Energizer ENDLHD32A
Energizer F375 Floating Headlamp User Manual
Model: ENDLHD32A
Introduction
The Energizer WeatheReady Floating Headlamp (Model ENDLHD32A) is designed to provide powerful and reliable hands-free illumination for various activities, including outdoor adventures, work, and emergency situations. This headlamp features intense brightness, a long beam distance, and a durable, waterproof design that allows it to float for easy recovery if dropped in water. It operates on 3 AAA alkaline batteries, which are included.

Image: The Energizer F375 Floating Headlamp in red with its black head strap and three AAA batteries.
Product Features
- High Brightness: Delivers 375 lumens, providing powerful illumination.
- Long Beam Distance: Projects light up to 95 meters, covering a significant area.
- Dual Modes: Features high and low light modes for versatile use.
- Extended Runtime: Offers up to 14 hours of reliable light on the low setting.
- Waterproof and Floating Design: IP67 rated for water immersion and designed to float for easy retrieval.
- Durable Construction: Shatterproof lens and impact-resistant up to 3 meters.
- Comfortable Fit: Equipped with a floating head strap and a pivoting head for optimal comfort and adjustability.

Image: A diagram highlighting the durable construction of the headlamp, including its shatterproof lens, IP67 waterproof rating, ability to withstand a 3-meter drop, pivoting head, and floating head strap.
Setup
Battery Installation
The Energizer F375 Headlamp requires 3 AAA alkaline batteries (included). Follow these steps for proper installation:
- Locate the battery compartment on the back of the headlamp unit.
- Carefully open the battery compartment cover. This may require using a small flat tool or coin to pry it open if it's tightly sealed for waterproofing.
- Insert the 3 AAA batteries according to the polarity indicators (+ and -) inside the compartment. Ensure they are correctly oriented.
- Close the battery compartment cover firmly until it clicks into place, ensuring a secure, waterproof seal.

Image: A three-step visual guide demonstrating how to open the battery compartment, insert three AAA batteries, and close the compartment.
Head Strap Adjustment
The head strap is adjustable to ensure a comfortable and secure fit. The strap is designed to float, aiding in recovery if the headlamp is dropped in water.
- Place the headlamp on your forehead.
- Adjust the elastic strap by sliding the buckles on either side to achieve a snug yet comfortable fit around your head.
- Ensure the headlamp unit is centered and stable.
Operating Instructions
Power On/Off and Mode Selection
The headlamp features a single button for operation:
- Press the power button once to turn the headlamp on in High mode.
- Press the power button a second time to switch to Low mode.
- Press the power button a third time to turn the headlamp Off.
The pivoting head allows you to direct the light beam up or down as needed.

Image: A person wearing the Energizer headlamp, illuminating a path at night, demonstrating its 95-meter beam distance.
Video: An official product video demonstrating the Energizer WeatheReady Floating Headlamp's features, including its 375 lumens and IP67 waterproof rating, showing it in use and floating in water.
Maintenance
- Cleaning: Wipe the headlamp with a clean, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace all three AAA batteries simultaneously with new, high-quality alkaline batteries when the light dims significantly. Do not mix old and new batteries or different battery types.
- Storage: If storing the headlamp for an extended period (more than a few weeks), remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.
- Water Seal: Periodically inspect the rubber O-rings around the battery compartment for any signs of wear or damage. Ensure they are clean and properly seated to maintain the IP67 waterproof rating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. |
|
|
| Light is dim or flickers. |
|
|
| Water inside battery compartment. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | ENDLHD32A |
| Light Source Type | LED |
| Brightness | 375 Lumens (High Mode) |
| Beam Distance | Up to 95 Meters |
| Power Source | 3 x AAA Alkaline Batteries (Included) |
| Runtime | Up to 14 hours (Low Mode) |
| Water Resistance | IP67 Waterproof (Submersible up to 1 meter for 30 minutes) |
| Impact Resistance | Withstands 3-meter drop |
| Special Features | Floating design, Pivoting head, Shatterproof lens |
| Color | Red |
| Material | Plastic |
| Item Weight | 4.6 ounces |
| Product Dimensions | 5.04"D x 3.35"W x 1.77"H |
Warranty and Support
Energizer products are manufactured to high-quality standards. For information regarding warranty coverage, product support, or to report any issues, please refer to the official Energizer website or contact their customer service department. Keep your purchase receipt as proof of purchase.
You can visit the official Energizer store for more information: Energizer Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.