Product Overview
The ESR Stylus Pen for iPad is a versatile digital pen designed for seamless interaction with compatible iPad models. It features magnetic wireless charging, tilt sensitivity, palm rejection, and convenient shortcut functions to enhance your digital drawing, writing, and navigation experience.
Image: The ESR Stylus Pen, showcasing its magnetic wireless charging capability, USB-C charging port, and included replacement nibs.
Compatibility
The ESR Stylus Pen is designed to work with a wide range of iPad models released after 2018. Please refer to the table below and the accompanying images to confirm compatibility with your specific iPad model.
Image: A detailed compatibility chart indicating supported iPad models and their corresponding model numbers, along with wireless charging support.
Image: Visual representation of broad compatibility, distinguishing between iPads that support magnetic wireless charging and those requiring USB-C charging.
Setup and Charging
Initial Setup
The ESR Stylus Pen does not require Bluetooth pairing. Simply attach it magnetically to your compatible iPad (if supported) or connect it via USB-C to begin use.
Charging
The stylus supports two charging methods:
- Magnetic Wireless Charging: For iPads with a magnetic connector (e.g., iPad Pro 12.9/11, iPad Air 5/4, iPad Mini 6), the stylus can be charged by attaching it to the side of the iPad. A full charge takes approximately 2 hours.
- USB-C Charging: For iPads without magnetic charging, use the included USB-C cable to charge the stylus. A 30-minute charge provides significant power.
Image: Illustration of the two charging methods: magnetic wireless charging on the side of an iPad and direct USB-C cable charging.
Operating Instructions
Smooth and Precise Performance
The ESR Stylus Pen provides a smooth and precise writing and drawing experience with zero lag, mimicking the natural feel of a pen on paper.
Image: A user actively drawing on an iPad with the ESR Stylus Pen, highlighting its smooth and precise line creation.
Tilt Sensitivity
The stylus supports tilt sensitivity, allowing you to create thicker lines and realistic shading by simply tilting the pen's angle. This feature is ideal for artistic applications and note-taking.
Palm Rejection
With full palm rejection support, you can comfortably rest your hand on the iPad screen while writing or drawing without unintended marks or interference.
Image: Visual explanation of palm rejection, showing a hand resting on the screen while the stylus is in use, and examples of tilt sensitivity at different angles (90°, 60°, 30°).
Time-Saving Shortcut Button
The stylus features a convenient shortcut button at the top:
- Press Once: Returns to the Home Page.
- Double Press: Opens the Multitasking View.
Image: A close-up of the stylus tip illustrating the single-press action for Home Page and double-press action for Multitasking View.
Maintenance
Nib Replacement
The ESR Stylus Pen comes with three replacement nibs. To replace a nib, gently twist the old nib counter-clockwise to remove it, then screw in a new nib clockwise until secure.
Image: A close-up of the stylus nib, highlighting its 1.5mm tip and showing the three included replacement nibs.
Battery Care
If the stylus has been stored for an extended period and its battery power is very low, your iPad may not be able to charge it directly. In such cases, use the included USB-C charging cable to provide an initial charge to reactivate the stylus battery.
Troubleshooting
- Stylus not charging on iPad: If the stylus has been unused for a long time, its battery might be too low for the iPad to initiate charging. Connect the stylus directly to a power source using the USB-C cable for about 30 minutes, then try magnetic charging again.
- Lag or unresponsiveness: Ensure your iPad's operating system is up to date. If issues persist, try restarting your iPad.
- Palm rejection issues: Verify that your iPad model supports palm rejection with third-party styluses. Some older iPad models or specific apps might not fully support this feature.
- Tilt mode stuck: If the stylus remains in tilt mode after un-tilting, try briefly lifting the stylus from the screen and re-engaging. If the issue persists, a quick restart of the iPad may resolve it.
Specifications
| Brand | ESR |
| Model Number | 6C0030201 |
| Color | White |
| Material | Aluminum |
| Item Weight | 1.45 ounces (41 Grams) |
| Product Dimensions | 6.54 x 0.35 x 0.35 inches |
| Batteries | 1 Lithium Ion battery required |
| Compatible Devices | iPad (models after 2018) |
Warranty and Support
ESR products are designed for quality and reliability. For warranty information, technical support, or any inquiries regarding your ESR Stylus Pen, please visit our official website or contact our support team.
- Official Website: esrgear.com
- Email Support: esr.support@esrgear.com
