appropriate personal protective equipment (PPE) when handling fuel or performing maintenance.
The generator is equipped with a CO sensor with auto shutdown technology for added safety. Do not disable or tamper with this feature.

3. Product Features

High Output & Quiet Operation

The SUA1500i provides 1,500 starting watts and 1,200 running watts. With a noise level of only 60dB, it is suitable for environments where quiet operation is desired, such as camping or tailgating.

Powerful & Efficient Engine

Equipped with a 60cc OHV high-performance 4-cycle engine, this generator offers fuel efficiency, reliability, and excellent heat dissipation for long operational life.

Pure Power for Sensitive Electronics

Inverter technology ensures a clean and stable power source with less than 3% Total Harmonic Distortion (THD). This makes it safe for charging sensitive electronics like laptops, smartphones, and operating delicate power tools.

Comprehensive Control Panel

The control panel includes a CO sensor indicator light, data indicator lights, one Duplex 5-20R 20A 120VAC outlet, one 3.6A USB-A port, and one 3.0A USB-C port. It is also parallel capable for increased power output when linked with another compatible unit.

Low Idle Technology & Compact Design

Weighing only 28.5 lbs, the generator is ultra-lightweight for easy transport. Low idle technology allows for an extended run time of 8 hours at 25% load with its 0.7-gallon fuel tank.

A-iPower SUA1500i Inverter Generator highlighting key features: Quiet Technology, Parallel Ready, Clean Power, and Ultra-Lightweight. — Figure 3.1: Key features of the A-iPower SUA1500i Inverter Generator, including quiet operation, parallel capability, clean power output, and lightweight design.

4. Setup

4.1 Unpacking and Included Components

Carefully remove the generator and all components from the packaging. Inspect for any shipping damage. If damage is found, contact customer service immediately.

Contents included in the A-iPower SUA1500i generator box: User Manual/Quick Start Guide, Oil & Funnel, Tool Kit, and Parallel Cables. — Figure 4.1: Components included with the SUA1500i generator, typically comprising the user manual, oil and funnel, a basic tool kit, and parallel cables.

The box typically includes:

A-iPower SUA1500i Inverter Generator
User Manual / Quick Start Guide
Engine Oil and Funnel
Tool Kit
Parallel Cables (for linking with another compatible generator)

4.2 Adding Engine Oil

Place the generator on a level surface.
Locate the oil fill cap/dipstick.
Using the provided funnel, carefully pour the recommended engine oil (e.g., 10W-30 or 10W-40) into the oil reservoir. The capacity is approximately 0.4 quarts.
Do not overfill. Check the oil level using the dipstick; it should be at the upper limit.
Securely replace the oil fill cap/dipstick.

4.3 Adding Fuel

Ensure the generator is turned off and cool.
Use fresh, unleaded gasoline with an octane rating of 87 or higher.
Open the fuel tank cap.
Carefully pour gasoline into the fuel tank, filling it to just below the filler neck. The tank capacity is 0.7 gallons.
Securely close the fuel tank cap.

4.4 Control Panel Overview

Detailed view of the A-iPower SUA1500i generator's control panel, showing the CO sensor light, indicator lights, 120V AC 20A 5-20R outlets, DC outlets (USB-A and USB-C), Low Idle switch, and Parallel Ready connection. — Figure 4.2: The control panel of the SUA1500i, illustrating the various outlets, indicator lights, and control switches for operation.

The control panel features:

CO Sensor Light: Indicates the presence of carbon monoxide. The generator will automatically shut down if CO levels are too high.
Indicator Lights: Provide status updates (Output Ready, Overload, Low Oil).
120V AC 20A 5-20R Duplex Outlets: Standard household outlets for AC power.
DC Outlets: 1x 3.6A USB-A and 1x 3.0A USB-C for charging portable devices.
Low Idle Switch: Engages Eco-mode for fuel efficiency and quieter operation under light loads.
Parallel Ready Connection: Allows connection of two compatible A-iPower inverter generators for increased power output.

5. Operating Instructions

5.1 Starting the Generator

Place the generator on a firm, level surface outdoors, away from any structures, windows, or vents.
Ensure the fuel valve is in the 'ON' position.
Move the engine switch to the 'ON' position.
If the engine is cold, move the choke lever to the 'CHOKE' position.
Firmly pull the recoil starter handle until the engine starts.
Once the engine starts, gradually move the choke lever to the 'RUN' position.

5.2 Connecting Electrical Devices

Allow the generator to run for a few minutes to stabilize before connecting any devices.
Ensure the total wattage of connected devices does not exceed the generator's running wattage (1200W).
Plug your electrical devices into the appropriate AC or DC outlets on the control panel.
For optimal fuel efficiency and reduced noise, engage the 'Low Idle' (Eco-mode) switch when running light loads.

A-iPower SUA1500i generator operating outdoors, with an orange extension cord plugged into its control panel, providing power in a natural setting. — Figure 5.1: The SUA1500i generator in operation, demonstrating its use in an outdoor environment with an electrical device connected.

5.3 Parallel Operation (Optional)

The SUA1500i is parallel capable. To increase your available power, you can connect two compatible A-iPower inverter generators using the provided parallel cables. Refer to the parallel kit's specific instructions for detailed setup.

