Crosley CR7022A-BK Sloane 3-Speed Bluetooth Turntable and FM Radio Shelf System

Introduction

This manual provides essential instructions for the setup, operation, and maintenance of your Crosley CR7022A-BK Sloane 3-Speed Bluetooth Turntable and FM Radio Shelf System. This system combines a classic turntable with modern features, including Bluetooth connectivity, FM radio, USB playback, and vinyl-to-USB recording. Please read this manual thoroughly before use to ensure proper function and to maximize your listening experience.

Safety Information

WARNING: Proposition 65 Warning

This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

• Do not expose the unit to rain or moisture.
• Do not open the cabinet. Refer servicing to qualified personnel only.
• Ensure proper ventilation around the unit.
• Avoid placing the unit near heat sources or in direct sunlight.
• Use only the power adapter supplied with the unit.

What's in the Box

Carefully unpack all components and ensure you have the following items:

• Crosley Sloane Turntable Unit
• Matching Stereo Speakers (2)
• 45 RPM Adapter
• Power Adapter
• Clear Dust Cover

Product Overview

Familiarize yourself with the main components and controls of your Sloane system.

Front view of the Crosley Sloane Turntable System, showcasing the central unit with a clear dust cover and two matching black stereo speakers on either side.

The Crosley Sloane system positioned on a wooden shelf, highlighting the main unit's front panel with controls for power/mode, USB, and AUX input, along with the turntable and speakers.

Main Unit

• Turntable Platter: Where records are placed for playback.
• Tonearm: Holds the stylus (needle) for reading records.
• Speed Selector: Switch to select 33 1/3, 45, or 78 RPM.
• 45 RPM Adapter: Used for playing 7-inch records with large center holes.
• Dust Cover: Protects the turntable from dust when not in use.
• Control Panel: Includes buttons and knobs for power, mode selection, volume, tuning, USB, and AUX input.

Stereo Speakers

The system includes two matching stereo speakers for a full audio experience. These connect directly to the main turntable unit.

Rear view of the Crosley Sloane Turntable system, displaying the audio output jacks (RCA) for connecting the speakers and the power input.

Setup

Follow these steps for initial setup of your Crosley Sloane system.

1. Unpack Components: Carefully remove all items from the packaging. Retain packaging for future transport or storage.
2. Positioning: Place the main turntable unit and speakers on a stable, level surface. Ensure adequate space for ventilation and speaker placement.
3. Connect Speakers: Connect the included stereo speakers to the RCA output jacks on the rear of the main turntable unit. Match the red plug to the red jack (right channel) and the white/black plug to the white/black jack (left channel).
4. Connect Power: Insert the DC plug of the power adapter into the DC IN jack on the rear of the unit. Plug the AC adapter into a suitable wall outlet.
5. Dust Cover: Place the clear dust cover onto the hinges at the back of the turntable unit.

Operating Instructions

Turntable Operation

1. Power On: Press the Power/Mode button to turn on the unit.
2. Select Mode: Press the Mode button repeatedly until the display shows 'PHONO'.
3. Place Record: Place a record on the turntable platter. If playing a 7-inch record with a large center hole, place the 45 RPM adapter on the center spindle first.
4. Select Speed: Set the speed selector switch to the correct speed for your record (33 1/3, 45, or 78 RPM).
5. Start Playback: Gently lift the tonearm and move it over the desired track on the record. Lower the tonearm slowly onto the record. The platter will begin to spin.
6. Adjust Volume: Use the Volume knob to adjust the listening level.
7. Auto-Stop: The turntable features an auto-stop function that will stop the platter from spinning when the record finishes.

Bluetooth Operation

Close-up of the Crosley Sloane turntable playing a record, with a Bluetooth logo and a smartphone graphic indicating wireless streaming capability.

1. Select Mode: Press the Mode button repeatedly until the display shows 'BT' (Bluetooth). The unit will enter pairing mode, indicated by a flashing Bluetooth icon.
2. Enable Bluetooth: On your mobile device, enable Bluetooth and search for available devices.
3. Pair Device: Select 'Crosley Sloane' from the list of devices. Once paired, the Bluetooth icon on the unit will stop flashing.
4. Stream Audio: You can now stream audio from your device through the Sloane system's speakers.

FM Radio Operation

1. Select Mode: Press the Mode button repeatedly until the display shows 'FM'.
2. Tune Stations: Use the Tuning knob to scan for FM radio stations.
3. Adjust Volume: Use the Volume knob to adjust the listening level.

USB Playback and Recording

Diagram showing the Crosley Sloane Turntable with callouts for the clear dust cover, USB Playback port, and Vinyl Recording to USB Drive button.

1. Connect USB Drive: Insert a USB flash drive into the USB port on the front panel.
2. USB Playback: Press the Mode button until 'USB' is displayed. The unit will automatically begin playing compatible audio files from the USB drive. Use the track skip buttons to navigate.
3. Vinyl Recording to USB:
   • Ensure a USB drive is inserted and the unit is in 'PHONO' mode.
   • Start playing your vinyl record.
   • Press the 'REC' button on the front panel to begin recording. The recording indicator will illuminate.
   • Press 'REC' again to stop recording. The recorded audio will be saved to the USB drive.

AUX Input

1. Connect Device: Connect an external audio device (e.g., MP3 player, smartphone) to the AUX IN jack on the front panel using a 3.5mm audio cable (not included).
2. Select Mode: Press the Mode button until 'AUX' is displayed.
3. Play Audio: Play audio from your connected device. The sound will be output through the Sloane system's speakers.

Maintenance

• Cleaning the Unit: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners or solvents.
• Dust Cover: Keep the dust cover closed when the turntable is not in use to prevent dust accumulation on the platter and stylus.
• Stylus Care: Handle the tonearm and stylus with care. Avoid touching the stylus with your fingers. Clean the stylus periodically with a soft brush designed for stylus cleaning, brushing from back to front.
• Record Care: Keep your records clean and free of dust to ensure optimal sound quality and prolong stylus life.

Troubleshooting

If you encounter issues with your Crosley Sloane system, refer to the following common problems and solutions:

Specifications

Diagram illustrating the overall dimensions of the Crosley Sloane Turntable System, including width, height, and depth of the main unit and speakers.

Warranty and Support

Crosley products are designed in the USA and come with USA-based customer support. For warranty information or technical assistance, please refer to the official Crosley website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the Crosley Store on Amazon.