5.4 Stopping the Generator

Disconnect all electrical devices from the generator.
Move the engine switch to the 'OFF' position.
Turn the fuel valve to the 'OFF' position.

6. Maintenance

Regular maintenance is crucial for the longevity and reliable performance of your generator. Always ensure the generator is off and cool before performing any maintenance.

6.1 Maintenance Schedule

Item	Before Each Use	Every 25 Hours / Monthly	Every 100 Hours / Annually
Engine Oil Level	Check	Change
Air Filter	Check	Clean	Replace
Spark Plug		Inspect & Clean	Replace
Fuel Filter			Inspect & Clean

6.2 Storage

For long-term storage (more than 30 days), proper preparation is essential:

Add a fuel stabilizer to the fuel tank and run the engine for a few minutes to circulate it.
Alternatively, drain all fuel from the tank and carburetor.
Change the engine oil.
Clean the air filter.
Remove the spark plug and pour a small amount of engine oil into the cylinder. Pull the recoil starter a few times to distribute the oil, then reinstall the spark plug.
Clean the exterior of the generator.
Store the generator in a clean, dry, well-ventilated area, away from direct sunlight and extreme temperatures.

7. Troubleshooting

This section provides solutions to common operational issues. For problems not listed here, contact A-iPower customer support.

Problem	Possible Cause	Solution
Engine will not start	No fuel or low fuel level Engine switch OFF Fuel valve OFF Choke not set correctly Low oil level Spark plug fouled or faulty	Add fresh gasoline Turn engine switch to ON Turn fuel valve to ON Adjust choke as needed (CHOKE for cold, RUN for warm) Add engine oil to proper level Inspect, clean, or replace spark plug
No power output	Overload indicator light ON Circuit breaker tripped Generator not running at proper RPM	Reduce connected load Reset circuit breaker Check fuel and oil levels; ensure choke is in RUN position
Engine runs, then stops	Low oil shutdown activated Out of fuel CO sensor shutdown activated	Add engine oil Add fresh gasoline Move generator to a well-ventilated area; allow to cool before restarting

8. Specifications

Diagram showing the dimensions of the A-iPower SUA1500i generator: 18.3 inches long, 11.3 inches wide, and 17.5 inches high, with a weight of 28.5 lbs. — Figure 8.1: Physical dimensions and weight of the A-iPower SUA1500i Portable Inverter Generator.

Attribute	Value
Model	SUA1500i
Starting Wattage	1500 Watts
Running Wattage	1200 Watts
Engine Type	60cc OHV 4-Stroke
Fuel Type	Gasoline
Fuel Tank Capacity	0.7 Gallons
Run Time (25% Load)	8 Hours
Noise Level	60 dB
THD (Total Harmonic Distortion)	Less than 3%
Outlets	1x Duplex 5-20R 20A 120VAC, 1x 3.6A USB-A, 1x 3.0A USB-C
Dimensions (L x W x H)	18.3" x 11.3" x 19.5"
Item Weight	28.5 Pounds
Special Features	Automatic Idle Control, CO Sensor with Auto Shutdown, Parallel Capable

9. Warranty and Support

9.1 Warranty Information

The A-iPower SUA1500i Portable Inverter Generator comes with a 3 Year Limited Manufacturer's Warranty. This warranty covers defects in material and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

For full warranty terms and conditions, refer to the warranty card included with your product or visit the official A-iPower website.

9.2 Customer Support

If you require assistance with your A-iPower generator, have questions about operation, maintenance, or need to make a warranty claim, please contact A-iPower customer support.

For the most current contact information, please visit the official A-iPower website: www.a-ipower.com

When contacting support, please have your model number (SUA1500i) and serial number (if applicable) ready to expedite service.

	A-iPower SUA5800iED Dual Fuel Inverter Generator: Features, Specs, and Technology Detailed overview of the A-iPower SUA5800iED Dual Fuel Inverter Generator, including key features, technical specifications, control panel functions, and Fuel Sense technology. Learn about its 5800 starting watts, 224cc engine, and extended runtime capabilities.
	A-iPower SUA2000iD 2000 Watt Dual Fuel Inverter Generator Specifications and Features Detailed specifications and features for the A-iPower SUA2000iD 2000 Watt Dual Fuel Inverter Generator, including power output, fuel types, run time, noise level, and technical data.
	A-iPower XOS2300iD 2300 Watt Dual Fuel Inverter Generator Specifications and features for the A-iPower XOS2300iD, a 2300 Watt Dual Fuel Inverter Generator with Fuel Sense Technology, EPA certified, lightweight design, and clean power output.
	A-iPower SUA2000iP Generator Quick Start Guide Get your A-iPower SUA2000iP inverter generator up and running quickly with this essential quick start guide. Learn how to unpack, add oil and fuel, start the engine, connect loads, and properly shut down and store your generator. Includes vital safety information regarding carbon monoxide.
	A-iPOWER SUA3800i Generator Quick Start Guide Concise and SEO-optimized HTML guide for the A-iPOWER SUA3800i generator, covering unpacking, essential setup steps, starting procedures, and shutdown/storage instructions. Includes critical safety warnings regarding carbon monoxide.
	A-iPower SUA2000i Generator Quick Start Guide Quick start guide for the A-iPower SUA2000i portable inverter generator, covering setup, operation, and shutdown procedures.